xcmDocType
XEROX-JOB-MONITORING-MIB ·
.1.3.6.1.4.1.253.8.59.12.1.1.5
Object
column
XEROX-JOB-MONITORING-TCXcmJMDocType
ISO DPA: Document-type
This attribute indicates that the document being passed by the
current Print abstract-operation is either a printable
document, a font, or a resource.
How resources are managed during the printing process is
necessarily dependent on the characteristics of the server and
printer implementations. These methods are considered
implementation-specific, and shall not be dictated by ISO/IEC
10175. In particular, ISO/IEC 10175 does not require that
resources be passed in advance of the documents that use them;
i.e., resources may be passed to the server in any order within
the job, subject only to the requirement that the resources be
present at the server before processing begins on the documents
that use them.
Context
- MIB
- XEROX-JOB-MONITORING-MIB
- OID
.1.3.6.1.4.1.253.8.59.12.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- xcmDocGenBasicEntry
- Table
- xcmDocGenBasicTable
- Siblings
- 9
Syntax
XEROX-JOB-MONITORING-TCXcmJMDocType
- Source
- XEROX-JOB-MONITORING-TCXcmJMDocType
- Base type
Enumeration
Values & Constraints
Type Values
1 | other |
2 | unknown |
3 | printable |
4 | font |
5 | resource |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcmDocSequenceNumber For the MIB, a row shall not exist in this table if the job
does not (yet) have any documents. A 32-bit index is required,
since the ISO DPA has a 2**31-1 maximum-value integer f… | column | XEROX-GENERAL-TCOrdinal32 | .1.3.6.1.4.1.253.8.59.12.1.1.1 |
| xcmDocState For the MIB, if the document is being
scanned and printed in the same simple job, the xcmDocState
object represents the state of the document being printed, since
level 1 scan-to-… | column | XEROX-JOB-MONITORING-TCXcmJMDocState | .1.3.6.1.4.1.253.8.59.12.1.1.10 |
| xcmDocName For the MIB, the single xcmDocName object is both the document
name for scan-to-file and the document name for file-to-print.
ISO DPA: Document-nam… | column | XEROX-GENERAL-TCCodeIndexedStringIndex | .1.3.6.1.4.1.253.8.59.12.1.1.2 |
| xcmDocFileName For the MIB, the single xcmDocFileName object is both the
document file name for scan-to-file and the document file name
for file-to-print. If this attribute is specified for a
s… | column | XEROX-GENERAL-TCCodeIndexedStringIndex | .1.3.6.1.4.1.253.8.59.12.1.1.3 |
| xcmDocFileNameType The type of file name syntax from which a document is
obtained for an output job, such as print, or for which a
document is produced for an input job, such as scan-
… | column | XEROX-JOB-MONITORING-TCXcmJMDocFileNameType | .1.3.6.1.4.1.253.8.59.12.1.1.4 |
| xcmDocFormat The interpreter language family enum value registered by IANA
is used according to the Printer MIB (RFC 1759). See
prtInterpreterLangFamily. For the Job Monitoring
MIB, an index… | column | XEROX-PRINTER-EXT-TCXcmPrtInterpreterLangFamily | .1.3.6.1.4.1.253.8.59.12.1.1.6 |
| xcmDocFormatVariants For scan-to-file jobs, the xcmDocFormatVariants object
specifies the document format variant desired as a result of the
scan.
ISO DPA: Document-format-variants
Th… | column | XEROX-GENERAL-TCCodeIndexedStringIndex | .1.3.6.1.4.1.253.8.59.12.1.1.7 |
| xcmDocFormatVersion For scan-to-file jobs, the xcmDocFormatVersion object specifies
the document format version desired as a result of the scan.
ISO DPA: Document-format-version
The … | column | XEROX-GENERAL-TCCodeIndexedStringIndex | .1.3.6.1.4.1.253.8.59.12.1.1.8 |
| xcmDocOctetCount For the MIB, the value of the xcmDocOctetCount is used for both
scan-to-file and file-to-print jobs. In the case of
scan-to-file jobs, the value starts at 0 and counts the number… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.59.12.1.1.9 |