cie1000LldpConfigMedGlobalAltitudeType

CIE1000-LLDP-MIB · .1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.4
MIB view Table view

Object

scalar r/w CIE1000lldpmedAltitudeType 
Setting altitude type
          
Possible to select between two altitude types (floors or meters).
Meters are representing meters of altitude defined by the vertical
datum specified. Floors are representing altitude in a form more
relevant in buildings which have different floor-to-floor dimensions.
An altitude = 0.0 is meaningful even outside a building, and represents
ground level at the given latitude and longitude. Inside a building,
0.0 represents the floor level associated with ground level at the main
entrance.

Context

MIB
CIE1000-LLDP-MIB
OID
.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.4
Type
scalar
Access
readwrite
Status
current
Parent
cie1000LldpConfigMedGlobal
Siblings
7

Syntax

CIE1000lldpmedAltitudeType
Source
CIE1000lldpmedAltitudeType
Base type
Enumeration

Values & Constraints

Type Values
1meters
2floors

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cie1000LldpConfigMedGlobalFastRepeatCount
Number of times to repeat LLDP frame transmission at fast start Rapid startup and Emergency Call Service Location Identification Discovery of endpoints is a critically …
scalarUnsigned32.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.1
cie1000LldpConfigMedGlobalLatitude
Latitude degrees in 2s-complement as specified in RFC 3825. Positive numbers are north of the equator and negative numbers are south of the equator.
scalarCIE1000-TCCIE1000Integer64.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.2
cie1000LldpConfigMedGlobalLongitude
Longitude degrees in 2s-complement as specified in RFC 3825. Positive values are East of the prime meridian and negative numbers are West of the prime meridian.
scalarCIE1000-TCCIE1000Integer64.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.3
cie1000LldpConfigMedGlobalAltitude
Altitude value in 2s-complement as specified in RFC 3825
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.5
cie1000LldpConfigMedGlobalElinAddr
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This…
scalarOctetString.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.6
cie1000LldpConfigMedGlobalDatum
Setting datum to configure the datum (geodetic system) to use. The Map Datum is used for the coordinates given in these options: WGS84: (Geographical 3D) - W…
scalarCIE1000lldpmedDatumType.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.7
cie1000LldpConfigMedGlobalCountryCode
The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US.
scalarOctetString.1.3.6.1.4.1.9.9.832.1.34.1.2.3.4.8