radioEquipLinkIdAlarmSeverityCode
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.15.7
Object
scalar
r/w
Enumeration
Define the severity associated to theLink Id Fail Alarm and enable/disable the trap generation on status change event.
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.15.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- radioEquip
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | status-trapEnable |
3 | warning-trapEnable |
4 | minor-trapEnable |
5 | major-trapEnable |
6 | critical-trapEnable |
18 | status-trapDisable |
19 | warning-trapDisable |
20 | minor-trapDisable |
21 | major-trapDisable |
22 | critical-trapDisable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radioEquipRadioAMode The object is used to set the operative mode of the radio connected:
- single link
- two links protected. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.1 |
| radioEquipProtectMismatchAlarmSeverityCode Define the severity associated to the radioEquipProtectMismatchAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.10 |
| radioEquipBerSyncLossAlarmSeverityCode Define the severity associated to the radioEquipBerSyncLossAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.11 |
| radioEquipCompressionFragmentationMismatchAlarm Compression mismatch alarm status and severity.
It is set when the configuration of compression is different
on the link. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.12 |
| radioEquipCompressionFragmentationMismatchAlarmSeverityCode Define the severity associated to the radioEquipCompressionFragmentationMismatchAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.13 |
| radioEquipChanSpacingEtsiFcc It defines the Canalization Tipology (USA or otherwise). | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.14 |
| radioEquipIEEE1588PtpConfigMismatchAlarm IEEE 1588 configuration mismatch alarm.
It is active if both local and remote terminal are configured
as Master or Slave PPS reference | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.15 |
| radioEquipIEEE1588PtpConfigMismatchAlarmSeverityCode Define the severity associated to the IEEE1588PtpConfigMismatchAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.16 |
| radioEquipIEEE1588PtpPpsUnlockAlarm IEEE 1588 PPS unlock alarm | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.17 |
| radioEquipIEEE1588PtpPpsUnlockAlarmSeverityCode Define the severity associated to the IEEE1588PtpPpsUnlockAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.18 |
| radioEquipScanningStatusTrapNotification Enables/disables the trap generation on download status change. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.19 |
| radioEquipTable Table with radioEquip records. | table | - | .1.3.6.1.4.1.3373.25.15.2 |
| radioEquipAcmTable Table with radioEquip records. | table | - | .1.3.6.1.4.1.3373.25.15.3 |
| radioEquipFadeMarginMeasure Set by manager before/end to start/stop fade margin measure. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.4 |
| radioEquipPeripheralLom Peripheral LOM Enable. It is used to enable the IP packet forwarding
towards selected Radio microcontrollers. It is structured as bitmap:
- bit 0 = disable
- bit 1 = radio 1A
-… | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.5 |
| radioEquipLinkTelemetryFailAlarmSeverityCode Define the severity associated to the LinkTelemetryFailAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.6 |
| radioEquipReducedCapacityAlarmSeverityCode Define the severity associated to the radioEquipReducedCapacityAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.8 |
| radioEquipProtectNotRespondingAlarmSeverityCode Define the severity associated to the radioEquipProtectNotRespondingAlarm
and enable/disable the trap generation on status change event. | scalar | Enumeration | .1.3.6.1.4.1.3373.25.15.9 |