ZHONE-COM-ATM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

zhoneAtmVclExtTable

table

.1.3.6.1.4.1.5504.4.2.2.1 · 1 row entry · 6 columns

Open in standard view

Zhone extension table for the atmVclTable defined in
rfc2515.

zhoneAtmVclExtEntry entry .1.3.6.1.4.1.5504.4.2.2.1.1

An entry in the atmVclExtTable.

atmVclExtEntry is an augmentation to the atmVclEntry
defined in rfc2515.

Indexes

No indexes recorded

Column Syntax OID

zhoneAtmVclExtFaultDetectionType

This is used to configure VCL fault detection. The valid values
are:

* disabled - Fault detection is disabled. This is the default.
* oamF5Loopback - This option uses standard OAM fault
management cells…

Enumerationr/w

Enumerated Values:

1	disabled
2	oamF5Loopback

.1.3.6.1.4.1.5504.4.2.2.1.1.1

zhoneAtmVclExtOamF5Ping

This is used to send a OAM F5 loopback cell for fault detection.
The value will automatically revert to disabled after the set
is complete. The valid values are:

* disabled - OAM F5 loopback cell is not b…

Enumerationr/w

Enumerated Values:

1	disabled
2	endToEnd
3	segment

.1.3.6.1.4.1.5504.4.2.2.1.1.2

zhoneAtmVclExtOamF5PingStatus

TRUE if ping was successfull and FALSE if failed

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.5504.4.2.2.1.1.3

zhoneAtmVclExtTrafficContainerIndex

Index number of a PON traffic container associated with a
VCL definition.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.5504.4.2.2.1.1.4

zhoneAtmVclExtOamF4Ping

This is used to send a OAM F4 loopback cell for fault detection.
The value will automatically revert to disabled after the set
is complete. The valid values are:

* disabled - OAM F4 loopback cell is not b…

Enumerationr/w

Enumerated Values:

1	disabled
2	endToEnd
3	segment

.1.3.6.1.4.1.5504.4.2.2.1.1.5

zhoneAtmVclExtOamF4PingStatus

TRUE if ping was successfull and FALSE if failed.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.5504.4.2.2.1.1.6

zhoneAtmTrafficDescrParamExtTable

table

.1.3.6.1.4.1.5504.4.2.2.4 · 1 row entry · 3 columns

Open in standard view

Zhone extension table for the  atmTrafficDescrParamTable 
defined in rfc2515.

zhoneAtmTrafficDescrParamExtEntry entry .1.3.6.1.4.1.5504.4.2.2.4.1

This is extension of AtmTrafficDescrParamEntry defined
in rfc2515.

Indexes

No indexes recorded

Column Syntax OID

zhoneAtmTrafficDescrParamExtTrnkVclRate

This field is used to describe the minimum guaranteed rate
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk Cards. It is applicable only for RTVBR service
category.
Unlike switched voice calls in…

Enumerationr/w

Enumerated Values:

1	unused
2	rate16K
3	rate32K
4	rate64K
5	rate80K
6	rate128K
7	rate160K
8	rate256K
9	rate320K
10	rate512K
11	rate640K
12	rate1552K
13	rate2050K
14	rate12M
15	rate16M
16	rate45M
17	rate155M
18	rate960K
19	rate1280K
20	rate1760K
21	rate3M
22	rate4M
23	rate5M
24	rate6M
25	rate7M
26	rate8M
27	rate10M
28	rate14M
29	rate24M
30	rate32M
31	rate64M
32	rate96M
33	rate128M

.1.3.6.1.4.1.5504.4.2.2.4.1.1

zhoneAtmTrafficDescrParamExtCacDivider

This object allows users to oversubsribe. The
rate subtracted from CAC is PCR or SCR divided by
this object.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.5504.4.2.2.4.1.2

zhoneAtmTrafficDescrParamExtUsageParameterControl

If set to 'false', this object disables polcing.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.5504.4.2.2.4.1.3

zhoneAtmStatsExtTable

table

.1.3.6.1.4.1.5504.4.2.2.5 · 1 row entry · 8 columns

Open in standard view

These statistics values are coming from fabric interface.

zhoneAtmStatsExtEntry entry .1.3.6.1.4.1.5504.4.2.2.5.1

Definitions of Forward and Backward:

