aluExtDot1agCfmMepLbrOutFastPath

ALU-IEEE8021-CFM-MIB · .1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.13
MIB view Table view

Object

column SNMPv2-SMICounter32 
Number of Ethernet Loopback Replies transmitted by hardware in response to
valid Ethernet Loopback frames that either do not have any TLV's or have only
one data TLV.

Context

MIB
ALU-IEEE8021-CFM-MIB
OID
.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.13
Type
column
Access
readonly
Status
current
Parent
aluExtDot1agCfmMepEntry
Table
aluExtDot1agCfmMepTable
Siblings
13

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aluExtDot1agCfmMepSingleLMMacAddress
The value of aluExtDot1agCfmMepSingleLMMacAddress specifies the peer MAC address used as a target for the Single-Ended Loss Measurement. Setting this object will tr…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.1
aluExtDot1agCfmMepLbrOutWithTLV obsolete
Total number of Loopback Replies transmitted with TLV.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.10
aluExtDot1agCfmMepLbByMdaNum
aluExtDot1agCfmMepLbByMdaNum indicates the MDA that handles the incoming LBM's with no TLV's. aluExtDot1agCfmMepLbByMdaNum is set to 0 when there isn't any MDA's programmed to res…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.11
aluExtDot1agCfmMepLmAlarmClearThreshold
After aluDot1agCfmMepLmAlarm trap is sent, if aluExtDot1agCfmMepLmAlarmClearThreshold is non-zero, and both aluDot1agCfmMepLmLossRatioLocal and aluDot1agCfmMepLmLossRatioPeer are…
columnhundredth of a percent TLossRatioHundrethsOfPercent.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.12
aluExtDot1agCfmMepLbrOutSlowPath
Total number of Ethernet Loopback Replies transmitted by software in response to valid Ethernet Loopback frames that are not replied by harware.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.14
aluExtDot1agCfmMepSingleLMPriority
The value of aluExtDot1agCfmMepSingleLMPriority specifies the priority used in the generated test frame for the Single-Ended Loss Measurement test.
columnUnsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.2
aluExtDot1agCfmMepSingleLMCount
The value of aluExtDot1agCfmMepSingleLMCount specifies the number of frames with ETH-LM request information to be sent to the peer MAC address for this Single-Ended Loss Measurem…
columnUnsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.3
aluExtDot1agCfmMepSingleLMInterval
The value of aluExtDot1agCfmMepSingleLMInterval specifies at what intervals to transmit ETH-LM frames for the Single-Ended Loss Measurement test. Currently Nokia 7705 SAR devices …
columnmilliseconds Unsigned32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.4
aluExtDot1agCfmMepDualLMEnable
The value of aluExtDot1agCfmMepDualLMEnable specifies whether to enable or disable the Dual-Ended Loss Measurement Test for the MEP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.5
aluExtDot1agCfmMepDualLMAlarmThreshold
aluExtDot1agCfmMepDualLMAlarmThreshold is the configuration of an alarm threshold, in unit of hundredths of a percentage, for a trap is raised when either a result of aluDot1agCfm…
columnhundredth of a percent TLossRatioHundrethsOfPercent.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.6
aluExtDot1agCfmMepDmrRepliesSent
Totoal number DMR sent to reply to valid DMM frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.7
aluExtDot1agCfmMepLmrRepliesSent
Totoal number LMR sent to reply to valid LMM frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.8
aluExtDot1agCfmMepLbrOutNoTLV obsolete
Total number of Loopback Replies transmitted without TLV.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6527.6.1.2.2.10.1.1.1.9