XEROX-JOB-MONITORING-MIB Table View

A table of general counters and capabilities for ease of use
of the XCMI Job Monitoring MIB on this host system.
          
Usage:  The ONLY valid row in the 'xcmJobMonBaseTable'
shall ALWAYS have an 'xcmJobMonBaseIndex' of one ('1').

A table of general mandatory job information per (logical or
physical) device that is independent of the type of device
(printer, scanner, fax, ...) and that does not require a
spooling implementation (though a spooling implementation shall
also implement this group, in which case spooled jobs shall also
appear in the job table).
          
Job information applies to the job as a whole or to all its
documents.  The specification for most objects is taken
directly from the ISO 10175 Document Printing Application (DPA)
standard clause 9.2, Job Attributes.  However, this MIB is
intended to be used with non-DPA implementations, so only a
small set of general DPA attributes have been included here.

This table contains the hrDeviceIndex values and states of the
device(s) to which this job has been assigned, if the job has
been assigned to a physical device by the job service provider.
If the job service provider has not (yet) assigned the job to a
device, there shall not be any rows in this table for the job.
Some implementations assign jobs to physical devices when the
job is submitted which is called early binding.  Other
implementations delay assigning jobs to physical devices until
the physical device is ready to accept another job which is
called late binding.  Late binding is used when load balancing
between several physical devices.
          
NOTE: Some systems may assign a job to more than one
device and progress part of the job on each.  Therefore, the
device state is represented as a table.  For example, print
systems that only assign a job to a single printer, need only
implement a single row of this table.  As another example,
multifunction devices/systems that scan and print, in
order to implement a copy service may either:
  1. assign a simple job to at least two devices: a scanner and
     a printer or
  2. create a compound job with a single device assigned to each
     contained sub-job.

A table that maps 1) job identifiers generated by the client
that submitted the job to 2) job identifiers generated by the
server that accepted the job.

A table of general job information per (logical or
physical) device that is independent of the type of device and
that does not require a spooling implementation (though a
spooling implementation shall also implement this group, in
which case spooled jobs shall also appear in the job table).
          
Job information applies to the job as a whole or to all its
documents.  The specification for most objects is taken directly
from the ISO 10175 Document Printing Application (DPA) standard
clause 9.2, Job Attributes.    However, this MIB is
intended to be used with non-DPA implementations, so only a
small set of general DPA attributes have been included here.

A table of general mandatory document information that is per
document which in turn is per job and which in turn is per
(logical or physical) device and is independent of the type of
device (printer, scanner, fax, ...) and that does not require a
spooling implementation (though a spooling implementations shall
also implement this group, in which case spooled jobs shall also
appear in the job table).
          
Document information applies to an individual document contained
in a job.  The specification for most objects is taken directly
from the ISO 10175 Document Printing Application (DPA) standard
clause 9.3, Document Attributes.    However, this MIB is
intended to be used with non-DPA implementations, so only a
small set of general DPA attributes have been included here.

A table of print-centric document information which
is per document which in turn is per job and which in turn is
per (logical or physical) printer.  Document information applies
to an individual document contained in the job.  The
specification for most objects is taken directly from the ISO
10175 Document Printing Application (DPA) standard clause 9.3,
Document Attributes and is print-centric.    However, this MIB
is intended to be used with non-DPA implementations, so only a
small set of general DPA attributes have been included here.

A table of general job information per
          
          
(logical or physical) device that is independent of the type of
device (printer, scanner, fax, ...) but does require spooling
of job (and document) instructions, but not necessarily of
document-content data.
          
Job information applies to the job as a whole or to all its
documents.  The specification for most objects is taken directly
from the ISO 10175 Document Printing Application (DPA) standard
clause 9.2, Job Attributes.    However, this MIB is
intended to be used with non-DPA implementations, so only a
small set of general DPA attributes have been included here.

A table of general extended job information per device
that is independent of the type of device but that does require
a spooling implementation.
          
Job information applies to the job as a whole or to all its
documents.  The specification for each object is taken directly
from the ISO 10175 Document Printing Application (DPA) standard
clause 9.2, Job Attributes.    However, this MIB is
intended to be used with non-DPA implementations, so only a
small set of general DPA attributes have been included here.

A table of general job accounting
information per (logical if spooling or physical if not
spooling) device that is independent of the type of device
(printer, scanner, fax, ...).
          
Job information applies to the job as a whole or to all its
documents.  The specification for most objects is taken directly
from the ISO 10175 Document Printing Application (DPA) standard
clause 9.2, Job Attributes.  However, this MIB is
intended to be used with non-DPA implementations, so only a
small set of general DPA attributes have been included here.

This table contains pairs of media indexes and the number of
sheets of that media consumed by this job.

This table contains pairs of colorant indexes and the number
of impressions of that colorant consumed by this job.

This table contains tuples of medium size, count-type,
and the number of impressions counted by count-type on that
medium consumed by this job.