cswStackPowerPortLinkStatusChanged
CISCO-STACKWISE-MIB ·
.1.3.6.1.4.1.9.9.500.0.0.7
Object
notification
This notification is generated when the link status of a stack power port is changed from up to down or down to up. This notification is for informational purposes only and no action is required. cswStackPowerPortLinkStatus indicates link status of the stack power ports. cswSwitchNumCurrent indicates the switch number of the system. cswStackPowerPortName specifies a unique name of the stack power port as shown on the face plate of the system.
Context
- MIB
- CISCO-STACKWISE-MIB
- OID
.1.3.6.1.4.1.9.9.500.0.0.7- Type
- notification
- Status
- current
- Parent
- cswMIBNotifications
- Siblings
- 22
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cswStackPortChange This notification is generated when the state
of a stack port has changed. | notification | - | .1.3.6.1.4.1.9.9.500.0.0.1 |
| cswStackPowerInvalidTopology This notification is generated when an invalid stack power
topology is discovered by a switch. cswSwitchNumCurrent
indicates the switch number of the system where the invalid
topo… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.10 |
| cscwStackPowerBudgetWarrning This notification is generated when the switch power budget is
more than 1000W above its power supplies rated power output.
cswSwitchNumCurrent indicates the switch number of the … | notification | - | .1.3.6.1.4.1.9.9.500.0.0.11 |
| cswStackPowerInvalidInputCurrent This notification is generated when the input current in the
stack power cable is over the limit of the threshold retrieved
by the agent through cswStackPowerPortOverCurrentThresh… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.12 |
| cswStackPowerInvalidOutputCurrent This notification is generated when the output current in the
stack power cable is over the limit of the threshold retrieved
by the agent through cswStackPowerPortOverCurrentThres… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.13 |
| cswStackPowerUnderBudget This notification is generated when the switch's budget is less
than maximum possible switch power consumption.
cswSwitchNumCurrent indicates the switch number of the system
that … | notification | - | .1.3.6.1.4.1.9.9.500.0.0.14 |
| cswStackPowerUnbalancedPowerSupplies This notification is generated when the switch has no power
supply but another switch in the same stack has more than one
power supplies. cswStackPowerName specifies a unique name… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.15 |
| cswStackPowerInsufficientPower This notification is generated when the switch's power stack
does not have enough power to bring up all the switches in the
power stack. cswStackPowerName specifies a unique name … | notification | - | .1.3.6.1.4.1.9.9.500.0.0.16 |
| cswStackPowerPriorityConflict This notification is generated when the switch's power
priorities are conflicting with power priorities of another
switch in the same power stack. cswStackPowerPortName specifies
… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.17 |
| cswStackPowerUnderVoltage This notification is generated when the switch had an under
voltage condition on last boot up. cswSwitchNumCurrent
indicates the switch number of the system that was forced
down w… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.18 |
| cswStackPowerGLS This notification is generated when the switch had to shed
loads based on a sustained over load (SOC) condition.
cswSwitchNumCurrent indicates the switch number of the system
that… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.19 |
| cswStackNewMaster This notification is generated when a new master has been
elected. The notification will contain the cswSwitchNumCurrent
object to indicate the new master ID. | notification | - | .1.3.6.1.4.1.9.9.500.0.0.2 |
| cswStackPowerILS This notification is generated when the switch had to shed
loads based on power supply fail condition. cswSwitchNumCurrent
indicates the switch number of the system that goes thro… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.20 |
| cswStackPowerSRLS This notification is generated when the switch had to shed
loads based on loss of a system in ring topology.
cswSwitchNumCurrent indicates the switch number of the system
that det… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.21 |
| cswStackPowerSSLS This notification is generated when the switch had to shed
loads based on loss of a system in star topology.
cswSwitchNumCurrent indicates the switch number of the system
that det… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.22 |
| cswStackMemberToBeReloadedForUpgrade This notification is generated when a member is to be reloaded
for upgrade. | notification | - | .1.3.6.1.4.1.9.9.500.0.0.23 |
| cswStackMismatch This notification is generated when a new member attempt
to join the stack but was denied due to a mismatch. The
cswSwitchState object will indicate the type of mismatch. | notification | - | .1.3.6.1.4.1.9.9.500.0.0.3 |
| cswStackRingRedundant This notification is generated when the redundancy of the
ring has changed. | notification | - | .1.3.6.1.4.1.9.9.500.0.0.4 |
| cswStackNewMember This notification is generated when a new member joins the
stack. | notification | - | .1.3.6.1.4.1.9.9.500.0.0.5 |
| cswStackMemberRemoved This notification is generated when a member is removed
from the stack. | notification | - | .1.3.6.1.4.1.9.9.500.0.0.6 |
| cswStackPowerPortOperStatusChanged This notification is generated when the operational status of a
stack power port is changed from enabled to disabled or from
disabled to enabled. This notification is for informat… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.8 |
| cswStackPowerVersionMismatch This notification is generated when the major version of the
stack power protocol is different from the other members of the
power stack. Upon receiving this notification, the use… | notification | - | .1.3.6.1.4.1.9.9.500.0.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cswStackPowerPortLinkStatus This object is used to describe the link status of the stack
port. This object will have following valid
values,
up(1) : The port is connected and operational
… | column | Enumeration | .1.3.6.1.4.1.9.9.500.1.3.2.1.5 |
| cswSwitchNumCurrent This object contains the current switch identification number.
This number should match any logical labeling on the switch.
For example, a switch whose interfaces are labeled
'int… | column | CswSwitchNumber | .1.3.6.1.4.1.9.9.500.1.2.1.1.1 |
| cswStackPowerPortName This object specifies a unique name of the stack power port as
shown on the face plate of the system. A zero-length string
indicates no name is assigned. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.500.1.3.2.1.7 |