adsl2LConfProfMaxNomPsdUs
ADSL2-LINE-MIB ·
.1.3.6.1.2.1.10.238.1.5.1.3.1.3
Object
column
r/w
0.1 dBm/Hz Integer32
The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm/Hz).
Context
- MIB
- ADSL2-LINE-MIB
- OID
.1.3.6.1.2.1.10.238.1.5.1.3.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 dBm/Hz
- Parent
- adsl2LineConfProfModeSpecEntry
- Table
- adsl2LineConfProfModeSpecTable
- Siblings
- 9
Syntax
0.1 dBm/Hz Integer32
Values & Constraints
Object Constraints
range: -600--300
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adsl2LConfProfAdslMode The ADSL Mode is a way of categorizing the various ADSL
transmission modes into groups; each group (ADSL Mode) shares
the same PSD configuration.
There should be multiple entries … | column | ADSL2-LINE-TC-MIBAdsl2OperationModes | .1.3.6.1.2.1.10.238.1.5.1.3.1.1 |
| adsl2LConfProfModeSpecRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.238.1.5.1.3.1.10 |
| adsl2LConfProfMaxNomPsdDs The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz (physical values are -60 to
-30 d… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.2 |
| adsl2LConfProfMaxNomAtpDs The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25… | column | 0.1 dBm Unsigned32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.4 |
| adsl2LConfProfMaxNomAtpUs The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5… | column | 0.1 dBm Unsigned32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.5 |
| adsl2LConfProfMaxAggRxPwrUs The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The ATU-C should verify that the
upstream power cutback is such that this maximum aggregate
re… | column | 0.1 dBm Integer32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.6 |
| adsl2LConfProfPsdMaskDs The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5, and it may impose PSD
restrictions (breakpoints) in addition to the Limit … | column | ADSL2-LINE-TC-MIBAdsl2PsdMaskDs | .1.3.6.1.2.1.10.238.1.5.1.3.1.7 |
| adsl2LConfProfPsdMaskUs The upstream PSD mask applicable at the U-R2 reference
point.
This parameter is used only for G.992.5, and it may impose PSD
restrictions (breakpoints) in addition to the Limit PS… | column | ADSL2-LINE-TC-MIBAdsl2PsdMaskUs | .1.3.6.1.2.1.10.238.1.5.1.3.1.8 |
| adsl2LConfProfPsdMaskSelectUs The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
adsl2LConf… | column | Unsigned32 | .1.3.6.1.2.1.10.238.1.5.1.3.1.9 |