ZTE-AN-EVNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
59

zxAnEventConfTable

table
.1.3.6.1.4.1.3902.1015.190.4.1 · 1 row entry · 3 columns
Open in standard view 
A list of trap destination entries.
zxAnEventConfEntry entry .1.3.6.1.4.1.3902.1015.190.4.1.1
This entry includes a destination IP address to which traps are
sent for this community.
Indexes
zxAnEventConfTrapOid
Column Syntax OID
zxAnEventConfTrapOid
Event trap oid.
ObjectIdentifier .1.3.6.1.4.1.3902.1015.190.4.1.1.1
zxAnEventName
The name of an event.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3902.1015.190.4.1.1.2
zxAnEventConfSeverityLevel
Severity Level of an event.
Enumerationr/w
Enumerated Values:
0critical
1major
2minor
3warning
4indeterminate
 .1.3.6.1.4.1.3902.1015.190.4.1.1.3

zxAnEventCtrlProfileTable

table
.1.3.6.1.4.1.3902.1015.190.4.3 · 1 row entry · 4 columns
Open in standard view 
Event control profile table.
When an event is added to profile, interface that the profile 
is applied to will enable the event.
zxAnEventCtrlProfileEntry entry .1.3.6.1.4.1.3902.1015.190.4.3.1
Event control profile table entry.
Indexes
zxAnEventCtrlProfileName zxAnEventCode zxAnEventReportChannelType
Column Syntax OID
zxAnEventCtrlProfileName
Event control profile name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.190.4.3.1.1
zxAnEventCode
Event code.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.4.3.1.2
zxAnEventReportChannelType
Event report channel type.
Enumeration
Enumerated Values:
1snmp
2extendedOam
3omci
 .1.3.6.1.4.1.3902.1015.190.4.3.1.3
zxAnEventCtrlProfileRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.4.3.1.50

zxAnEventIfCfgTable

table
.1.3.6.1.4.1.3902.1015.190.4.4 · 1 row entry · 10 columns
Open in standard view 
Interface event configuration table.
zxAnEventIfCfgEntry entry .1.3.6.1.4.1.3902.1015.190.4.4.1
Interface event configuration table entry.
Indexes
zxAnEventIfCfgRack zxAnEventIfCfgShelf zxAnEventIfCfgSlot zxAnEventIfCfgPort zxAnEventIfCfgOnu zxAnEventIfCfgIfType zxAnEventIfCfgLogicalId
Column Syntax OID
zxAnEventIfCfgRack
Rack No. of the interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.4.4.1.1
zxAnEventIfCfgShelf
Shelf No. of the interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.4.4.1.2
zxAnEventIfCfgSlot
Slot No. of the interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.4.4.1.3
zxAnEventIfCfgPort
Physical port No. of the interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.4.4.1.4
zxAnEventIfCfgOnu
The ONU number. It is 0 in DSL port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.4.4.1.5
zxAnEventIfCfgIfType
Type of the interface.
Enumeration
Enumerated Values:
1physicalPort
2bridgePort
3ponOnu
4ponVPort
5onuUni
11servicePort
12vlan
255card
 .1.3.6.1.4.1.3902.1015.190.4.4.1.6
zxAnEventIfCfgLogicalId
Logic index of the interface.

If zxAnEventConfIfType is 'physicalPort', its value is 0.

If zxAnEventConfIfType is 'bridgePort', this object
indicates 'pvc', such as oid '1' indicates 'PVC1'…
ObjectIdentifier .1.3.6.1.4.1.3902.1015.190.4.4.1.7
zxAnEventIfCfgMaskEnable
Enables or disables to mask a specified event for interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.190.4.4.1.8
zxAnEventIfCfgProfileName
Interface event control profile name.
When an event control profile is applied to the interface, the
events added to the event control profile will be enabled for the
interface.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.190.4.4.1.9
zxAnEventIfCfgRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.4.4.1.50

zxAnEventVlanCfgTable

table
.1.3.6.1.4.1.3902.1015.190.4.5 · 1 row entry · 4 columns
Open in standard view 
VLAN event configuration table.
zxAnEventVlanCfgEntry entry .1.3.6.1.4.1.3902.1015.190.4.5.1
VLAN event configuration table entry.
Indexes
zxAnEventVlanCfgVlanId
Column Syntax OID
zxAnEventVlanCfgVlanId
VLAN ID.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1015.190.4.5.1.1
zxAnEventVlanCfgMaskEnable
Enables or disables to mask a specified event for VLAN ID.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.190.4.5.1.2
zxAnEventVlanCfgProfileName
VLAN event control profile name.
When an event control profile is applied to the VLAN ID, the
events added to the event control profile will be enabled for
the VLAN ID.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.190.4.5.1.3
zxAnEventVlanCfgRowStatus
The row status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.4.5.1.50

