adsl2LConfProfModeSpecRowStatus
ADSL2-LINE-MIB ·
.1.3.6.1.2.1.10.238.1.5.1.3.1.10
Object
This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'),
it must first be unreferenced from all associated
templates.
Context
- MIB
- ADSL2-LINE-MIB
- OID
.1.3.6.1.2.1.10.238.1.5.1.3.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adsl2LineConfProfModeSpecEntry
- Table
- adsl2LineConfProfModeSpecTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adsl2LConfProfAdslMode The ADSL Mode is a way of categorizing the various ADSL
transmission modes into groups; each group (ADSL Mode) shares
the same PSD configuration.
There should be multiple entries … | column | ADSL2-LINE-TC-MIBAdsl2OperationModes | .1.3.6.1.2.1.10.238.1.5.1.3.1.1 |
| adsl2LConfProfMaxNomPsdDs The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz (physical values are -60 to
-30 d… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.2 |
| adsl2LConfProfMaxNomPsdUs The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz (physical values are -60 to
-30 dBm… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.3 |
| adsl2LConfProfMaxNomAtpDs The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25… | column | 0.1 dBm Unsigned32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.4 |
| adsl2LConfProfMaxNomAtpUs The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5… | column | 0.1 dBm Unsigned32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.5 |
| adsl2LConfProfMaxAggRxPwrUs The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The ATU-C should verify that the
upstream power cutback is such that this maximum aggregate
re… | column | 0.1 dBm Integer32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.6 |
| adsl2LConfProfPsdMaskDs The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5, and it may impose PSD
restrictions (breakpoints) in addition to the Limit … | column | ADSL2-LINE-TC-MIBAdsl2PsdMaskDs | .1.3.6.1.2.1.10.238.1.5.1.3.1.7 |
| adsl2LConfProfPsdMaskUs The upstream PSD mask applicable at the U-R2 reference
point.
This parameter is used only for G.992.5, and it may impose PSD
restrictions (breakpoints) in addition to the Limit PS… | column | ADSL2-LINE-TC-MIBAdsl2PsdMaskUs | .1.3.6.1.2.1.10.238.1.5.1.3.1.8 |
| adsl2LConfProfPsdMaskSelectUs The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
adsl2LConf… | column | Unsigned32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.9 |