Internal to ATM Switch Fabric
=============================================================
|Ext|==>IngressFwd==>| |==>EgressFwd====>|Int|
PortPhy<->|VC …

Indexes

No indexes recorded

Column	Syntax	OID
zhoneAtmStatsTotalInitialCellsRx Total Initial Cells Received. Total cells received across the ingress interface for a given VC, and not discarded by policing prior to thresholding (includes CPU insertions but excludes Atm switch fabric generated ing…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.1`
zhoneAtmStatsTotalFabricCellsRx Total Cells Recevied at Fabric.Total cells received across the fabric interface for a given VC, including cells discarded due to parity errors.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.2`
zhoneAtmStatsTotalFinalCLP0CellsRx Total CLP0 Cells received by fabric. This field is setup to monitor egress total cells transmitted CLP0.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.3`
zhoneAtmStatsTotalFinalCLP1CellsRx Total CLP1 Cells received by fabric. This field is setup to monitor egress total cells transmitted CLP1.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.4`
zhoneAtmStatsTotalInitialCellsTx Initial Total Cells Transmitted. Total cells transmitted. across the ingress interface for a given VC, and not discarded by policing prior to thresholding (includes CPU insertions but excludes Atm switch fabric gener…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.5`
zhoneAtmStatsTotalFabricCellsTx Total cells transmitted at fabric interace.Total cells transmitted across the fabric interface for a given VC, including cells discarded due to parity errors.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.6`
zhoneAtmStatsTotalFinalCLP0CellsTx Total CLP0 Cells Transmitted. This field is setup to monitor egress total cells transmitted CLP0.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.7`
zhoneAtmStatsTotalFinalCLP1CellsTx Total CLP1 Cells Transmitted. This field is setup to monitor egress total cells transmitted CLP1.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.5504.4.2.2.5.1.8`

zhoneAtmVplExtTable

table

.1.3.6.1.4.1.5504.4.2.2.7 · 1 row entry · 2 columns

Open in standard view

Zhone extension table for the atmVplTable defined in
rfc2515.

zhoneAtmVplExtEntry entry .1.3.6.1.4.1.5504.4.2.2.7.1

NOT CURRENTLY IMPLEMENTED.

An entry in the atmVplExtTable.

atmVplExtEntry is an augmentation to the atmVplEntry
defined in rfc2515.

Indexes

No indexes recorded

Column Syntax OID

zhoneAtmVplExtFaultDetectionType

NOT CURRENTLY IMPLEMENTED.

This is used to configure VPL fault detection.

The valid values are:

* disabled - Fault detection is disabled.
This is the default.
* oamF4Loopba…

Enumerationr/w

Enumerated Values:

1	disabled
2	oamF4Loopback

.1.3.6.1.4.1.5504.4.2.2.7.1.1

zhoneAtmVplExtTrafficContainerIndex

Index number of a PON traffic container associated with a
VPL definition.

NOTE: MULTIPLE VARBINDS ACROSS THE VPL TABLE AND
THE VPL EXTENSI0N TABLE ARE NOT ALLOWED! It turns out that
anyone trying to set …

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.5504.4.2.2.7.1.2

zhoneAtmConnectionStatsTable

table

.1.3.6.1.4.1.5504.4.2.2.8 · 1 row entry · 2 columns

Open in standard view

Table which describes the allocated and available ATM
connections on a Zhone device.

zhoneAtmConnectionStatsEntry entry .1.3.6.1.4.1.5504.4.2.2.8.1

An entry based on shelf/slot which describes the
total allocated and available ATM connections for
that shelf/slot.

Indexes

ZhonezhoneShelfIndex ZhonezhoneSlotIndex

Column	Syntax	OID
zhoneAtmConnectionsAvailable The total available ATM connections for a particular shelf/slot. This number is hardware dependent. Whenever a VPI is allocated for a particular shelf/slot, the number of connections alloca…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5504.4.2.2.8.1.1`
zhoneAtmConnectionsAllocated The total allocated ATM connections for a particular shelf/slot. For a particular VPI, we calculate the number of connections allocated by the following rule: A VP Switched VPI has a Max VC…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5504.4.2.2.8.1.2`

zhoneAtmVpiTable

table

.1.3.6.1.4.1.5504.4.2.2.9 · 1 row entry · 6 columns

Open in standard view

Table which describes attributes associated to a
particular VPI.
          
