radioEquipCompressionFragmentationMismatchAlarm

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.15.12

MIB view Table view

Object

scalar Enumeration

Compression mismatch alarm status and severity.
It is set when the configuration of compression is different
on the link.

Context

MIB: ALFOPLUS-SIAE-MIB
OID: .1.3.6.1.4.1.3373.25.15.12
Type: scalar
Access: readonly
Status: current
Parent: radioEquip
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	cleared
`2`	activeReportable-Status
`3`	activeReportable-Warning
`4`	activeReportable-Minor
`5`	activeReportable-Major
`6`	activeReportable-Critical

Related Objects

Sibling Objects

Object	Type	Syntax	OID
radioEquipRadioAMode The object is used to set the operative mode of the radio connected: - single link - two links protected.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.1`
radioEquipProtectMismatchAlarmSeverityCode Define the severity associated to the radioEquipProtectMismatchAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.10`
radioEquipBerSyncLossAlarmSeverityCode Define the severity associated to the radioEquipBerSyncLossAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.11`
radioEquipCompressionFragmentationMismatchAlarmSeverityCode Define the severity associated to the radioEquipCompressionFragmentationMismatchAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.13`
radioEquipChanSpacingEtsiFcc It defines the Canalization Tipology (USA or otherwise).	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.14`
radioEquipIEEE1588PtpConfigMismatchAlarm IEEE 1588 configuration mismatch alarm. It is active if both local and remote terminal are configured as Master or Slave PPS reference	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.15`
radioEquipIEEE1588PtpConfigMismatchAlarmSeverityCode Define the severity associated to the IEEE1588PtpConfigMismatchAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.16`
radioEquipIEEE1588PtpPpsUnlockAlarm IEEE 1588 PPS unlock alarm	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.17`
radioEquipIEEE1588PtpPpsUnlockAlarmSeverityCode Define the severity associated to the IEEE1588PtpPpsUnlockAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.18`
radioEquipScanningStatusTrapNotification Enables/disables the trap generation on download status change.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.19`
radioEquipTable Table with radioEquip records.	table	-	`.1.3.6.1.4.1.3373.25.15.2`
radioEquipAcmTable Table with radioEquip records.	table	-	`.1.3.6.1.4.1.3373.25.15.3`
radioEquipFadeMarginMeasure Set by manager before/end to start/stop fade margin measure.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.4`
radioEquipPeripheralLom Peripheral LOM Enable. It is used to enable the IP packet forwarding towards selected Radio microcontrollers. It is structured as bitmap: - bit 0 = disable - bit 1 = radio 1A -…	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.5`
radioEquipLinkTelemetryFailAlarmSeverityCode Define the severity associated to the LinkTelemetryFailAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.6`
radioEquipLinkIdAlarmSeverityCode Define the severity associated to theLink Id Fail Alarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.7`
radioEquipReducedCapacityAlarmSeverityCode Define the severity associated to the radioEquipReducedCapacityAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.8`
radioEquipProtectNotRespondingAlarmSeverityCode Define the severity associated to the radioEquipProtectNotRespondingAlarm and enable/disable the trap generation on status change event.	scalar	Enumeration	`.1.3.6.1.4.1.3373.25.15.9`