CAMBIUM-PTP800-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
25

ethernetPriorityTable

table
.1.3.6.1.4.1.17713.8.6.15 · 1 row entry · 2 columns
Open in standard view 
A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority.
ethernetPriorityTableEntry entry .1.3.6.1.4.1.17713.8.6.15.1
Table EthernetPriorityTable
Indexes
ethernetPriorityTableIndex
Column Syntax OID
ethernetPriorityQueueMapping
Configures the classification of this Ethernet priority
(also known as IEEE 802.1p value) to an egress queue at
the wireless port.
Enumerationr/w
Enumerated Values:
0q0
1q1
2q2
3q3
4q4
5q5
6q6
7q7
 .1.3.6.1.4.1.17713.8.6.15.1.1
ethernetPriorityTableIndex
Ethernet priority flag, used to index values in the
ethernetPriorityTable.
Enumeration
Enumerated Values:
1p0
2p1
3p2
4p3
5p4
6p5
7p6
8p7
9untagged
 .1.3.6.1.4.1.17713.8.6.15.1.2

l2CPPriorityTable

table
.1.3.6.1.4.1.17713.8.6.32 · 1 row entry · 2 columns
Open in standard view 
A priority queue mapping table. This is a list of packet queues associated with the different layer 2 control protocol frameworks.
l2CPPriorityTableEntry entry .1.3.6.1.4.1.17713.8.6.32.1
Table L2CPPriorityTable
Indexes
l2CPPriorityTableIndex
Column Syntax OID
l2CPPriorityQueueMapping
Configures the classification of this layer two control
protocol (L2CP) to an egress queue at the wireless port
Enumerationr/w
Enumerated Values:
0q0
1q1
2q2
3q3
4q4
5q5
6q6
7q7
 .1.3.6.1.4.1.17713.8.6.32.1.1
l2CPPriorityTableIndex
layer 2 control protocol, used to index values in the
l2CPPriorityTable.
Enumeration
Enumerated Values:
1bridge
2gARPMRP
3cFM
4rAPS
5eAPS
 .1.3.6.1.4.1.17713.8.6.32.1.2

iPDSCPPriorityTable

table
.1.3.6.1.4.1.17713.8.6.38 · 1 row entry · 2 columns
Open in standard view 
A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority.
iPDSCPPriorityTableEntry entry .1.3.6.1.4.1.17713.8.6.38.1
Table IPDSCPPriorityTable
Indexes
iPDSCPPriorityTableIndex
Column Syntax OID
iPDSCPPriorityQueueMapping
Configures the classification of this IP differentiated
services code point (DSCP) value to an egress queue at
the wireless port
Enumerationr/w
Enumerated Values:
0q0
1q1
2q2
3q3
4q4
5q5
6q6
7q7
 .1.3.6.1.4.1.17713.8.6.38.1.1
iPDSCPPriorityTableIndex
IP DSCP priority flag, used to index values in the
iPDSCPPriorityTable
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.17713.8.6.38.1.2

mPLSTCPriorityTable

table
.1.3.6.1.4.1.17713.8.6.40 · 1 row entry · 2 columns
Open in standard view 
A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority.
mPLSTCPriorityTableEntry entry .1.3.6.1.4.1.17713.8.6.40.1
Table MPLSTCPriorityTable
Indexes
mPLSTCPriorityTableIndex
Column Syntax OID
mPLSTCPriorityQueueMapping
Configures the classification of this MPLS traffic class
(the field formerly known as EXP) to an egress queue at
the wireless port
Enumerationr/w
Enumerated Values:
0q0
1q1
2q2
3q3
4q4
5q5
6q6
7q7
 .1.3.6.1.4.1.17713.8.6.40.1.1
mPLSTCPriorityTableIndex
MPLS TC priority flag, used to index values in the
mPLSTCPriorityTable
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.17713.8.6.40.1.2