Anytime you add to, delete from or modify any entry
in this table, you must reboot the card in order for
these changes to take effect.  The reason for this is
that the APC must be re-programmed and the only way
to do this is by doing a reboot.
          
In addition, you will not be allowed to modify, create
or delete any atm-vcl entry which is on the same card
as the VPI until after the card has been rebooted.

zhoneAtmVpiEntry entry .1.3.6.1.4.1.5504.4.2.2.9.1

An entry based on ifIndex/vpi (which resolves to a
particular shelf/slot/port/subport/type/vpi) which
contains the maximum VCI value and the switch mode
(either vp or vc switched) for a particular VPI.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi

Column Syntax OID

zhoneAtmVpiMaxVci

For the selected VPI, this value contains the maximum
VCI.

For vp switched VPIs, this value must be zero.

For vc switched VPIs, this value must be a power of 2
with its maximum value being …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.5504.4.2.2.9.1.1

zhoneAtmVpiSwitched

For the selected VPI, this value can be set to either
vp switched or vc switched.

If it is vp switched, then the max vci must be zero.

If it is vc switched, the max vci value must be a
powe…

Enumerationr/w

Enumerated Values:

1	vp
2	vc

.1.3.6.1.4.1.5504.4.2.2.9.1.2

zhoneAtmVpiRowStatus

Row Status only supports create-and-go and destroy actions.
Returns active if row is in service.

Zhone-TCZhoneRowStatusr/w

Textual Convention: Zhone-TCZhoneRowStatus Enumeration

Type Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.5504.4.2.2.9.1.3

zhoneAtmVpiOamF4Ping

Enumerationr/w

Enumerated Values:

1	disabled
2	endToEnd
3	segment

.1.3.6.1.4.1.5504.4.2.2.9.1.4

zhoneAtmVpiOamF4PingStatus

TRUE if ping was successfull and FALSE if failed.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.5504.4.2.2.9.1.5

zhoneAtmVpiMaxVciPerVp

If vp-switched, but VG connection is vc-switched,
this specifies max number of vci on gateway.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.5504.4.2.2.9.1.6

atmVclToMulticastMapTable

table

.1.3.6.1.4.1.5504.4.2.2.16.2 · 1 row entry · 7 columns

Open in standard view

The Multicast Address to Vcl Mapping table.  Each 
entry in this table associates a multicast address 
representing a video stream with a Vcl.  All of the
entries in this table are assumed to be unique, not
only in terms of index, but in terms of (index,
multicast address) <-> (ifIndex, vpi, vci).
          
Note that the Vcl type for this table should always
be 'other', denoting cell relay pass-through.  We
are not terminating the IP stream on the MALC.
          
Also note that the Vcls that this table refer to
are the ones originating at the Video Head-End,
coming into the MALC Uplink card.

atmVclToMulticastMapEntry entry .1.3.6.1.4.1.5504.4.2.2.16.2.1

An entry in the Multicast Address to Vcl Mapping table.
This entry is used to associate a multicast address with
a Vcl.

Step-wise Procedures to set up a Multicast Vcl Mapping profile

Once the …

Indexes

atmVclToMulticastMapIndex

Column Syntax OID

atmVclToMulticastMapIndex

A unique value to identify this Multicast Address to
Vcl mapping.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.5504.4.2.2.16.2.1.1

atmVclToMulticastMapRoutingDomain

Routing domain of the Head-End video server.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.5504.4.2.2.16.2.1.2

atmVclToMulticastMapMulticastAddress

Multicast IP address contained in the MPEG2 video stream.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.5504.4.2.2.16.2.1.3

atmVclToMulticastMapIfIndex

The ifIndex value of the ATM interface for the Vcl
carrying a video stream.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.5504.4.2.2.16.2.1.4

atmVclToMulticastMapVpi

The VPI value of the ATM interface for the Vcl
carrying a video stream.

