acsModemsTableEntry
ACS8000-MIB ·
.1.3.6.1.4.1.10418.26.2.8.2.1
Object
row
Each entry has the information about a specific modem.
Context
- MIB
- ACS8000-MIB
- OID
.1.3.6.1.4.1.10418.26.2.8.2.1- Type
- row
- Status
- current
- Parent
- acsModemsTable
- Table
- acsModemsTable
- Children
- 37
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acsModemsTableNumber A unique index representing an entry in this table. | column | Integer32 | .1.3.6.1.4.1.10418.26.2.8.2.1.1 |
| acsModemsTableRemoteIpv4Address Configures the remote IPv4 address for the PPP connection. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.10 |
| acsModemsTableLocalIPv6Address Configures the local IPv6 address for the PPP connection. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.11 |
| acsModemsTableRemoteIPv6Address Configures the remote IPv6 address for the PPP connection. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.12 |
| acsModemsTablePppAuthentication Configure the PPP authentication protocol. If this is set to remoteChap(5) or
remotePap(6), then you must also set acsModemsTablePppRemoteUsername
and acsModemsTablePppRemotePass… | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.13 |
| acsModemsTablePppRemoteUsername Only used if acsModemsTablePppAuthentication is set to
remoteChap(5) or remotePap(6). | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.14 |
| acsModemsTablePppRemotePassphrase Only used if acsModemsTablePppAuthentication is set to
remoteChap(5) or remotePap(6). | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.15 |
| acsModemsTableChapInterval CHAP Interval in seconds. Default is 0.
Not used for integrated cellular modem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.8.2.1.16 |
| acsModemsTableChapMaxChallenge CHAP Max Challenge value in seconds. Default is 10 seconds.
Not used for integrated cellular modem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.8.2.1.17 |
| acsModemsTableChapRestart CHAP Restart value in seconds. Default is 3 seconds.
Not used for integrated cellular modem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.8.2.1.18 |
| acsModemsTablePppIdleTimeout PPP idle timeout value in seconds. Default is 0.
Not used for integrated cellular modem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.8.2.1.19 |
| acsModemsTableDeviceName The associated device name for the modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.2 |
| acsModemsTableModel Modem vendor model name. Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.20 |
| acsModemsTableCellProvider Cellular modem service provider. Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.21 |
| acsModemsTableCellRegistration Cellular modem network registration. Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.22 |
| acsModemsTableCCID SIM integrated circuit card identifier. Only used for integrated
cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.23 |
| acsModemsTableIMSI International mobile subscriber identity. Only used for integrated
cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.24 |
| acsModemsTableIMEI International mobile equipment identity. Only used for integrated
cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.25 |
| acsModemsTableCellStatus Shows the status of the cellular modem. Only used for integrated
cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.26 |
| acsModemsTableAPN Access point name. Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.27 |
| acsModemsTableMtuSize The maxiumum transmission unit size for use by the integrated cellular modem. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10418.26.2.8.2.1.28 |
| acsModemsTableReplaceDefaultRoute If this is set to enabled(2), then the integrated cellular modem
becomes the default gateway. Only used for integrated cellular
modem. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.29 |
| acsModemsTableStatus Enables or disbles the modem. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.3 |
| acsModemsTablePersistMode If this is set to 'yes' then the integrated cellular modem connection persists.
Only used for integrated cellular modem. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.30 |
| acsModemsTableSignalQualityCheck Check the signal quality of the integrated cellular modem. This
turns on the modem transceiver to get the signal. The signal quality can be read
in acsModemsTableSignalQualityDi… | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.31 |
| acsModemsTableSignalQualityDisplay Displays the last read signal quality of the integrated cellular modem.
To refresh this value write signalCheck(2) to acsModemsTableSignalQualityCheck. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.32 |
| acsModemsTableSIMStatus Status of the modem SIM card. Only used for integrated cellular modem. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.33 |
| acsModemsTableSIMPINEntry Modem SIM card PIN/Password entry. Writable only if acsModemsTableSIMStatus
returns waitingForPIN(2). Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.34 |
| acsModemsTableSIMUnlockCodeEntry Modem SIM card Unlock Code entry. Writable only if acsModemsTableSIMStatus
returns waitingForUnlockCode(3). Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.35 |
| acsModemsTableCellTestLastStarted The timestamp of the last time the Cell Modem IP Test started running.
Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.36 |
| acsModemsTableCellTestLastResult The result of the last time the Cell Modem IP Test was run.
Only used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.37 |
| acsModemsTableProfile The modem profile. For an integrated cell modem, only dial-out(3) is valid. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.4 |
| acsModemsTablePhoneNumber The dial-out phone number. Only supported if acsModemsTableProfile is
set to dial-out(3). Not used for integrated cellular modem. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.5 |
| acsModemsTableComSpeed The modem speed. Speeds above 230400 not supported by serial port modems. | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.6 |
| acsModemsTableInitChat Modem initialization string. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.7 |
| acsModemsTablePppAddressConfig Supported only if acsModemsTableProfile is set to dial-out(2).
If none(1) or remote(3) is set, then the IP address fields will be cleared.
When at least one IP address is set, thi… | column | Enumeration | .1.3.6.1.4.1.10418.26.2.8.2.1.8 |
| acsModemsTableLocalIpv4Address Configures the local IPv4 address for the PPP connection. | column | OctetString | .1.3.6.1.4.1.10418.26.2.8.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| acsModemsTableNumber A unique index representing an entry in this table. | column | Integer32 | .1.3.6.1.4.1.10418.26.2.8.2.1.1 |