radioEquipAcmTxProfileInUse

ALFOPLUS-SIAE-MIB · .1.3.6.1.4.1.3373.25.15.2.1.24
MIB view Table view

Object

column Enumeration 
This object reports the ACM profile number in use in the radio Tx.

Context

MIB
ALFOPLUS-SIAE-MIB
OID
.1.3.6.1.4.1.3373.25.15.2.1.24
Type
column
Access
readonly
Status
current
Parent
radioEquipRecord
Table
radioEquipTable
Siblings
46

Syntax

Enumeration

Values & Constraints

Enumerated Values
0acm-profile-unknown
1acm-prof-4QAM-code3
2acm-prof-4QAM-code2
3acm-prof-4QAM-code1
4acm-prof-4QAM-code0
5acm-prof-16QAM-code3
6acm-prof-16QAM-code2
7acm-prof-16QAM-code1
8acm-prof-16QAM-code0
9acm-prof-32QAM-code3
10acm-prof-32QAM-code2
11acm-prof-32QAM-code1
12acm-prof-32QAM-code0
13acm-prof-64QAM-code2
14acm-prof-64QAM-code1
15acm-prof-64QAM-code0
16acm-prof-128QAM-code2
17acm-prof-128QAM-code1
18acm-prof-128QAM-code0
19acm-prof-256QAM-code2
20acm-prof-256QAM-code1
21acm-prof-256QAM-code0
22acm-prof-512QAM-code2
23acm-prof-512QAM-code1
24acm-prof-512QAM-code0
25acm-prof-1024QAM-code2
26acm-prof-1024QAM-code1
27acm-prof-1024QAM-code0
28acm-prof-2048QAM-code2
29acm-prof-2048QAM-code1
30acm-prof-2048QAM-code0
31acm-prof-reserved-code3
32acm-prof-reserved-code2
33acm-prof-reserved-code1
34acm-prof-reserved-code0

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radioEquipId
It identify the radio in 1+0 or 1+1 configuration.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.1
radioEquipTxPwrThresh
Threshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set.
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.10
radioEquipRxPwrThresh
Threshold (value -40, -99 dBm) for RX power below wich the related alarm is set.
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.11
radioEquipQualityLowRxSw
Enable radioBranchRxQualityLowAlarm as switching criterion (only if 1+1 configuration)
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.13
radioEquipToProtectStatus
Radio branch status towards protection ALFO.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.14
radioEquipToProtectForcedStatus
Radio branch forced status towards protection ALFO.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.15
radioEquipFromProtectStatus
Protection ALFO radio branch acquired status.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.16
radioEquipProtectRealign
Protection unit re-provisioning command start. Value automatically cleared after realign.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.17
radioEquipProtectNotRespondingAlarm
Protection unit unreachable alarm status and severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.18
radioEquipProtectMismatchAlarm
Protection unit not provisioned alarm status and severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.19
radioEquipLabel
ASCII string used to assign a name to the radio side.
columnOctetString.1.3.6.1.4.1.3373.25.15.2.1.2
radioEquipLinkTelemetryFailAlarm
Fail of link telemetry communication channel with associated severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.20
radioEquipLinkIdAlarm
Link Identification Alarm with associated Severity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.21
radioEquipReducedCapacityAlarm
The equipment works in reduced capacity.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.22
radioEquipAcmRxProfileInUse
This object reports the ACM profile number in use in the radio Rx.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.23
radioEquipCurrentTxETHCapacity
This object reports the transmitted payload capacity used by the Ethernet.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.25
radioEquipLowerModulation
The object is used to limit the TX modulation at the value set.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.26
radioEquipCurrentRxETHCapacity
This object reports the received payload capacity used by the Ethernet.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.27
radioEquipForceLocalTxProfile
This object forces the specified Tx profile on the local terminal. This is a manual operation.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.28
radioEquipForceRemoteTxProfile
This object forces the specified Tx profile on the remote terminal. This is a manual operation.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.29
radioEquipBandwidthAndModulation
Link Modulation and Bandwidth (channel spacing). The value of this object value is computed by: 16*bandwidth+modulation where bandwidth is: 1 = 7MHz 2 = 14MHz 3 = 28M…
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.3
radioEquipTxPowerMode
This object contains the mode of transmission of RF power used on changes of modulations.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.30
radioEquipDownshiftOffsetAcm
The object sets the offset respect the downshift threshold for ACM profiles in dB/10.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.31
radioEquipUpshiftOffsetAcm
The object shows the offset respect the upshift threshold for ACM profiles in dB/10.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.32
radioEquipSyncEnable
It enable the synchronization feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.33
radioEquipBerStart
Stop, Start (resetting errors and counters) the pattern. This item is linked to a manual operation (ManOpRecord) instance.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.34
radioEquipBerErrorCounterH
64Bit error counter. Bit 32-63.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.35
radioEquipBerErrorCounterL
64Bit error counter. Bit 0-31.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.36
radioEquipBerDataCounterH
64Bit data counter. Bit 32-63.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.37
radioEquipBerDataCounterL
64Bit data counter. Bit 0-31.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.3373.25.15.2.1.38
radioEquipBerSyncLossAlarm
BER sync loss alarm.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.39
radioEquipUpperModulation
The object is used to limit the TX modulation at the value set.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.4
radioEquipBerSyncLossAlarmCounter
BER sync loss events counter.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.40
radioEquipBerElapsedTime
BER measure elapsed time.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.41
radioEquipRSSIEnable
It enable the RSSI feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.42
radioEquipRescueConnectionEnable
It enable the rescue connection feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.43
radioEquipScanningStartCmd
It enable the scanning start feature
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.44
radioEquipScanningFreqMin
It define the scanning min frequency (KHz)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.45
radioEquipScanningFreqMax
It define the scanning max frequency (KHz)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.46
radioEquipScanningFreqStep
It define the scanning step frequency (KHz)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.47
radioEquipScanningFreqTime
It define the scanning time frequency (sec)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.25.15.2.1.48
radioEquipScanningPercentageProgress
It define the percentage of the scanning measurement
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.49
radioEquipAcmEngineMode
This object is used to set the ACM engine.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.5
radioEquipScanningStatus
Status of SW download operation.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.50
radioEquipAcmConstantPeakModeEnable
This object is used to enable/disable the constant peak power in the transmitter rf. This mode is used if lowest modulation is selected as reference.
columnEnumeration.1.3.6.1.4.1.3373.25.15.2.1.6
radioEquipLinkId
Link Identification (value 0..255).
columnInteger32.1.3.6.1.4.1.3373.25.15.2.1.9