cie1000LldpConfigMedGlobalDatum
CIE1000-LLDP-MIB ·
.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.7
Object
scalar
r/w
CIE1000lldpmedDatumType
Setting datum to configure the datum (geodetic system) to use.
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich;The associated vertical datum is the North American
Vertical Datum of 1988 (NAVD88).This datum pair is to be used when
referencing locations on land, not near tidal water(which would use
Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
(MLLW). This datum pair is to be used when referencing locations on
water/sea/ocean.
Context
- MIB
- CIE1000-LLDP-MIB
- OID
.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cie1000LldpConfigMedGlobal
- Siblings
- 7
Syntax
CIE1000lldpmedDatumType
- Source
- CIE1000lldpmedDatumType
- Base type
Enumeration
Values & Constraints
Type Values
1 | wgs84 |
2 | nad83navd88 |
3 | nad83mllw |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cie1000LldpConfigMedGlobalFastRepeatCount Number of times to repeat LLDP frame transmission at fast start
Rapid startup and Emergency Call Service Location Identification
Discovery of endpoints is a critically … | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.1 |
| cie1000LldpConfigMedGlobalLatitude Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator. | scalar | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.2 |
| cie1000LldpConfigMedGlobalLongitude Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian. | scalar | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.3 |
| cie1000LldpConfigMedGlobalAltitudeType Setting altitude type
Possible to select between two altitude types (floors or meters).
Meters are representing meters of altitude defined by the vertical
datum specifi… | scalar | CIE1000lldpmedAltitudeType | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.4 |
| cie1000LldpConfigMedGlobalAltitude Altitude value in 2s-complement as specified in RFC 3825 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.5 |
| cie1000LldpConfigMedGlobalElinAddr Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This… | scalar | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.6 |
| cie1000LldpConfigMedGlobalCountryCode The two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US. | scalar | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.8 |