ZTE-AN-ZESR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
15
.1.3.6.1.4.1.3902.1015.9.1.1 · 1 row entry · 15 columns
This table defines ZTE EAPS information on this device.
zxAnZesrEntry entry .1.3.6.1.4.1.3902.1015.9.1.1.1
Indexes
zxAnZesrCtrlVlanId
Column Syntax OID
zxAnZesrCtrlVlanId
This object indicates the 'Control VLAN' that can always pass
through all ports in the EAPS Domain, including the secondary port
of the master node.
ZTE-AN-TC-MIBVlanId
Textual Convention: ZTE-AN-TC-MIBVlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.3902.1015.9.1.1.1.1
zxAnZesrCtrlVlanMstpInstance
This object indicates the MSTP instance id.
This object is no use for F829.
Integer32r/w
Constraints:
range: 1-16
.1.3.6.1.4.1.3902.1015.9.1.1.1.2
zxAnZesrNodeType
Each EAPS Domain has a single designated 'master node'. All other
nodes on that ring are referred to as 'transit nodes'.
When a node is configured as 'transit node', the node could be
configured as a standby master no…
Enumerationr/w
Enumerated Values:
1master
2transit
.1.3.6.1.4.1.3902.1015.9.1.1.1.3
zxAnZesrPrimaryPort
Each node on the ring will have 2 ports connected to the ring.
One port of the master node is designated as the 'primary port' to
the ring, while the other port is designated as the 'secondary
port'.
ZTE-AN-TC-MIBZxAnIfindexr/w
Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32
.1.3.6.1.4.1.3902.1015.9.1.1.1.4
zxAnZesrSecondaryPort
This object indicates the 'secondary port' of this node.
ZTE-AN-TC-MIBZxAnIfindexr/w
Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32
.1.3.6.1.4.1.3902.1015.9.1.1.1.5
zxAnZesrProtectVlanMstpInstance
This object indicates the MSTP instance id.
This object is no use for F829.
Integer32r/w
Constraints:
range: 1-16
.1.3.6.1.4.1.3902.1015.9.1.1.1.6
zxAnZesrHealthCheckInterval
The master node sends a health-check frame on the Control VLAN at a
user-configurable interval.
msInteger32r/w
Constraints:
range: 10-1000
.1.3.6.1.4.1.3902.1015.9.1.1.1.7
zxAnZesrFailPeriodTime
The master node sends a health-check frame on the Control VLAN at a
user-configurable interval. If the ring is complete, the health-
check frame will be received on its secondary port, where the master
node will reset …
msInteger32r/w
Constraints:
range: 10-3000
.1.3.6.1.4.1.3902.1015.9.1.1.1.8
zxAnZesrPreForwardingTime
During the time between the transit node detecting that its link is
restored and the master node detecting that the ring is restored,
the secondary port of the master node is still open -- creating the
possibility of a…
msInteger32r/w
Constraints:
range: 10-3000
.1.3.6.1.4.1.3902.1015.9.1.1.1.9
zxAnZesrDomainState
This indicates the current EAPS state of this EAPS domain.
Enumeration
Enumerated Values:
1idle
2complete
3failed
4linksup
5linkdown
6preforwarding
7init
.1.3.6.1.4.1.3902.1015.9.1.1.1.10
zxAnZesrPrimaryPortState
This indicates the primary port state of this EAPS domain.
Enumeration
Enumerated Values:
1block
2preforward
3forward
.1.3.6.1.4.1.3902.1015.9.1.1.1.11
zxAnZesrSecondaryPortState
This indicates the secondary port state of this EAPS domain.
Enumeration
Enumerated Values:
1block
2preforward
3forward
.1.3.6.1.4.1.3902.1015.9.1.1.1.12
zxAnZesrProtectVlanList
This object indicates the protected vlan list that are configured
on all ports in the ring for the given EAPS domain. Each bit of the
512 bytes(4096 bits) represents the status of corresponding VLAN,
bit 0 represents …
OctetStringr/w
Constraints:
range: 512-512
.1.3.6.1.4.1.3902.1015.9.1.1.1.13
zxAnZesrStandbyEnable
Enable or disable a transit node as a standby master node. As the
master node is down, this standby master node will work as master
node in the EAPS domain.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.1015.9.1.1.1.14
zxAnZesrRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.3902.1015.9.1.1.1.50