zxAnEventRecieverTable

table
.1.3.6.1.4.1.3902.1015.190.5.1 · 1 row entry · 12 columns
Open in standard view 
A list of trap destination entries.
zxAnEventRecieverEntry entry .1.3.6.1.4.1.3902.1015.190.5.1.1
This entry includes a destination IP address to which traps are
sent for this community.
Indexes
zxAnEventReceiverIndex
Column Syntax OID
zxAnEventReceiverIndex
The index of a reciever.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.3902.1015.190.5.1.1.1
zxAnEventReceiverIpAddr
The destination address for traps on behalf of this entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1015.190.5.1.1.2
zxAnEventReceiverSnmpVer
It is the snmp version which a reciever expects.
Enumerationr/w
Enumerated Values:
1snmpV1
2snmpV2c
3snmpV3
 .1.3.6.1.4.1.3902.1015.190.5.1.1.3
zxAnEventReceiverCommunity
The community that a reciever expects.
OctetStringr/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.3902.1015.190.5.1.1.4
zxAnEventReceiverEventFormat
It is the event format which a reciever expects.
Trap is a event sent to manager and no confirm is needed.
But inform need the confirm from a manager.
The value of snmpTrapForPccw(3) is only supported
by PCCW MSAG5200V3.
Enumerationr/w
Enumerated Values:
1snmpTrap
2snmpInform
3snmpTrapForPccw
 .1.3.6.1.4.1.3902.1015.190.5.1.1.5
zxAnEventReceiverEventType
The event type that a reciever expects.

The event type are defined in ITU-T X.733.

- equipment event type:
An event of this type is principally
associated with an equipment fault;
…
Bitsr/w
Enumerated Values:
0equipmentEvent
1qualityOfServiceEvent
2communicationsEvent
3environmentEvent
4processingErrorEvent
 .1.3.6.1.4.1.3902.1015.190.5.1.1.6
zxAnEventReceiverMinEventLevel
The min event level that a reciever expects.If the actual event
level is more serious then this value,the event will be sent to
Event Reciever. For example,if this value is cleared(5),all the
events that the level in…
Enumerationr/w
Enumerated Values:
0critical
1major
2minor
3warning
4indeterminate
5cleared
6notification
 .1.3.6.1.4.1.3902.1015.190.5.1.1.7
zxAnEventReceiverEnable
Enable or disable a reciever to recieve the event.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.190.5.1.1.8
zxAnEventReceiverIsZteNmsSever
If or not it is a zte's nms.
true(1): it is a zte's nms;
false(2): it is not a zte's nms.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3902.1015.190.5.1.1.9
zxAnEventReceiverSecurityLevel
A level of security at which SNMP messages can be
sent or with which operations are being processed;
in particular, one of:
noAuthNoPriv - without authentication and without privacy,
authNoPriv - with authentication b…
Enumerationr/w
Enumerated Values:
1noAuthNoPriv
2authNoPriv
3authPriv
 .1.3.6.1.4.1.3902.1015.190.5.1.1.10
zxAnEventReceiverPort
The port number of the event receiver.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.1015.190.5.1.1.11
zxAnEventReceiverRowStatus
This entry's row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.5.1.1.15

zxAnEventSyslogTable

table
.1.3.6.1.4.1.3902.1015.190.7.1 · 1 row entry · 7 columns
Open in standard view 
syslog host config table.
zxAnEventSyslogEntry entry .1.3.6.1.4.1.3902.1015.190.7.1.1
An entry in zxAnEventSyslogTable.
Indexes
zxAnEventSyslogSvrIpAddr
Column Syntax OID
zxAnEventSyslogSvrIpAddr
The syslog server ip address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1015.190.7.1.1.1
zxAnEventSyslogSvrPort
The syslog destination udp port.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.7.1.1.2
zxAnEventSyslogType
The syslog type that a reciever expects.
Bitsr/w
Enumerated Values:
0cmdlog
1snmplog
2debugmsg
3alarmlog
 .1.3.6.1.4.1.3902.1015.190.7.1.1.3
zxAnEventSyslogMinAlarmLevel
Enable/Disable the snmp log in syslog.
Enumerationr/w
Enumerated Values:
1major
2minor
3warning
4indeterminate
5cleared
6notification
 .1.3.6.1.4.1.3902.1015.190.7.1.1.4
zxAnEventSyslogEnable
Enable/Disable the syslog config.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.190.7.1.1.5
zxAnEventSyslogSnmpOperType
For snmp, specify the operation type that the receiver expects.
Enumerationr/w
Enumerated Values:
1all
2get
3set
 .1.3.6.1.4.1.3902.1015.190.7.1.1.6
zxAnEventSyslogRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.7.1.1.30

zxAnEventDefineTable

table
.1.3.6.1.4.1.3902.1015.190.8.2 · 1 row entry · 10 columns
Open in standard view 
Event definition table.
zxAnEventDefineEntry entry .1.3.6.1.4.1.3902.1015.190.8.2.1
Event definition table entry.
Indexes
zxAnEventDefineCode zxAnEventDefineReportChannelType
Column Syntax OID
zxAnEventDefineCode
Event or alarm code.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.8.2.1.1
zxAnEventDefineReportChannelType
Event report channel type.
snmp(1) - event is reported to NMS by SNMP.
ponExtendedOam(2) - event is reported to NMS by EPON extend OAM.
ponOmci(3) - event is reported to NMS by GPON OMIC.
Enumeration
Enumerated Values:
1snmp
2ponExtendedOam
3ponOmci
 .1.3.6.1.4.1.3902.1015.190.8.2.1.2
zxAnEventDefineName
Event name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.190.8.2.1.3
zxAnEventDefineStandardAlarmCode
Standard alarm code is just used by events of EPON extend OAM or
GPON OMCI.
Value 0 means SNMP trap.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.8.2.1.4
zxAnEventDefineEventType
The event type are defined in ITU-T X.733.

