ZXDS1-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
31
zxDsx1ConfigTable
table.1.3.6.1.4.1.3902.1015.1013.2.1.1.1
·
1 row entry
·
31 columns
The DS1 Configuration table.
An entry in the DS1 Configuration table.
Indexes
zxDsx1LineIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxDsx1LineIndex
This object should be made equal to ifIndex. The
next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTable and ds0/ds0bundle mibs. Previously, this… |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.1 |
||||||||||||||||||||||||||
|
zxDsx1IfIndex
deprecated
This value for this object is equal to the value
of ifIndex from the Interfaces table of MIB II (RFC 1213). |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.2 |
||||||||||||||||||||||||||
|
zxDsx1TimeElapsed
The number of seconds that have elapsed since the
beginning of the near end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds th… |
Integer32 Constraints: range: 0-899 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.3 |
||||||||||||||||||||||||||
|
zxDsx1ValidIntervals
The number of previous near end intervals for
which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 m… |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.4 |
||||||||||||||||||||||||||
|
zxDsx1LineType
This variable indicates the variety of DS1
Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.5 |
||||||||||||||||||||||||||
|
zxDsx1LineCoding
This variable describes the variety of Zero Code
Suppression used on this interface, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppression, in which the AT… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.6 |
||||||||||||||||||||||||||
|
zxDsx1SendCode
This variable indicates what type of code is
being sent across the DS1 interface by the device. Setting this variable causes the interface to send the code requested. The values mean: dsx1SendNoCode sending looped or n… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.7 |
||||||||||||||||||||||||||
|
zxDsx1CircuitIdentifier
This variable contains the transmission vendor's
circuit identifier, for the purpose of facilitating troubleshooting. |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.8 |
||||||||||||||||||||||||||
|
zxDsx1LoopbackConfig
This variable represents the desired loopback
configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does no… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.9 |
||||||||||||||||||||||||||
|
zxDsx1LineStatus
This variable indicates the Line Status of the
interface. It contains loopback, failure, received 'alarm' and transmitted 'alarms information. The zxDsx1LineStatus is a bit map represented as a sum, ther… |
Integer32 Constraints: range: 1-131071 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.10 |
||||||||||||||||||||||||||
|
zxDsx1SignalMode
'none' indicates that no bits are reserved for
signaling on this channel. 'robbedBit' indicates that DS1 Robbed Bit Signaling is in use. 'bitOriented' indicates that E1 Channel Associated S… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.11 |
||||||||||||||||||||||||||
|
zxDsx1TransmitClockSource
The source of Transmit Clock.
'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used or when an external clock is … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.12 |
||||||||||||||||||||||||||
|
zxDsx1Fdl
This bitmap describes the use of the facilities
data link, and is the sum of the capabilities. Set any bits that are appropriate: other(1), dsx1AnsiT1403(2), dsx1Att54016(4), dsx1FdlNone(8) … |
Integer32r/w Constraints: range: 1-15 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.13 |
||||||||||||||||||||||||||
|
zxDsx1InvalidIntervals
The number of intervals in the range from 0 to
zxDsx1ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy … |
Integer32 Constraints: range: 0-96 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.14 |
||||||||||||||||||||||||||
|
zxDsx1LineLength
The length of the ds1 line in meters. This
objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry. |
metersInteger32r/w Constraints: range: 0-64000 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.15 |
||||||||||||||||||||||||||
|
zxDsx1LineStatusLastChange
The value of MIB II's sysUpTime object at the
time this DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a ze… |
SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp Unsigned32 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.16 |
||||||||||||||||||||||||||
|
zxDsx1LineStatusChangeTrapEnable
Indicates whether dsx1LineStatusChange traps
should be generated for this interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.17 |
||||||||||||||||||||||||||
|
zxDsx1LoopbackStatus
This variable represents the current state of the
loopback on the DS1 interface. It contains information about loopbacks established by a manager and remotely from the far end. The zxDsx1LoopbackStatus i… |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.18 |
||||||||||||||||||||||||||
|
zxDsx1Ds1ChannelNumber
This variable represents the channel number of
the DS1/E1 on its parent DS2/E2 or DS3/E3. A value of 0 indicated this DS1/E1 does not have a parent DS3/E3. |
Integer32 Constraints: range: 0-28 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.19 |
||||||||||||||||||||||||||
|
zxDsx1Channelization
Indicates whether this ds1/e1 is channelized or
unchannelized. The value of enabledDs0 indicates that this is a DS1 channelized into DS0s. The value of enabledDs1 indicated that this is a DS2 channelized into DS1s. S… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.20 |
||||||||||||||||||||||||||
|
zxDsx1LineMode
This setting puts the T1 framer into either long
haul (CSU) mode or short haul (DSU) mode. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.21 |
||||||||||||||||||||||||||
|
zxDsx1LineBuildOut
Attenuation setting for T1 framer in long haul
(CSU) mode. The optional values are: -7.5dB, -15dB, -22.5dB and 0dB. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.22 |
||||||||||||||||||||||||||
|
zxDsx1AdminStatus
The desired state of the interface. The
testing(3) state indicates that no operational packets can be passed. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.23 |
||||||||||||||||||||||||||
|
zxDsx1OperStatus
The current operational state of the interface.
The testing(3) state indicates that no operational packets can be passed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.24 |
||||||||||||||||||||||||||
|
zxDsx1ClockStatus
The current clock state of the interface. the value can be:
FREERUN 0 HOLDOVER 1 ACQUIRING 2 ACUIRED 3 |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.25 |
||||||||||||||||||||||||||
|
zxDsx1CfgInfoSend
The action to send the configuration on
Ds1/E1 interface to corresponding card. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.26 |
||||||||||||||||||||||||||
|
zxDsx1Retiming
Enable or disable Ds1/E1 interface retiming.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.27 |
||||||||||||||||||||||||||
| zxDsx1Impedance | Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.28 |
||||||||||||||||||||||||||
| zxDsx1FrameType | Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.29 |
||||||||||||||||||||||||||
| zxDsx1BER | Integer32 Constraints: range: 0-1000000 |
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.30 |
||||||||||||||||||||||||||
|
zxDsx1ClockStatusTrapEnable
Indicates whether zxDsx1ClockStatus traps
should be generated for this interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.1013.2.1.1.1.1.31 |