sNMPTrapTable

table
.1.3.6.1.4.1.17713.8.16.10 · 1 row entry · 6 columns
Open in standard view 
SNMP trap configuration table.
sNMPTrapTableEntry entry .1.3.6.1.4.1.17713.8.16.10.1
Table SNMPTrapTable
Indexes
sNMPTrapTableIndex
Column Syntax OID
sNMPTrapTableIndex
SNMP trap value, used to index the SNMPTrapTable.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.17713.8.16.10.1.1
sNMPTrapIPAddress
The IP address to which all SNMP Traps are sent. NB: A
system reboot is required to activate changes to this
attribute.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.17713.8.16.10.1.2
sNMPTrapPortNumber
Destination port for SNMP Traps (default=162). NB: A
system reboot is required to activate changes to this
attribute.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.17713.8.16.10.1.3
sNMPTrapInternetAddressType
The type of Internet address specified by the associated
sNMPTrapInternetAddress.
Enumeration
Enumerated Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
5unknown6
6unknown7
7unknown8
8unknown9
9unknown10
10unknown11
11unknown12
12unknown13
13unknown14
14unknown15
15unknown16
16dns
 .1.3.6.1.4.1.17713.8.16.10.1.4
sNMPTrapInternetAddress
The Internet address to which all SNMP Traps are sent.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.17713.8.16.10.1.5
sNMPTrapReceiverEnabled
A value of 0 disables the sending of SNMP trap to
corresponding receiver. A value of 1 enables the sending
of SNMP trap to corresponding receiver.
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.17713.8.16.10.1.6

sNTPServerTable

table
.1.3.6.1.4.1.17713.8.17.15 · 1 row entry · 6 columns
Open in standard view
sNTPServerTableEntry entry .1.3.6.1.4.1.17713.8.17.15.1
Table SNTPServerTable
Indexes
sNTPServerTableIndex
Column Syntax OID
sNTPServerTableIndex
Index range for the SNTPServerTable.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.17713.8.17.15.1.1
sNTPServerIPAddress
The IP address of a valid SNTP server
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.17713.8.17.15.1.2
sNTPServerPortNumber
The IP port number of the SNTP server. Defaults to port
123.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.17713.8.17.15.1.3
sNTPServerResponse
The most recent response received from the SNTP server,
if used
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.17713.8.17.15.1.4
sNTPServerInternetAddressType
The type of Internet address specified by the associated
sNTPServerInternetAddress.
Enumeration
Enumerated Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
5unknown6
6unknown7
7unknown8
8unknown9
9unknown10
10unknown11
11unknown12
12unknown13
13unknown14
14unknown15
15unknown16
16dns
 .1.3.6.1.4.1.17713.8.17.15.1.5
sNTPServerInternetAddress
The Internet address of a valid SNTP server
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.17713.8.17.15.1.6

userTable

table
.1.3.6.1.4.1.17713.8.29.2 · 1 row entry · 5 columns
Open in standard view 
The User Table Control group contains objects specifically for user account management.
userTableEntry entry .1.3.6.1.4.1.17713.8.29.2.1
Table UserTable
Indexes
userTableIndex
Column Syntax OID
userTableIndex
used to index values in the userTable.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.17713.8.29.2.1.1
userName
User name which must be entered, along with the
appropriate password, in order to gain access to the
system.
OctetString .1.3.6.1.4.1.17713.8.29.2.1.2
userRole
Role of the selected user. A Security Officer has access
to and can modify all settings. A System Administrator
has access to and can modify all non-security settings. A
Read Only user can view settings, but cannot m…
Enumeration
Enumerated Values:
0readOnly
1systemAdministrator
2securityOfficer
 .1.3.6.1.4.1.17713.8.29.2.1.3
userEnabled
Enable / Disable the selected user
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.17713.8.29.2.1.4
userPassword
User password, which must be entered in order to gain
access to the system.
OctetStringr/w .1.3.6.1.4.1.17713.8.29.2.1.5