- equipment event type:
An event of this type is principally associated with an
equipment fault;

- quality of service event type:
A…
Bits
Enumerated Values:
0equipmentEvent
1qualityOfServiceEvent
2communicationsEvent
3environmentEvent
4processingErrorEvent
 .1.3.6.1.4.1.3902.1015.190.8.2.1.5
zxAnEventDefineAdminStatus
Enables or disables a specified event.
If disable(2), event will not be pushed into alarm pool and
discarded directly.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.190.8.2.1.6
zxAnEventDefineMaskEnable
Enable or disable the event mask.
If enable(1), event will be pushed into alarm pool, but not be
reported to NMS. At the same time, a message will be sent to NMS
to restore the event that has been reported.
…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.190.8.2.1.7
zxAnEventDefineSendingDelay
Event sending delay.
Value 0 means event is sent without delay.

This object is used to prevent that event and restoring event occur
frequently in a short time.
secondsInteger32r/w
Constraints:
range: 0-1800
 .1.3.6.1.4.1.3902.1015.190.8.2.1.8
zxAnEventDefineSendingLimit
Limit the number of specified event sending per second.
Value 0 means no limit.

This object is used to prevent sending too many events to NMS at
the same time.
secondsInteger32r/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.3902.1015.190.8.2.1.9
zxAnEventDefineReversalEnable
Enable or disable alarm reversal.
If enable(1), device will not report the alarm generated by an
unused service or managed entity.
But if the service or managed entity is not idle,then the alarming
process will be no…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.190.8.2.1.10

zxAnEventRptCtrlProfileTable

table
.1.3.6.1.4.1.3902.1015.190.9.2.1 · 1 row entry · 2 columns
Open in standard view 
Event control profile table.
zxAnEventRptCtrlProfileEntry entry .1.3.6.1.4.1.3902.1015.190.9.2.1.1
Event reporting control profile table entry.
Indexes
zxAnEventRptCtrlPrfName
Column Syntax OID
zxAnEventRptCtrlPrfName
Event control profile name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.190.9.2.1.1.1
zxAnEventRptCtrlPrfRowStatus
The row status of this entry.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
creat…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.9.2.1.1.50

zxAnEventRptCtrlProfileRuleTable

table
.1.3.6.1.4.1.3902.1015.190.9.2.2 · 1 row entry · 4 columns
Open in standard view 
Event control profile rule table.
zxAnEventRptCtrlProfileRuleEntry entry .1.3.6.1.4.1.3902.1015.190.9.2.2.1
Event reporting control profile rule table entry.

When a manager wants to create a control profile rule, it must
comply with the multi-variables usage rule that all the mib
variables related to same fuct…
Indexes
zxAnEventRptCtrlPrfName zxAnEventRptCtrlPrfRuleIndex
Column Syntax OID
zxAnEventRptCtrlPrfRuleIndex
Event control profile rule index.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.190.9.2.2.1.1
zxAnEventRptCtrlEventCode
Event code.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.190.9.2.2.1.2
zxAnEventRptCtrlAdminStatus
Defined in M.3100 Amendment 3 [M.3100 Amd3], there are five
ARC states: nalm, nalmQI.


nalm: Alarm reporting is turned off (i.e., not allowed).
nalmQI: nalm - Qualified Inhib…
Enumerationr/w
Enumerated Values:
1nalm
2nalmQI
 .1.3.6.1.4.1.3902.1015.190.9.2.2.1.21
zxAnEventRptCtrlPrfRuleRowStatus
The row status of this entry.

The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.9.2.2.1.50

zxAnEventRptCtrlResourceTable

table
.1.3.6.1.4.1.3902.1015.190.9.2.3 · 1 row entry · 3 columns
Open in standard view 
Event control profile table.
zxAnEventRptCtrlResourceEntry entry .1.3.6.1.4.1.3902.1015.190.9.2.3.1
Event reporting control profile table entry.
Indexes
zxAnEventRptCtrlResId
Column Syntax OID
zxAnEventRptCtrlResId
The resource id is of ResourceId type, indicates the
resource id of a event.
ResourceId
Textual Convention: ResourceId ObjectIdentifier
 .1.3.6.1.4.1.3902.1015.190.9.2.3.1.1
zxAnEventRptCtrlResPrfName
Event control profile name.
When the event control profile is applied to a resource id,
the profile name should not be 0 length.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.190.9.2.3.1.2
zxAnEventRptCtrlResRowStatus
The row status of this entry.

The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3902.1015.190.9.2.3.1.50