ATM-TC-MIBAtmVpIdentifierr/w

Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32

Type Constraints:
range: 0..4095

.1.3.6.1.4.1.5504.4.2.2.16.2.1.5

atmVclToMulticastMapVci

The VCI value of the ATM interface for the Vcl
carrying a video stream.

ATM-TC-MIBAtmVcIdentifierr/w

Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.5504.4.2.2.16.2.1.6

atmVclToMulticastMapRowStatus

Row status of the multicast address to Vcl table entry.
This object must be initially set to 'createAndGo'.

Zhone-TCZhoneRowStatusr/w

Textual Convention: Zhone-TCZhoneRowStatus Enumeration

Type Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.5504.4.2.2.16.2.1.7

zhoneAtmPonExtTable

table deprecated

.1.3.6.1.4.1.5504.4.2.2.17 · 1 row entry · 1 columns

Open in standard view

This is the Zhone extension to the Atm Vcl Table (rfc2515.)
It contains APON-related objects.

zhoneAtmPonExtEntry entry .1.3.6.1.4.1.5504.4.2.2.17.1

This is an entry in the Atm PON Extension table.

Indexes

No indexes recorded

Column	Syntax	OID
zhoneAtmVclPonTrafficContainerIndex deprecated This field is an index into the ATM PON Traffic Container table. It associated a Vcl with a Traffic Container, and is used to retrieve PON channel provisioning information.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.5504.4.2.2.17.1.1`

zhoneAtmVplPonExtTable

table deprecated

.1.3.6.1.4.1.5504.4.2.2.18 · 1 row entry · 1 columns

Open in standard view

This is the Zhone extension to the Atm Vpl Table (rfc2515.)
It contains APON-related objects.

zhoneAtmVplPonExtEntry entry .1.3.6.1.4.1.5504.4.2.2.18.1

This is an entry in the Atm PON Extension table.

Indexes

No indexes recorded

Column	Syntax	OID
zhoneAtmVplPonTrafficContainerIndex deprecated This field is an index into the ATM PON Traffic Container table. It associated a Vpl with a Traffic Container, and is used to retrieve PON channel provisioning information.	Integer32r/w Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.5504.4.2.2.18.1.1`

zhoneAtmInterfaceTcExtTable

table

.1.3.6.1.4.1.5504.4.2.2.19 · 1 row entry · 5 columns

Open in standard view

This table contains ATM interface TC
Sublayer parameters and state variables,
one entry per ATM interface port.

zhoneAtmInterfaceTcExtEntry entry .1.3.6.1.4.1.5504.4.2.2.19.1

This list contains TC Sublayer parameters
and state variables at the ATM interface and is
indexed by the ifIndex value of the ATM interface.

Indexes

No indexes recorded

Column	Syntax	OID
zhoneAtmInterfaceNCDEvents The number of times the Near-end No Cell Delineation (NCD) events occur.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.5504.4.2.2.19.1.1`
zhoneAtmInterfaceHECEvents The number of times Near-end Header Error Control (HEC) violations occur.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.5504.4.2.2.19.1.2`
zhoneAtmInterfaceFeOCDEvents The number of times Far-end Out of Cell Delineation (OCD) events occur.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.5504.4.2.2.19.1.3`
zhoneAtmInterfaceFeNCDEvents The number of times Far-end No Cell Delineation (NCD) events occur.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.5504.4.2.2.19.1.4`
zhoneAtmInterfaceFeHECEvents The number of times Far-end Header Error Control (HEC) violations occur.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.5504.4.2.2.19.1.5`

zhoneAtmVcCrossConnectExtTable

table

.1.3.6.1.4.1.5504.4.2.2.20 · 1 row entry · 1 columns

Open in standard view

This Table contains Atm Vc Cross Connect Extensions 
to the atmVcCrossConnectEntry.

zhoneAtmVcCrossConnectExtEntry entry .1.3.6.1.4.1.5504.4.2.2.20.1

This list contains Atm Vc Cross Connect Extensions
to the atmVcCrossConnectEntry.

Indexes

No indexes recorded

Column	Syntax	OID
zhoneAtmVcCrossConnectExtHandleId An administratively-assigned name for the Atm Vc Cross Connect indicated by the INDEX value.	OctetStringr/w Constraints: `range: 1-16`	`.1.3.6.1.4.1.5504.4.2.2.20.1.1`