acsPowerMgmtUPSTableInputBrownOutCount

ACS8000-MIB · .1.3.6.1.4.1.10418.26.2.5.12.1.11
MIB view Table view

Object

column SNMPv2-SMIInteger32 
The number of occurrences, since the last reset, where the system
input voltage has fallen below a pre-determined threshold for a
specified amount of time.

Context

MIB
ACS8000-MIB
OID
.1.3.6.1.4.1.10418.26.2.5.12.1.11
Type
column
Access
readonly
Status
current
Parent
acsPowerMgmtUPSTableEntry
Table
acsPowerMgmtUPSTable
Siblings
23

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
acsPowerMgmtUPSTablePortNumber
Number of serial port when the UPS is connected.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.10418.26.2.5.12.1.1
acsPowerMgmtUPSTableInputBlackOutCount
The number of occurrences, since the last reset, where the input was not qualified to provide power to the system.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.26.2.5.12.1.10
acsPowerMgmtUPSTableInletAirTemperature
Temperature of the inlet air.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.12
acsPowerMgmtUPSTableNumberOutletGroups
The number of Outlet Groups on this UPS
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.26.2.5.12.1.13
acsPowerMgmtUPSTableUPSSerialNumber
System serial number.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.14
acsPowerMgmtUPSTableUPSManufactureDate
Manufacturing date of the system.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.15
acsPowerMgmtUPSTableAutoRestartDelay
If power is lost, the control will delay this amount of time after power is restored before restarting the unit.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10418.26.2.5.12.1.16
acsPowerMgmtUPSTableAutoRestartControl
When set to enabled, the UPS will automatically restart the load when utility power is restored after a battery discharge.
columnEnumeration.1.3.6.1.4.1.10418.26.2.5.12.1.17
acsPowerMgmtUPSTableAudibleAlarmControl
Audible alarm control.
columnEnumeration.1.3.6.1.4.1.10418.26.2.5.12.1.18
acsPowerMgmtUPSTableSilenceAlarm
Silence audible alarm.
columnEnumeration.1.3.6.1.4.1.10418.26.2.5.12.1.19
acsPowerMgmtUPSTableUpsIndex
A UPS position in the chain.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.10418.26.2.5.12.1.2
acsPowerMgmtUPSTableInverterState
Inverter on/off state.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.20
acsPowerMgmtUPSTableDCConverterStatus
The operating state of the dc converter.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.21
acsPowerMgmtUPSTableShutdownReason
The reason for the most recent shutdown.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.22
acsPowerMgmtUPSTableUPSTopology
UPS Topology.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.23
acsPowerMgmtUPSTableBypassInverterInputConfig
Input source configuration for the bypass and inverter.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.24
acsPowerMgmtUPSTableUpsId
UPS identification.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.3
acsPowerMgmtUPSTablePortName
Name of serial port or IP address if network device
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.4
acsPowerMgmtUPSTableModel
Model of the UPS.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.5
acsPowerMgmtUPSTableVendor
Vendor of the UPS.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.6
acsPowerMgmtUPSTableFirmwareVersion
Version of the UPS firmware.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.7
acsPowerMgmtUPSTableAgentFirmwareVersion
Firmware version of the agent card.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.8
acsPowerMgmtUPSTableSystemStatus
System Status of the UPS.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.10418.26.2.5.12.1.9