radioEquipPeripheralLom

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.15.5
MIB view Table view

Object

scalar r/w Enumeration 
Peripheral LOM Enable. It is used to enable the IP packet forwarding
towards selected Radio microcontrollers. It is structured as bitmap:
 - bit 0 = disable
 - bit 1 = radio 1A
 - bit 2 = radio 2A
 - bit 3 = radio 1B
 - bit 4 = radio 2B.

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.15.5
Type
scalar
Access
readwrite
Status
current
Parent
radioEquip
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disable
2enableRadio1A
4enableRadio2A
6enableRadioA
8enableRadio1B
16enableRadio2B
24enableRadioB
30enableRadioAll

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radioEquipRadioAMode
The object is used to set the operative mode of the radio connected: - single link - two links protected.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.1
radioEquipProtectMismatchAlarmSeverityCode
Define the severity associated to the radioEquipProtectMismatchAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.10
radioEquipBerSyncLossAlarmSeverityCode
Define the severity associated to the radioEquipBerSyncLossAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.11
radioEquipCompressionFragmentationMismatchAlarm
Compression mismatch alarm status and severity. It is set when the configuration of compression is different on the link.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.12
radioEquipCompressionFragmentationMismatchAlarmSeverityCode
Define the severity associated to the radioEquipCompressionFragmentationMismatchAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.13
radioEquipChanSpacingEtsiFcc
It defines the Canalization Tipology (USA or otherwise).
scalarEnumeration.1.3.6.1.4.1.3373.25.15.14
radioEquipIEEE1588PtpConfigMismatchAlarm
IEEE 1588 configuration mismatch alarm. It is active if both local and remote terminal are configured as Master or Slave PPS reference
scalarEnumeration.1.3.6.1.4.1.3373.25.15.15
radioEquipIEEE1588PtpConfigMismatchAlarmSeverityCode
Define the severity associated to the IEEE1588PtpConfigMismatchAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.16
radioEquipIEEE1588PtpPpsUnlockAlarm
IEEE 1588 PPS unlock alarm
scalarEnumeration.1.3.6.1.4.1.3373.25.15.17
radioEquipIEEE1588PtpPpsUnlockAlarmSeverityCode
Define the severity associated to the IEEE1588PtpPpsUnlockAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.18
radioEquipScanningStatusTrapNotification
Enables/disables the trap generation on download status change.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.19
radioEquipTable
Table with radioEquip records.
table-.1.3.6.1.4.1.3373.25.15.2
radioEquipAcmTable
Table with radioEquip records.
table-.1.3.6.1.4.1.3373.25.15.3
radioEquipFadeMarginMeasure
Set by manager before/end to start/stop fade margin measure.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.4
radioEquipLinkTelemetryFailAlarmSeverityCode
Define the severity associated to the LinkTelemetryFailAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.6
radioEquipLinkIdAlarmSeverityCode
Define the severity associated to theLink Id Fail Alarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.7
radioEquipReducedCapacityAlarmSeverityCode
Define the severity associated to the radioEquipReducedCapacityAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.8
radioEquipProtectNotRespondingAlarmSeverityCode
Define the severity associated to the radioEquipProtectNotRespondingAlarm and enable/disable the trap generation on status change event.
scalarEnumeration.1.3.6.1.4.1.3373.25.15.9