dataPortFiberStatus
CAMBIUM-PTP800-MIB ·
.1.3.6.1.4.1.17713.8.13.8
Object
scalar
Enumeration
If the fiber interface on the data Ethernet port is not OK, there are three possible causes: 1) the fiber interface has been installed but disabled, 2) the interface could not be established even though no LOS was detected (i.e. an optical carrier was detected, which could be due to a broken TX fiber, or because the interface is disabled at the other end of the fiber link), or 3) the interface could not be established and LOS is detected (i.e. no optical carrier is detected). NB: a change of status may generate an SNMP trap and/or SMTP email alert
Context
- MIB
- CAMBIUM-PTP800-MIB
- OID
.1.3.6.1.4.1.17713.8.13.8- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- alarms
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | ok |
1 | installedFiberNotLicensed |
2 | noFiberLinkEstablishedButLOSNotDetected |
3 | noFiberLinkEstablishedAndLOSDetected |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| unitOutOfCalibration The unit is out of calibration | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.1 |
| softwareVersionRemoteCompatibility Indicates a mismatch of software versions at the two
ends of the wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.10 |
| managementPortDisabledWarning The SNMP ifAdminStatus of the out-of-band management
Ethernet interface has disabled Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.12 |
| rFUStatus Current status of the RFU. A state of 'ok' indicates
that the RFU is fully operational, although may not be
transmitting. | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.16 |
| managementPortConfigurationMismatch The detection of Ethernet fragments (runt packets) on
the out-of-band management Ethernet port when the link is
in full duplex is an indication of an auto-negotiation or
forced… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.17 |
| secureModeAlarm The secure mode (e.g. FIPS, UC-APL) state of the unit.
The secure mode is not configured(1) state indicates that
the unit is capable of secure mode operation, and one or
more o… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.18 |
| rFUPlatformCompatibility This indicates when the RFU currently connected to the
CMU does not match the RFU Platform which was installed.
Either re-run the Installation Wizard or connect the
correct RFU | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.19 |
| rFUProtectionCompatibility This indicates when the IRFU branching unit
configuration is not compatible with the protection
configuration or if the left hand transceiver has been
configured as Secondary o… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.20 |
| encryptionEnabledMismatch Encryption has been enabled on one end of the wireless
link but not the other | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.3 |
| dataPortDisabledWarning The SNMP ifAdminStatus of the data Ethernet interface
has disabled Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.7 |
| dataPortConfigurationMismatch The detection of Ethernet fragments (runt packets) on
the data Ethernet port when the link is in full duplex is
an indication of an auto-negotiation or forced
configuration mis… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.9 |