zxAnZesrSecondaryPort
ZTE-AN-ZESR-MIB ·
.1.3.6.1.4.1.3902.1015.9.1.1.1.5
Object
This object indicates the 'secondary port' of this node.
Context
- MIB
- ZTE-AN-ZESR-MIB
- OID
.1.3.6.1.4.1.3902.1015.9.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnZesrEntry
- Table
- zxAnZesrTable
- Siblings
- 14
Syntax
ZTE-AN-TC-MIBZxAnIfindex
- Source
- ZTE-AN-TC-MIBZxAnIfindex
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnZesrCtrlVlanId This object indicates the 'Control VLAN' that can always pass
through all ports in the EAPS Domain, including the secondary port
of the master node. | column | ZTE-AN-TC-MIBVlanId | .1.3.6.1.4.1.3902.1015.9.1.1.1.1 |
| zxAnZesrDomainState This indicates the current EAPS state of this EAPS domain. | column | Enumeration | .1.3.6.1.4.1.3902.1015.9.1.1.1.10 |
| zxAnZesrPrimaryPortState This indicates the primary port state of this EAPS domain. | column | Enumeration | .1.3.6.1.4.1.3902.1015.9.1.1.1.11 |
| zxAnZesrSecondaryPortState This indicates the secondary port state of this EAPS domain. | column | Enumeration | .1.3.6.1.4.1.3902.1015.9.1.1.1.12 |
| zxAnZesrProtectVlanList This object indicates the protected vlan list that are configured
on all ports in the ring for the given EAPS domain. Each bit of the
512 bytes(4096 bits) represents the status o… | column | OctetString | .1.3.6.1.4.1.3902.1015.9.1.1.1.13 |
| zxAnZesrStandbyEnable Enable or disable a transit node as a standby master node. As the
master node is down, this standby master node will work as master
node in the EAPS domain. | column | Enumeration | .1.3.6.1.4.1.3902.1015.9.1.1.1.14 |
| zxAnZesrCtrlVlanMstpInstance This object indicates the MSTP instance id.
This object is no use for F829. | column | Integer32 | .1.3.6.1.4.1.3902.1015.9.1.1.1.2 |
| zxAnZesrNodeType Each EAPS Domain has a single designated 'master node'. All other
nodes on that ring are referred to as 'transit nodes'.
When a node is configured as 'transit node', the node cou… | column | Enumeration | .1.3.6.1.4.1.3902.1015.9.1.1.1.3 |
| zxAnZesrPrimaryPort Each node on the ring will have 2 ports connected to the ring.
One port of the master node is designated as the 'primary port' to
the ring, while the other port is designated as t… | column | ZTE-AN-TC-MIBZxAnIfindex | .1.3.6.1.4.1.3902.1015.9.1.1.1.4 |
| zxAnZesrRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.9.1.1.1.50 |
| zxAnZesrProtectVlanMstpInstance This object indicates the MSTP instance id.
This object is no use for F829. | column | Integer32 | .1.3.6.1.4.1.3902.1015.9.1.1.1.6 |
| zxAnZesrHealthCheckInterval The master node sends a health-check frame on the Control VLAN at a
user-configurable interval. | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.9.1.1.1.7 |
| zxAnZesrFailPeriodTime The master node sends a health-check frame on the Control VLAN at a
user-configurable interval. If the ring is complete, the health-
check frame will be received on its secondary… | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.9.1.1.1.8 |
| zxAnZesrPreForwardingTime During the time between the transit node detecting that its link is
restored and the master node detecting that the ring is restored,
the secondary port of the master node is sti… | column | ms Integer32 | .1.3.6.1.4.1.3902.1015.9.1.1.1.9 |