adsl2LConfProfAdslMode

ADSL2-LINE-MIB · .1.3.6.1.2.1.10.238.1.5.1.3.1.1
MIB view Table view

Object

column ADSL2-LINE-TC-MIBAdsl2OperationModes 
The ADSL Mode is a way of categorizing the various ADSL
transmission modes into groups; each group (ADSL Mode) shares
the same PSD configuration.
There should be multiple entries in this table for a given
line profile in case multiple bits are set in
adsl2LConfProfAtuTransSysEna for that profile.

Context

MIB
ADSL2-LINE-MIB
OID
.1.3.6.1.2.1.10.238.1.5.1.3.1.1
Type
column
Access
noaccess
Status
current
Parent
adsl2LineConfProfModeSpecEntry
Table
adsl2LineConfProfModeSpecTable
Siblings
9

Syntax

ADSL2-LINE-TC-MIBAdsl2OperationModes
Source
ADSL2-LINE-TC-MIBAdsl2OperationModes
Base type
Enumeration

Values & Constraints

Type Values
1defMode
2adsl
8g9923PotsNonOverlapped
9g9923PotsOverlapped
10g9923IsdnNonOverlapped
11g9923isdnOverlapped
14g9924potsNonOverlapped
15g9924potsOverlapped
18g9923AnnexIAllDigNonOverlapped
19g9923AnnexIAllDigOverlapped
20g9923AnnexJAllDigNonOverlapped
21g9923AnnexJAllDigOverlapped
22g9924AnnexIAllDigNonOverlapped
23g9924AnnexIAllDigOverlapped
24g9923AnnexLMode1NonOverlapped
25g9923AnnexLMode2NonOverlapped
26g9923AnnexLMode3Overlapped
27g9923AnnexLMode4Overlapped
28g9923AnnexMPotsNonOverlapped
29g9923AnnexMPotsOverlapped
30g9925PotsNonOverlapped
31g9925PotsOverlapped
32g9925IsdnNonOverlapped
33g9925isdnOverlapped
36g9925AnnexIAllDigNonOverlapped
37g9925AnnexIAllDigOverlapped
38g9925AnnexJAllDigNonOverlapped
39g9925AnnexJAllDigOverlapped
40g9925AnnexMPotsNonOverlapped
41g9925AnnexMPotsOverlapped

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adsl2LConfProfModeSpecRowStatus
This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'activ…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.238.1.5.1.3.1.10
adsl2LConfProfMaxNomPsdDs
The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 d…
column0.1 dBm/Hz Integer32.1.3.6.1.2.1.10.238.1.5.1.3.1.2
adsl2LConfProfMaxNomPsdUs
The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm…
column0.1 dBm/Hz Integer32.1.3.6.1.2.1.10.238.1.5.1.3.1.3
adsl2LConfProfMaxNomAtpDs
The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25…
column0.1 dBm Unsigned32.1.3.6.1.2.1.10.238.1.5.1.3.1.4
adsl2LConfProfMaxNomAtpUs
The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5…
column0.1 dBm Unsigned32.1.3.6.1.2.1.10.238.1.5.1.3.1.5
adsl2LConfProfMaxAggRxPwrUs
The maximum upstream aggregate receive power over the relevant set of sub-carriers. The ATU-C should verify that the upstream power cutback is such that this maximum aggregate re…
column0.1 dBm Integer32.1.3.6.1.2.1.10.238.1.5.1.3.1.6
adsl2LConfProfPsdMaskDs
The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5, and it may impose PSD restrictions (breakpoints) in addition to the Limit …
columnADSL2-LINE-TC-MIBAdsl2PsdMaskDs.1.3.6.1.2.1.10.238.1.5.1.3.1.7
adsl2LConfProfPsdMaskUs
The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5, and it may impose PSD restrictions (breakpoints) in addition to the Limit PS…
columnADSL2-LINE-TC-MIBAdsl2PsdMaskUs.1.3.6.1.2.1.10.238.1.5.1.3.1.8
adsl2LConfProfPsdMaskSelectUs
The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in adsl2LConf…
columnUnsigned32.1.3.6.1.2.1.10.238.1.5.1.3.1.9