alarms
CAMBIUM-PTP800-MIB ·
.1.3.6.1.4.1.17713.8.13
Object
node
No description available.
Context
- MIB
- CAMBIUM-PTP800-MIB
- OID
.1.3.6.1.4.1.17713.8.13- Type
- node
- Parent
- ptp800
- Siblings
- 24
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| phyControl | node | - | .1.3.6.1.4.1.17713.8.10 |
| phyStatus | node | - | .1.3.6.1.4.1.17713.8.12 |
| smtp | node | - | .1.3.6.1.4.1.17713.8.15 |
| snmpControl | node | - | .1.3.6.1.4.1.17713.8.16 |
| sntp | node | - | .1.3.6.1.4.1.17713.8.17 |
| reset | node | - | .1.3.6.1.4.1.17713.8.18 |
| versions | node | - | .1.3.6.1.4.1.17713.8.19 |
| pubStats | node | - | .1.3.6.1.4.1.17713.8.20 |
| encryption | node | - | .1.3.6.1.4.1.17713.8.22 |
| rfu | node | - | .1.3.6.1.4.1.17713.8.23 |
| radioLicense | node | - | .1.3.6.1.4.1.17713.8.24 |
| protectionConfig | node | - | .1.3.6.1.4.1.17713.8.25 |
| protectionStatus | node | - | .1.3.6.1.4.1.17713.8.26 |
| protectionStats | node | - | .1.3.6.1.4.1.17713.8.27 |
| syslogControl | node | - | .1.3.6.1.4.1.17713.8.28 |
| aAAControl | node | - | .1.3.6.1.4.1.17713.8.29 |
| bridge | node | - | .1.3.6.1.4.1.17713.8.4 |
| configuration | node | - | .1.3.6.1.4.1.17713.8.5 |
| ethernet | node | - | .1.3.6.1.4.1.17713.8.6 |
| licence | node | - | .1.3.6.1.4.1.17713.8.8 |
| management | node | - | .1.3.6.1.4.1.17713.8.9 |
| supplementary | node | - | .1.3.6.1.4.1.17713.8.96 |
| ptpGroups | node | - | .1.3.6.1.4.1.17713.8.98 |
| ptpTraps | node | - | .1.3.6.1.4.1.17713.8.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| unitOutOfCalibration The unit is out of calibration | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.1 |
| softwareVersionRemoteCompatibility Indicates a mismatch of software versions at the two
ends of the wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.10 |
| managementPortDisabledWarning The SNMP ifAdminStatus of the out-of-band management
Ethernet interface has disabled Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.12 |
| rFUStatus Current status of the RFU. A state of 'ok' indicates
that the RFU is fully operational, although may not be
transmitting. | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.16 |
| managementPortConfigurationMismatch The detection of Ethernet fragments (runt packets) on
the out-of-band management Ethernet port when the link is
in full duplex is an indication of an auto-negotiation or
forced… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.17 |
| secureModeAlarm The secure mode (e.g. FIPS, UC-APL) state of the unit.
The secure mode is not configured(1) state indicates that
the unit is capable of secure mode operation, and one or
more o… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.18 |
| rFUPlatformCompatibility This indicates when the RFU currently connected to the
CMU does not match the RFU Platform which was installed.
Either re-run the Installation Wizard or connect the
correct RFU | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.19 |
| rFUProtectionCompatibility This indicates when the IRFU branching unit
configuration is not compatible with the protection
configuration or if the left hand transceiver has been
configured as Secondary o… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.20 |
| encryptionEnabledMismatch Encryption has been enabled on one end of the wireless
link but not the other | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.3 |
| dataPortDisabledWarning The SNMP ifAdminStatus of the data Ethernet interface
has disabled Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.7 |
| dataPortFiberStatus If the fiber interface on the data Ethernet port is not
OK, there are three possible causes: 1) the fiber
interface has been installed but disabled, 2) the
interface could not … | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.8 |
| dataPortConfigurationMismatch The detection of Ethernet fragments (runt packets) on
the data Ethernet port when the link is in full duplex is
an indication of an auto-negotiation or forced
configuration mis… | scalar | Enumeration | .1.3.6.1.4.1.17713.8.13.9 |