aluExtDot1agCfmMepSingleLMMacAddress
ALU-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.1
Object
The value of aluExtDot1agCfmMepSingleLMMacAddress specifies the peer MAC address used
as a target for the Single-Ended Loss Measurement.
Setting this object will trigger a Single-ended Loss Measurement test to the specified
MAC address.
Upon completion of the test, the MacAddress will revert to it's default value,
indicating that another test is possible.
Context
- MIB
- ALU-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aluExtDot1agCfmMepEntry
- Table
- aluExtDot1agCfmMepTable
- Siblings
- 13
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aluExtDot1agCfmMepLbrOutWithTLV obsolete Total number of Loopback Replies transmitted with TLV. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.10 |
| aluExtDot1agCfmMepLbByMdaNum aluExtDot1agCfmMepLbByMdaNum indicates the MDA that handles the incoming LBM's with no TLV's.
aluExtDot1agCfmMepLbByMdaNum is set to 0 when there isn't any MDA's programmed to res… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.11 |
| aluExtDot1agCfmMepLmAlarmClearThreshold After aluDot1agCfmMepLmAlarm trap is sent, if aluExtDot1agCfmMepLmAlarmClearThreshold
is non-zero, and both aluDot1agCfmMepLmLossRatioLocal and aluDot1agCfmMepLmLossRatioPeer
are… | column | hundredth of a percent TLossRatioHundrethsOfPercent | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.12 |
| aluExtDot1agCfmMepLbrOutFastPath Number of Ethernet Loopback Replies transmitted by hardware in response to
valid Ethernet Loopback frames that either do not have any TLV's or have only
one data TLV. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.13 |
| aluExtDot1agCfmMepLbrOutSlowPath Total number of Ethernet Loopback Replies transmitted by software in response to
valid Ethernet Loopback frames that are not replied by harware. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.14 |
| aluExtDot1agCfmMepSingleLMPriority The value of aluExtDot1agCfmMepSingleLMPriority specifies the priority used in
the generated test frame for the Single-Ended Loss Measurement test. | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.2 |
| aluExtDot1agCfmMepSingleLMCount The value of aluExtDot1agCfmMepSingleLMCount specifies the number of frames with ETH-LM request
information to be sent to the peer MAC address for this Single-Ended Loss Measurem… | column | Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.3 |
| aluExtDot1agCfmMepSingleLMInterval The value of aluExtDot1agCfmMepSingleLMInterval specifies at what intervals
to transmit ETH-LM frames for the Single-Ended Loss Measurement test.
Currently Nokia 7705 SAR devices … | column | milliseconds Unsigned32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.4 |
| aluExtDot1agCfmMepDualLMEnable The value of aluExtDot1agCfmMepDualLMEnable specifies whether to enable or disable the
Dual-Ended Loss Measurement Test for the MEP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.5 |
| aluExtDot1agCfmMepDualLMAlarmThreshold aluExtDot1agCfmMepDualLMAlarmThreshold is the configuration of
an alarm threshold, in unit of hundredths of a percentage, for a trap
is raised when either a result of aluDot1agCfm… | column | hundredth of a percent TLossRatioHundrethsOfPercent | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.6 |
| aluExtDot1agCfmMepDmrRepliesSent Totoal number DMR sent to reply to valid DMM frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.7 |
| aluExtDot1agCfmMepLmrRepliesSent Totoal number LMR sent to reply to valid LMM frames received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.8 |
| aluExtDot1agCfmMepLbrOutNoTLV obsolete Total number of Loopback Replies transmitted without TLV. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.9 |