bseeGuestVlanId

BAY-STACK-EAPOL-EXTENSION-MIB · .1.3.6.1.4.1.45.5.3.1.2
MIB view Table view

Object

scalar r/w Q-BRIDGE-MIBVlanId 
This object specifies the ID of the global default guest VLAN.  This
VLAN is used for ports which do not have a configured guest VLAN.
Access to the guest VLAN is allowed for MAC addresses before EAP
authentication has been performed.  However, if the value of
bseeGuestVlanEnabled is false(2), then access to the guest VLAN
is not allowed for ports that do not have a configured guest VLAN.

Context

MIB
BAY-STACK-EAPOL-EXTENSION-MIB
OID
.1.3.6.1.4.1.45.5.3.1.2
Type
scalar
Access
readwrite
Status
current
Parent
bseeObjects
Siblings
39

Syntax

Q-BRIDGE-MIBVlanId
Source
Q-BRIDGE-MIBVlanId
Base type
Integer32

Values & Constraints

Type Constraints
range: 1..4094

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bseeUserBasedPoliciesEnabled
This object indicates whether EAPOL User-based policies are enabled or disabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.1
bseeMultiHostSingleAuthEnabled
This object controls whether non-EAP clients (MAC addresses) may be automatically authenticated on a port after an EAP client has been authenticated (known as MHSA). This is the …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.10
bseeUserBasedPoliciesFilterOnMac
This object indicates whether the EAPOL User-based policy filters that are installed on ports will be dynamically modified to include the MAC address for which the filters are ins…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.11
bseeMultiHostNonEapUserBasedPoliciesEnabled
This object indicates whether non-EAPOL User-based policies are enabled or disabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.12
bseeMultiHostNonEapUserBasedPoliciesFilterOnMac
This object indicates whether the non-EAPOL User-based policy filters that are installed on ports will be dynamically modified to include the MAC address for which the filters are…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.13
bseeMultihostNonEapRadiusPasswordAttributeFormat
This object controls the format of the RADIUS password attribute that is included in requests to the RADIUS server for authenticating non-EAP clients (MAC addresses). I…
scalarBits.1.3.6.1.4.1.45.5.3.1.14
bseeMultiHostAllowNonEapPhones
This object indicates whether IP phones will be allowed access based on DHCP.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.15
bseeMultiHostAllowRadiusAssignedVlan
This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.16
bseeMultiHostEapPacketMode
This object indicates whether to use unicast or multicast packets for Eap-ReqId packets. Normally, multicast packets are used.
scalarEnumeration.1.3.6.1.4.1.45.5.3.1.17
bseeMultiHostEapRadiusTimeoutMode
This object indicates whether or not to fail authentication of EAP users on a RADIUS timeout.
scalarEnumeration.1.3.6.1.4.1.45.5.3.1.18
bseeMultiHostAllowNonEapRadiusAssignedVlan
This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode for non-EAP clients.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.19
bseeMultiHostEapProtocolEnabled
This object controls whether processing of EAP protocol packets is enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.20
bseeMultiHostUseMostRecentRadiusAssignedVlan
Controls whether to use most recent RADIUS-assigned VLAN.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.21
bseeMultiHostFailOpenVlanId
This object specifies the ID of the global fail-over Vlan.
scalarQ-BRIDGE-MIBVlanId.1.3.6.1.4.1.45.5.3.1.22
bseeMultiHostFailOpenVlanEnabled
This object specifies whether to use the fail-over Vlan.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.23
bseeMultiHostMultiVlan
This object specifies whether to use the multi-VLAN functionality with MHMA mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.24
bseeMultiHostNeapReauthenticationEnabled
This object specifies whether to use 'NEAP re-authentication' feature
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.25
bseeMultiHostBlockDifferentVlanAuth
This object specifies whether to block authentication of clients which have an associated RADIUS assigned VLAN with an invalid value or different from first client authenticated o…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.26
bseeMultiHostAdacDummyRadiusRequests
This object specifies whether to send or not dummy RADIUS requests for NEAP users authenticated as ADAC NEAP
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.27
bseeAllowPortMirroringOnEap
This object specifies whether EAP enabled ports can be involved in port mirroring
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.28
bseeMultiHostAdacNonEapEnabled
This object specifies whether the authentication of Non-EAP phones using ADAC is allowed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.29
bseeRemediationVlanId
This object specifies the ID of the remediation VLAN. If EAP authentication fails for a port, MAC addresses on that port are restricted to access only the remediation VLAN. Howe…
scalarQ-BRIDGE-MIBVlanId.1.3.6.1.4.1.45.5.3.1.3
bseeMultiHostFailOpenVlanContinuityModeEnabled
This object specifies whether to use the fail-over Vlan continuity mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.30
bseeMultiHostNonEapRadiusPasswordFreeformKey
This command specifies a custom string to be put in the password used to authenticate Non-EAP clients via RADIUS server.
scalarOctetString.1.3.6.1.4.1.45.5.3.1.31
bseeMultiHostFailOpenVlanDisableEapMode
This object specifies whether to use the Fail Open VLAN Disable EAP Mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.32
bseePaeSystemOperState
The oper state of EAP when ports are in Fail Open VLAN Disable EAP Mode.
scalarEnumeration.1.3.6.1.4.1.45.5.3.1.33
bseeDefaultEapAll
This object specifies whether to default all global EAP settings.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.34
bseeAutoPortConfigModeSwitchToMHMV
This object specifies the port list on which is applied the configuration.
scalarRAPID-CITYLPortSet.1.3.6.1.4.1.45.5.3.1.35
bseeAutoPortConfigModeSwitchToMHMVAction
This object specifies the action that is going to be made on the indicated port. At retrieval, the value is always none(1).
scalarEnumeration.1.3.6.1.4.1.45.5.3.1.36
bseeAutoPortConfigModeSwitchToMHMVStatus
This object specifies the action result on the indicated port
scalarEnumeration.1.3.6.1.4.1.45.5.3.1.37
bseeMultiHostRadiusNonEapDelay
This object specifies the delay (in seconds) before sending Radius Access Request for Non-EAP MACs.
scalarInteger32.1.3.6.1.4.1.45.5.3.1.38
bseeEapDynamicUserBasedPoliciesState
This object indicates whether the RADIUS dynamic EAPOL User-based policy filters will be enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.39
bseeMaximumEapClientMacs
This object specifies the global maximum number of EAP authenticated MAC addresses allowed.
scalarInteger32.1.3.6.1.4.1.45.5.3.1.4
bseeNeapDynamicUserBasedPoliciesState
This object indicates whether the RADIUS dynamic Non-EAPOL User-based policy filters will be enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.40
bseeMaximumNonEapClientMacs
This object specifies the global maximum number of non-EAP authenticated MAC addresses allowed.
scalarInteger32.1.3.6.1.4.1.45.5.3.1.5
bseeGuestVlanEnabled
This object specifies whether access to the global default guest VLAN is allowed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.6
bseeRemediationVlanEnabled
This object specifies whether access to the remediation VLAN is allowed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.7
bseeMultiHostAllowNonEapClient
This object controls whether non-EAP clients (MAC addresses) are allowed. This is the system-wide setting. The associated per-port setting (bseePortConfigMultiHostAllowNonEapCli…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.8
bseeMultiHostRadiusAuthNonEapClient
This object controls whether non-EAP clients (MAC addresses) may be authenticated using RADIUS. This is the system-wide setting. The associated per-port setting (bseePortConfigM…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.1.9