radioEquipBandwidthAndModulation

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.15.2.1.3
MIB view Table view

Object

column r/w Enumeration 
Link Modulation and Bandwidth (channel spacing).
The value of this object value is computed by:
   16*bandwidth+modulation
 where bandwidth is:
   1 = 7MHz
   2 = 14MHz
   3 = 28MHz
   4 = 56MHz
 and modulation is:
   0 = 4QAM
   1 = 8PSK    (not implemented, reserved)
   2 = 16QAM
   3 = 32QAM
   4 = 64QAM
   5 = 128QAM
   6 = 256QAM
   7 = 512QAM
   8 = 1024QAM
   9 = 2048QAM

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.15.2.1.3
Type
column
Access
readwrite
Status
current
Parent
radioEquipRecord
Table
radioEquipTable
Siblings
46

Syntax

Enumeration

Values & Constraints

Enumerated Values
16bw7MHz-4QAM
18bw7MHz-16QAM
19bw7MHz-32QAM
20bw7MHz-64QAM
21bw7MHz-128QAM
22bw7MHz-256QAM
23bw7MHz-512QAM
24bw7MHz-1024QAM
32bw14MHz-4QAM
34bw14MHz-16QAM
35bw14MHz-32QAM
36bw14MHz-64QAM
37bw14MHz-128QAM
38bw14MHz-256QAM
39bw14MHz-512QAM
40bw14MHz-1024QAM
48bw28MHz-4QAM
50bw28MHz-16QAM
51bw28MHz-32QAM
52bw28MHz-64QAM
53bw28MHz-128QAM
54bw28MHz-256QAM
55bw28MHz-512QAM
56bw28MHz-1024QAM
64bw56MHz-4QAM
66bw56MHz-16QAM
67bw56MHz-32QAM
68bw56MHz-64QAM
69bw56MHz-128QAM
70bw56MHz-256QAM
71bw56MHz-512QAM
72bw56MHz-1024QAM
80bw10MHz-4QAM
82bw10MHz-16QAM
83bw10MHz-32QAM
84bw10MHz-64QAM
85bw10MHz-128QAM
86bw10MHz-256QAM
87bw10MHz-512QAM
88bw10MHz-1024QAM
96bw20MHz-4QAM
98bw20MHz-16QAM
99bw20MHz-32QAM
100bw20MHz-64QAM
101bw20MHz-128QAM
102bw20MHz-256QAM
103bw20MHz-512QAM
104bw20MHz-1024QAM
112bw30MHz-4QAM
114bw30MHz-16QAM
115bw30MHz-32QAM
116bw30MHz-64QAM
117bw30MHz-128QAM
118bw30MHz-256QAM
119bw30MHz-512QAM
120bw30MHz-1024QAM
128bw40MHz-4QAM
130bw40MHz-16QAM
131bw40MHz-32QAM
132bw40MHz-64QAM
133bw40MHz-128QAM
134bw40MHz-256QAM
135bw40MHz-512QAM
136bw40MHz-1024QAM
144bw50MHz-4QAM
146bw50MHz-16QAM
147bw50MHz-32QAM
148bw50MHz-64QAM
149bw50MHz-128QAM
150bw50MHz-256QAM
151bw50MHz-512QAM
152bw50MHz-1024QAM

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radioEquipId
It identify the radio in 1+0 or 1+1 configuration.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.1
radioEquipTxPwrThresh
Threshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set.
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.10
radioEquipRxPwrThresh
Threshold (value -40, -99 dBm) for RX power below wich the related alarm is set.
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.11
radioEquipQualityLowRxSw
Enable radioBranchRxQualityLowAlarm as switching criterion (only if 1+1 configuration)
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.13
radioEquipToProtectStatus
Radio branch status towards protection ALFO.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.14
radioEquipToProtectForcedStatus
Radio branch forced status towards protection ALFO.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.15
radioEquipFromProtectStatus
Protection ALFO radio branch acquired status.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.16
radioEquipProtectRealign
Protection unit re-provisioning command start. Value automatically cleared after realign.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.17
radioEquipProtectNotRespondingAlarm
Protection unit unreachable alarm status and severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.18
radioEquipProtectMismatchAlarm
Protection unit not provisioned alarm status and severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.19
radioEquipLabel
ASCII string used to assign a name to the radio side.
columnOctetString.1.3.6.1.4.1.3373.25.15.2.1.2
radioEquipLinkTelemetryFailAlarm
Fail of link telemetry communication channel with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.20
radioEquipLinkIdAlarm
Link Identification Alarm with associated Severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.21
radioEquipReducedCapacityAlarm
The equipment works in reduced capacity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.22
radioEquipAcmRxProfileInUse
This object reports the ACM profile number in use in the radio Rx.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.23
radioEquipAcmTxProfileInUse
This object reports the ACM profile number in use in the radio Tx.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.24
radioEquipCurrentTxETHCapacity
This object reports the transmitted payload capacity used by the Ethernet.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.25
radioEquipLowerModulation
The object is used to limit the TX modulation at the value set.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.26
radioEquipCurrentRxETHCapacity
This object reports the received payload capacity used by the Ethernet.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.27
radioEquipForceLocalTxProfile
This object forces the specified Tx profile on the local terminal. This is a manual operation.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.28
radioEquipForceRemoteTxProfile
This object forces the specified Tx profile on the remote terminal. This is a manual operation.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.29
radioEquipTxPowerMode
This object contains the mode of transmission of RF power used on changes of modulations.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.30
radioEquipDownshiftOffsetAcm
The object sets the offset respect the downshift threshold for ACM profiles in dB/10.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.31
radioEquipUpshiftOffsetAcm
The object shows the offset respect the upshift threshold for ACM profiles in dB/10.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.32
radioEquipSyncEnable
It enable the synchronization feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.33
radioEquipBerStart
Stop, Start (resetting errors and counters) the pattern. This item is linked to a manual operation (ManOpRecord) instance.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.34
radioEquipBerErrorCounterH
64Bit error counter. Bit 32-63.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.35
radioEquipBerErrorCounterL
64Bit error counter. Bit 0-31.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.36
radioEquipBerDataCounterH
64Bit data counter. Bit 32-63.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.37
radioEquipBerDataCounterL
64Bit data counter. Bit 0-31.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.38
radioEquipBerSyncLossAlarm
BER sync loss alarm.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.39
radioEquipUpperModulation
The object is used to limit the TX modulation at the value set.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.4
radioEquipBerSyncLossAlarmCounter
BER sync loss events counter.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.40
radioEquipBerElapsedTime
BER measure elapsed time.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.41
radioEquipRSSIEnable
It enable the RSSI feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.42
radioEquipRescueConnectionEnable
It enable the rescue connection feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.43
radioEquipScanningStartCmd
It enable the scanning start feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.44
radioEquipScanningFreqMin
It define the scanning min frequency (KHz)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.45
radioEquipScanningFreqMax
It define the scanning max frequency (KHz)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.46
radioEquipScanningFreqStep
It define the scanning step frequency (KHz)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.47
radioEquipScanningFreqTime
It define the scanning time frequency (sec)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.48
radioEquipScanningPercentageProgress
It define the percentage of the scanning measurement
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.49
radioEquipAcmEngineMode
This object is used to set the ACM engine.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.5
radioEquipScanningStatus
Status of SW download operation.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.50
radioEquipAcmConstantPeakModeEnable
This object is used to enable/disable the constant peak power in the transmitter rf. This mode is used if lowest modulation is selected as reference.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.6
radioEquipLinkId
Link Identification (value 0..255).
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.9