nnbundleLinkBw
BUNDLE-MIB ·
.1.3.6.1.4.1.562.73.1.1.1.13.2.1.8
Object
bundleLinkBw indicates the bandwidth of the link. The bandwidth of an individual link depends upon its configuration. For example, in a link of type T1, its bandwidth will depend upon whether the link is a full T1 or a fractional T1 consisting of 24 DS0 timeslots.
Context
- MIB
- BUNDLE-MIB
- OID
.1.3.6.1.4.1.562.73.1.1.1.13.2.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- kbps
- Parent
- nnbundleLinkEntry
- Table
- nnbundleLinkTable
- Siblings
- 9
Syntax
kbps SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nnbundleLinkT1Num bundleLinkT1Num is the number of the T1 link
being added to a specific bundle. For example,
to assign link number 4, the value of this
parameter should be set to 4. However, th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.1 |
| nnbundleLinkRowStatus bundleLinkRowStatus is used to add or delete
a row in the table. To create a row, this
parameter is set to value 4(createAndGo). To
delete a row, this parameter is set to a val… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.10 |
| nnbundleLinkTimeSlots bundleLinkTimeSlots indicates the DS0 channels
in a fractional T1 link. The LSB in the OCTET
STRING represents DS0 channel number 1. For
example, to assign DS0 channels 1-4, th… | column | OctetString | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.2 |
| nnbundleLinkType bundleLinkType specifies the interface type
(i.e.,CT3,T1,T3,HSSI,V35,X21,S530,S530A,S449,S232 etc.,)
of the link being assigned to the bundle. This is a
mandatory parameter for… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.3 |
| nnbundleLinkSpeed The bundleLinkSpeed specifies the transmission
speed of all DS0 channels in a bundle. | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.4 |
| nnbundleLinkInvertedData Setting bundleLinkInvertedData parameter to
true will have the system invert data on all
DS0 channels before transmission. Data
inversion is used only for HDLC-encapsulated
bu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.5 |
| nnbundleLinkPhysIfNum bundleLinkPhysIfNum specifies the interface
number of the interface type such as CT3,
HSSI, T3 on which this link is being created.
This variable holds significance only for
li… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.6 |
| nnbundleLinkDiffDelay bundleLinkDiffDelay specifies the maximum
differential delay allowed on the links in a
multilink bundle. If the packet delay on any
link exceeds the differential delay set for… | column | milli-seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.7 |
| nnbundleLinkStatus bundleLinkStatus indicates whether a
particular link in a bundle is up or down.
The link can go down due to various reasons
such as differential delay, a broken link,
or nego… | column | Enumeration | .1.3.6.1.4.1.562.73.1.1.1.13.2.1.9 |