aluExtDot1agCfmMepLbrOutSlowPath

ALU-IEEE8021-CFM-MIB · .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.14
MIB view Table view

Object

column SNMPv2-SMICounter32 
Total number of Ethernet Loopback Replies transmitted by software in response to
valid Ethernet Loopback frames that are not replied by harware.

Context

MIB
ALU-IEEE8021-CFM-MIB
OID
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.14
Type
column
Access
readonly
Status
current
Parent
aluExtDot1agCfmMepEntry
Table
aluExtDot1agCfmMepTable
Siblings
13

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aluExtDot1agCfmMepSingleLMMacAddress
The value of aluExtDot1agCfmMepSingleLMMacAddress specifies the peer MAC address used as a target for the Single-Ended Loss Measurement. Setting this object will tr…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.1
aluExtDot1agCfmMepLbrOutWithTLV obsolete
Total number of Loopback Replies transmitted with TLV.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.10
aluExtDot1agCfmMepLbByMdaNum
aluExtDot1agCfmMepLbByMdaNum indicates the MDA that handles the incoming LBM's with no TLV's. aluExtDot1agCfmMepLbByMdaNum is set to 0 when there isn't any MDA's programmed to res…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.11
aluExtDot1agCfmMepLmAlarmClearThreshold
After aluDot1agCfmMepLmAlarm trap is sent, if aluExtDot1agCfmMepLmAlarmClearThreshold is non-zero, and both aluDot1agCfmMepLmLossRatioLocal and aluDot1agCfmMepLmLossRatioPeer are…
columnhundredth of a percent TLossRatioHundrethsOfPercent.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.12
aluExtDot1agCfmMepLbrOutFastPath
Number of Ethernet Loopback Replies transmitted by hardware in response to valid Ethernet Loopback frames that either do not have any TLV's or have only one data TLV.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.13
aluExtDot1agCfmMepSingleLMPriority
The value of aluExtDot1agCfmMepSingleLMPriority specifies the priority used in the generated test frame for the Single-Ended Loss Measurement test.
columnUnsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.2
aluExtDot1agCfmMepSingleLMCount
The value of aluExtDot1agCfmMepSingleLMCount specifies the number of frames with ETH-LM request information to be sent to the peer MAC address for this Single-Ended Loss Measurem…
columnUnsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.3
aluExtDot1agCfmMepSingleLMInterval
The value of aluExtDot1agCfmMepSingleLMInterval specifies at what intervals to transmit ETH-LM frames for the Single-Ended Loss Measurement test. Currently Nokia 7705 SAR devices …
columnmilliseconds Unsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.4
aluExtDot1agCfmMepDualLMEnable
The value of aluExtDot1agCfmMepDualLMEnable specifies whether to enable or disable the Dual-Ended Loss Measurement Test for the MEP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.5
aluExtDot1agCfmMepDualLMAlarmThreshold
aluExtDot1agCfmMepDualLMAlarmThreshold is the configuration of an alarm threshold, in unit of hundredths of a percentage, for a trap is raised when either a result of aluDot1agCfm…
columnhundredth of a percent TLossRatioHundrethsOfPercent.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.6
aluExtDot1agCfmMepDmrRepliesSent
Totoal number DMR sent to reply to valid DMM frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.7
aluExtDot1agCfmMepLmrRepliesSent
Totoal number LMR sent to reply to valid LMM frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.8
aluExtDot1agCfmMepLbrOutNoTLV obsolete
Total number of Loopback Replies transmitted without TLV.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.9