acsPowerMgmtUPSTableAudibleAlarmControl
ACS8000-MIB ·
.1.3.6.1.4.1.10418.26.2.5.12.1.18
Object
column
r/w
Enumeration
Audible alarm control.
Context
- MIB
- ACS8000-MIB
- OID
.1.3.6.1.4.1.10418.26.2.5.12.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- acsPowerMgmtUPSTableEntry
- Table
- acsPowerMgmtUPSTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acsPowerMgmtUPSTablePortNumber Number of serial port when the UPS is connected. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10418.26.2.5.12.1.1 |
| acsPowerMgmtUPSTableInputBlackOutCount The number of occurrences, since the last reset, where the input
was not qualified to provide power to the system. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.5.12.1.10 |
| acsPowerMgmtUPSTableInputBrownOutCount The number of occurrences, since the last reset, where the system
input voltage has fallen below a pre-determined threshold for a
specified amount of time. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.5.12.1.11 |
| acsPowerMgmtUPSTableInletAirTemperature Temperature of the inlet air. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.12 |
| acsPowerMgmtUPSTableNumberOutletGroups The number of Outlet Groups on this UPS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.5.12.1.13 |
| acsPowerMgmtUPSTableUPSSerialNumber System serial number. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.14 |
| acsPowerMgmtUPSTableUPSManufactureDate Manufacturing date of the system. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.15 |
| acsPowerMgmtUPSTableAutoRestartDelay If power is lost, the control will delay this amount of
time after power is restored before restarting the unit. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.5.12.1.16 |
| acsPowerMgmtUPSTableAutoRestartControl When set to enabled, the UPS will automatically restart the load
when utility power is restored after a battery discharge. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.5.12.1.17 |
| acsPowerMgmtUPSTableSilenceAlarm Silence audible alarm. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.5.12.1.19 |
| acsPowerMgmtUPSTableUpsIndex A UPS position in the chain. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.10418.26.2.5.12.1.2 |
| acsPowerMgmtUPSTableInverterState Inverter on/off state. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.20 |
| acsPowerMgmtUPSTableDCConverterStatus The operating state of the dc converter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.21 |
| acsPowerMgmtUPSTableShutdownReason The reason for the most recent shutdown. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.22 |
| acsPowerMgmtUPSTableUPSTopology UPS Topology. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.23 |
| acsPowerMgmtUPSTableBypassInverterInputConfig Input source configuration for the bypass and inverter. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.24 |
| acsPowerMgmtUPSTableUpsId UPS identification. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.3 |
| acsPowerMgmtUPSTablePortName Name of serial port or IP address if network device | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.4 |
| acsPowerMgmtUPSTableModel Model of the UPS. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.5 |
| acsPowerMgmtUPSTableVendor Vendor of the UPS. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.6 |
| acsPowerMgmtUPSTableFirmwareVersion Version of the UPS firmware. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.7 |
| acsPowerMgmtUPSTableAgentFirmwareVersion Firmware version of the agent card. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.8 |
| acsPowerMgmtUPSTableSystemStatus System Status of the UPS. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10418.26.2.5.12.1.9 |