cie1000LldpConfigMedGlobal
CIE1000-LLDP-MIB ·
.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4
Object
node
No description available.
Context
- MIB
- CIE1000-LLDP-MIB
- OID
.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4- Type
- node
- Parent
- cie1000LldpConfigMed
- Siblings
- 5
- Children
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cie1000LldpConfigMedTable This is a table to configure LLDP MEDIA configurations for a specific
interface. | table | - | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.1 |
| cie1000LldpConfigMedPolicyTable This is a table to configure LLDP MED Policies for the device. | table | - | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.2 |
| cie1000LldpConfigMedPolicyListTable Each interface can be mapped to multiple policies. Set to TRUE in order
to enable the corresponding policy to be transmitted at the interface.
It is a requirement that the policy … | table | - | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.3 |
| cie1000LldpConfigMedLocationInfTable The civic address location information. Each civic address can contain
up to 250 characters, but the total amount of characters for the
combined civic address locations must not e… | table | - | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.5 |
| cie1000LldpConfigMedPolicyRowEditor | node | - | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.6 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cie1000LldpConfigMedGlobalFastRepeatCount Number of times to repeat LLDP frame transmission at fast start
Rapid startup and Emergency Call Service Location Identification
Discovery of endpoints is a critically … | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.1 |
| cie1000LldpConfigMedGlobalLatitude Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator. | scalar | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.2 |
| cie1000LldpConfigMedGlobalLongitude Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian. | scalar | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.3 |
| cie1000LldpConfigMedGlobalAltitudeType Setting altitude type
Possible to select between two altitude types (floors or meters).
Meters are representing meters of altitude defined by the vertical
datum specifi… | scalar | CIE1000lldpmedAltitudeType | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.4 |
| cie1000LldpConfigMedGlobalAltitude Altitude value in 2s-complement as specified in RFC 3825 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.5 |
| cie1000LldpConfigMedGlobalElinAddr Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This… | scalar | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.6 |
| cie1000LldpConfigMedGlobalDatum Setting datum to configure the datum (geodetic system) to use.
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - W… | scalar | CIE1000lldpmedDatumType | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.7 |
| cie1000LldpConfigMedGlobalCountryCode The two-letter ISO 3166 country code in capital ASCII letters -
Example: DK, DE or US. | scalar | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.8 |