bseeMultiHostAllowNonEapRadiusAssignedVlan
BAY-STACK-EAPOL-EXTENSION-MIB ·
.1.3.6.1.4.1.45.5.3.1.19
Object
This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode for non-EAP clients.
Context
- MIB
- BAY-STACK-EAPOL-EXTENSION-MIB
- OID
.1.3.6.1.4.1.45.5.3.1.19- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- bseeObjects
- Siblings
- 39
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bseeUserBasedPoliciesEnabled This object indicates whether EAPOL User-based policies
are enabled or disabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.1 |
| bseeMultiHostSingleAuthEnabled This object controls whether non-EAP clients (MAC addresses) may
be automatically authenticated on a port after an EAP client has
been authenticated (known as MHSA). This is the … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.10 |
| bseeUserBasedPoliciesFilterOnMac This object indicates whether the EAPOL User-based policy filters
that are installed on ports will be dynamically modified to include
the MAC address for which the filters are ins… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.11 |
| bseeMultiHostNonEapUserBasedPoliciesEnabled This object indicates whether non-EAPOL User-based policies
are enabled or disabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.12 |
| bseeMultiHostNonEapUserBasedPoliciesFilterOnMac This object indicates whether the non-EAPOL User-based policy filters
that are installed on ports will be dynamically modified to include
the MAC address for which the filters are… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.13 |
| bseeMultihostNonEapRadiusPasswordAttributeFormat This object controls the format of the RADIUS password attribute
that is included in requests to the RADIUS server for authenticating
non-EAP clients (MAC addresses).
I… | scalar | Bits | .1.3.6.1.4.1.45.5.3.1.14 |
| bseeMultiHostAllowNonEapPhones This object indicates whether IP phones will be allowed access
based on DHCP. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.15 |
| bseeMultiHostAllowRadiusAssignedVlan This object indicates whether to allow the use of RADIUS-assigned
VLANs in multihost-eap mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.16 |
| bseeMultiHostEapPacketMode This object indicates whether to use unicast or multicast packets
for Eap-ReqId packets. Normally, multicast packets are used. | scalar | Enumeration | .1.3.6.1.4.1.45.5.3.1.17 |
| bseeMultiHostEapRadiusTimeoutMode This object indicates whether or not to fail authentication of EAP
users on a RADIUS timeout. | scalar | Enumeration | .1.3.6.1.4.1.45.5.3.1.18 |
| bseeGuestVlanId This object specifies the ID of the global default guest VLAN. This
VLAN is used for ports which do not have a configured guest VLAN.
Access to the guest VLAN is allowed for MAC … | scalar | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.45.5.3.1.2 |
| bseeMultiHostEapProtocolEnabled This object controls whether processing of EAP protocol packets
is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.20 |
| bseeMultiHostUseMostRecentRadiusAssignedVlan Controls whether to use most recent RADIUS-assigned VLAN. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.21 |
| bseeMultiHostFailOpenVlanId This object specifies the ID of the global fail-over Vlan. | scalar | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.45.5.3.1.22 |
| bseeMultiHostFailOpenVlanEnabled This object specifies whether to use the fail-over Vlan. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.23 |
| bseeMultiHostMultiVlan This object specifies whether to use the multi-VLAN functionality
with MHMA mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.24 |
| bseeMultiHostNeapReauthenticationEnabled This object specifies whether to use 'NEAP re-authentication'
feature | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.25 |
| bseeMultiHostBlockDifferentVlanAuth This object specifies whether to block authentication of clients
which have an associated RADIUS assigned VLAN with an invalid value
or different from first client authenticated o… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.26 |
| bseeMultiHostAdacDummyRadiusRequests This object specifies whether to send or not dummy RADIUS requests
for NEAP users authenticated as ADAC NEAP | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.27 |
| bseeAllowPortMirroringOnEap This object specifies whether EAP enabled ports can be involved in
port mirroring | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.28 |
| bseeMultiHostAdacNonEapEnabled This object specifies whether the authentication of Non-EAP phones
using ADAC is allowed. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.29 |
| bseeRemediationVlanId This object specifies the ID of the remediation VLAN. If EAP
authentication fails for a port, MAC addresses on that port are
restricted to access only the remediation VLAN. Howe… | scalar | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.45.5.3.1.3 |
| bseeMultiHostFailOpenVlanContinuityModeEnabled This object specifies whether to use the fail-over Vlan continuity mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.30 |
| bseeMultiHostNonEapRadiusPasswordFreeformKey This command specifies a custom string to be put in the password used to
authenticate Non-EAP clients via RADIUS server. | scalar | OctetString | .1.3.6.1.4.1.45.5.3.1.31 |
| bseeMultiHostFailOpenVlanDisableEapMode This object specifies whether to use the Fail Open VLAN Disable EAP Mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.32 |
| bseePaeSystemOperState The oper state of EAP when ports are in Fail Open VLAN Disable EAP Mode. | scalar | Enumeration | .1.3.6.1.4.1.45.5.3.1.33 |
| bseeDefaultEapAll This object specifies whether to default all global EAP settings. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.34 |
| bseeAutoPortConfigModeSwitchToMHMV This object specifies the port list on which is applied the configuration. | scalar | RAPID-CITYLPortSet | .1.3.6.1.4.1.45.5.3.1.35 |
| bseeAutoPortConfigModeSwitchToMHMVAction This object specifies the action that is going to be made on the indicated port.
At retrieval, the value is always none(1). | scalar | Enumeration | .1.3.6.1.4.1.45.5.3.1.36 |
| bseeAutoPortConfigModeSwitchToMHMVStatus This object specifies the action result on the indicated port | scalar | Enumeration | .1.3.6.1.4.1.45.5.3.1.37 |
| bseeMultiHostRadiusNonEapDelay This object specifies the delay (in seconds) before sending Radius Access Request for Non-EAP MACs. | scalar | Integer32 | .1.3.6.1.4.1.45.5.3.1.38 |
| bseeEapDynamicUserBasedPoliciesState This object indicates whether the RADIUS dynamic EAPOL User-based policy filters will be enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.39 |
| bseeMaximumEapClientMacs This object specifies the global maximum number of EAP authenticated
MAC addresses allowed. | scalar | Integer32 | .1.3.6.1.4.1.45.5.3.1.4 |
| bseeNeapDynamicUserBasedPoliciesState This object indicates whether the RADIUS dynamic Non-EAPOL User-based policy filters will be enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.40 |
| bseeMaximumNonEapClientMacs This object specifies the global maximum number of non-EAP
authenticated MAC addresses allowed. | scalar | Integer32 | .1.3.6.1.4.1.45.5.3.1.5 |
| bseeGuestVlanEnabled This object specifies whether access to the global default guest
VLAN is allowed. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.6 |
| bseeRemediationVlanEnabled This object specifies whether access to the remediation VLAN
is allowed. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.7 |
| bseeMultiHostAllowNonEapClient This object controls whether non-EAP clients (MAC addresses) are
allowed. This is the system-wide setting. The associated per-port
setting (bseePortConfigMultiHostAllowNonEapCli… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.8 |
| bseeMultiHostRadiusAuthNonEapClient This object controls whether non-EAP clients (MAC addresses) may
be authenticated using RADIUS. This is the system-wide setting. The
associated per-port setting (bseePortConfigM… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.1.9 |