channelChangeTrap

CAMBIUM-PTP600-MIB · .1.3.6.1.4.1.17713.6.99.0.1

Object

notification

The PTP radio has changed wireless channel.
This has been caused by either
i) mandatory radar avoidance,
   a DFS impulsive interference event will also be
   detected,
or
ii) Dynamic Spectrum Optimization, (DSO)
    DSO improves link performance by selecting the
    most appropriate transmit and receive channels
    with the lowest level of interference.

Context

MIB: CAMBIUM-PTP600-MIB
OID: .1.3.6.1.4.1.17713.6.99.0.1
Type: notification
Status: current
Parent: ptpTrapPrefix
Siblings: 29

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
installArmStateTrap Indicates if the unit is being installed. NB: a change of state may generate an SNMP trap and/or SMTP email alert	notification	-	`.1.3.6.1.4.1.17713.6.99.0.10`
unitOutOfCalibrationTrap The unit is out of calibration	notification	-	`.1.3.6.1.4.1.17713.6.99.0.11`
incompatibleRegionCodesTrap The master and slave units have incompatible region codes. NB: Both units must have compatible license keys	notification	-	`.1.3.6.1.4.1.17713.6.99.0.14`
noWirelessChannelAvailableTrap Spectrum Management was unable to locate a suitable wireless channel to operate on	notification	-	`.1.3.6.1.4.1.17713.6.99.0.15`
wirelessLinkDisabledWarningTrap The SNMP ifAdminStatus of the wireless interface has disabled wireless traffic	notification	-	`.1.3.6.1.4.1.17713.6.99.0.16`
dataPortDisabledWarningTrap The SNMP ifAdminStatus of the Ethernet interface has disabled Ethernet traffic	notification	-	`.1.3.6.1.4.1.17713.6.99.0.17`
dataPortFiberStatusTrap If the fiber link is not OK, there are three possible causes: Either the fiber link has been installed but disabled (because the license key does not include fiber support), th…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.18`
dataPortConfigurationMismatchTrap The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch	notification	-	`.1.3.6.1.4.1.17713.6.99.0.19`
dfsImpulsiveInterferenceTrap DFS impulsive interference detected event	notification	-	`.1.3.6.1.4.1.17713.6.99.0.2`
incompatibleMasterAndSlaveTrap A non-zero value indicates that the master and slave ends of a link are different hardware products, or have different software versions. NB: It is very unusual to detect this,…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.20`
sNTPSyncTrap If SNTP Sync fails then check the server settings in the Remote Management page, or disable SNTP	notification	-	`.1.3.6.1.4.1.17713.6.99.0.21`
tDDSynchronizationAlarmTrap Not Synchronized indicates failure of the external timing system for a period greater than the holdover timer. TDD frame timing will have drifted, and this link may cause inter…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.22`
managementPortStatusTrap Current status of the out-of-band management link. NB: a change of state may generate an SNMP trap and/or SMTP email alert	notification	-	`.1.3.6.1.4.1.17713.6.99.0.23`
managementPortDisabledWarningTrap The SNMP ifAdminStatus of the out-of-band management interface has disabled Ethernet traffic	notification	-	`.1.3.6.1.4.1.17713.6.99.0.24`
linkModeOptimizationMismatchTrap The remote node of this link has been configured with a different link mode optimization	notification	-	`.1.3.6.1.4.1.17713.6.99.0.25`
managementPortConfigurationMismatchTrap The detection of Ethernet fragments (runt packets) when the link is in full duplex is an indication of an auto-negotiation or forced configuration mismatch. This alarm is only …	notification	-	`.1.3.6.1.4.1.17713.6.99.0.28`
dataPortStatusTrap Current status of the Ethernet link. NB: a change of state may generate an SNMP trap and/or SMTP email alert	notification	-	`.1.3.6.1.4.1.17713.6.99.0.3`
syslogStateTrap The syslog service has been enabled or disabled	notification	-	`.1.3.6.1.4.1.17713.6.99.0.30`
syslogLocalNearlyFullTrap The syslog local log is nearly full (90%)	notification	-	`.1.3.6.1.4.1.17713.6.99.0.31`
syslogLocalWrappedTrap The syslog local log has wrapped	notification	-	`.1.3.6.1.4.1.17713.6.99.0.32`
syslogClientTrap Enable or disable the syslog client	notification	-	`.1.3.6.1.4.1.17713.6.99.0.33`
secureModeAlarmTrap The secure mode (e.g. FIPS, UC-APL) state of the unit. The secure mode is not configured(1) state indicates that the unit is capable of secure mode operation, and one or more o…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.34`
ethernetBridgingStatusAlarmTrap Ethernet traffic bridging is disabled because the wireless link is not operating at the configured Lowest Ethernet Modulation Mode	notification	-	`.1.3.6.1.4.1.17713.6.99.0.35`
telecomsChannelAStatusTrap Current status of telecoms channel A. NB: a change of state may generate an SNMP trap and/or SMTP email alert	notification	-	`.1.3.6.1.4.1.17713.6.99.0.4`
telecomsChannelBStatusTrap Current status of telecoms channel B. NB: a change of state may generate an SNMP trap and/or SMTP email alert	notification	-	`.1.3.6.1.4.1.17713.6.99.0.5`
channelALoopbackTrap The loopback status of telecoms channel A. This is intended for installation testing and should be set to 'None' for normal operation. The wire connections to a unit can be tes…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.6`
channelBLoopbackTrap The loopback status of telecoms channel B. This is intended for installation testing and should be set to 'None' for normal operation. The wire connections to a unit can be tes…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.7`
regionCodeTrap The region code prohibits the wireless unit from operating outside the regulated limits. An invalid region code indicates a corrupted license key. NB: a change of state may gen…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.8`
installStatusTrap A non-zero value indicates that signalling was received with the wrong MAC address or a mismatched link name. NB: It is very unusual to detect this, because units with mis-conf…	notification	-	`.1.3.6.1.4.1.17713.6.99.0.9`

Notification Objects