nnbundleLinkT1Num
BUNDLE-MIB ·
.1.3.6.1.4.1.562.73.1.1.1.13.2.1.1
Object
column
SNMPv2-SMIInteger32
bundleLinkT1Num is the number of the T1 link being added to a specific bundle. For example, to assign link number 4, the value of this parameter should be set to 4. However, the design of SNMP's link creation is different from that of the system CLI. In SNMP, only one link can be created at a time whereas in the system CLI, multiple links can be configured in a single request. This parameter is mandatory for row creation in the interfaces with CT3 and T1 link types .
Context
- MIB
- BUNDLE-MIB
- OID
.1.3.6.1.4.1.562.73.1.1.1.13.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- nnbundleLinkEntry
- Table
- nnbundleLinkTable
- Siblings
- 9
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnbundleLinkRowStatus bundleLinkRowStatus is used to add or delete
a row in the table. To create a row, this
parameter is set to value 4(createAndGo). To
delete a row, this parameter is set to a val… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.10 |
| nnbundleLinkTimeSlots bundleLinkTimeSlots indicates the DS0 channels
in a fractional T1 link. The LSB in the OCTET
STRING represents DS0 channel number 1. For
example, to assign DS0 channels 1-4, th… | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.2 |
| nnbundleLinkType bundleLinkType specifies the interface type
(i.e.,CT3,T1,T3,HSSI,V35,X21,S530,S530A,S449,S232 etc.,)
of the link being assigned to the bundle. This is a
mandatory parameter for… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.3 |
| nnbundleLinkSpeed The bundleLinkSpeed specifies the transmission
speed of all DS0 channels in a bundle. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.4 |
| nnbundleLinkInvertedData Setting bundleLinkInvertedData parameter to
true will have the system invert data on all
DS0 channels before transmission. Data
inversion is used only for HDLC-encapsulated
bu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.5 |
| nnbundleLinkPhysIfNum bundleLinkPhysIfNum specifies the interface
number of the interface type such as CT3,
HSSI, T3 on which this link is being created.
This variable holds significance only for
li… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.6 |
| nnbundleLinkDiffDelay bundleLinkDiffDelay specifies the maximum
differential delay allowed on the links in a
multilink bundle. If the packet delay on any
link exceeds the differential delay set for… | column | milli-seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.7 |
| nnbundleLinkBw bundleLinkBw indicates the bandwidth of the
link. The bandwidth of an individual link
depends upon its configuration. For example,
in a link of type T1, its bandwidth will
d… | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.8 |
| nnbundleLinkStatus bundleLinkStatus indicates whether a
particular link in a bundle is up or down.
The link can go down due to various reasons
such as differential delay, a broken link,
or nego… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.9 |