UTS-FAULT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

utActiveAlarmTable

table

.1.3.6.1.4.1.1949.2.3.2.2.4 · 1 row entry · 10 columns

Open in standard view

The content of the active alarm table is not the individual alarms.
Each entry in the table is corresponding to a specific alarm condition
existing at a particular MO instance. That is, alarm OID and originating
MO instance ID (not the module that detects the alarm condition,
but rather the module that is experiencing the reported problem)
together will uniquely identify an entry in the active alarm table.
Multiple alarms for the same fault condition happened at the same
MO instance might be generated by the application that detects
the fault condition, only one entry will be registered in the active alarm table.

utActiveAlarmEntry entry .1.3.6.1.4.1.1949.2.3.2.2.4.1

Indexes

utActiveAlarmEntryID

Column Syntax OID

utActiveAlarmEntryID

to differentiate the entries in the table

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1949.2.3.2.2.4.1.1

utActiveAlarmObjectID

as defined in the MIB with the NOTIFICATION-TYPE macro

ObjectIdentifier

.1.3.6.1.4.1.1949.2.3.2.2.4.1.2

utActiveAlarmSourceMO

from where the alarm is originated

SNMPv2-TCRowPointer

Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier

.1.3.6.1.4.1.1949.2.3.2.2.4.1.3

utActiveAlarmSeqNo

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1949.2.3.2.2.4.1.4

utActiveAlarmFirstDectetTime

when the alarm is initially detected and reported

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.1949.2.3.2.2.4.1.5

utActiveAlarmLastReportTime

when the alarm is last reported

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.1949.2.3.2.2.4.1.6

utActiveAlarmRepeatedNumbers

number of reports for the same alarm from the same alarm source

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1949.2.3.2.2.4.1.7

utActiveAlarmSeverity

reported severity from alarm source

AlarmSeverity

Textual Convention: AlarmSeverity Enumeration

Type Values:

0	alarmLevelClear
1	alarmLevelWarning
2	alarmLevelMinor
3	alarmLevelMajor
4	alarmLevelCritical
5	alarmLevelIndeterminate

.1.3.6.1.4.1.1949.2.3.2.2.4.1.8

utActiveAlarmFirstTrapPDU

a pointer to the first trap pdu(for synchronizing)

OctetString

.1.3.6.1.4.1.1949.2.3.2.2.4.1.9

utActiveAlarmClearingFlag

rowstatus of the table.

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1949.2.3.2.2.4.1.10

utHistoryAlarmTable

table

.1.3.6.1.4.1.1949.2.3.2.2.5 · 1 row entry · 2 columns

Open in standard view

The contents of historical alarm table include all the alarms generated before. If alarm numbers
in the table are up to table dimension, new subsequent alarms will replace the oldest alarms.

only support get operation.

utHistoryAlarmEntry entry .1.3.6.1.4.1.1949.2.3.2.2.5.1

Indexes

utHistoryAlarmSeqNo

Column	Syntax	OID
utHistoryAlarmSeqNo	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1949.2.3.2.2.5.1.1`
utHistoryAlarmTrapPDU	OctetString	`.1.3.6.1.4.1.1949.2.3.2.2.5.1.2`

utHistoryEventTable

table

.1.3.6.1.4.1.1949.2.3.2.2.6 · 1 row entry · 2 columns

Open in standard view

The contents of historical event table include all the events generated before. If event numbers
in the table are up to table dimension, new subsequent events will replace the oldest events.

only support get operation.

utHistoryEventEntry entry .1.3.6.1.4.1.1949.2.3.2.2.6.1

Indexes

utHistoryEventSeqNo

Column	Syntax	OID
utHistoryEventSeqNo	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1949.2.3.2.2.6.1.1`
utHistoryEventTrapPDU	OctetString	`.1.3.6.1.4.1.1949.2.3.2.2.6.1.2`

utAlarmClearActionTable

table

.1.3.6.1.4.1.1949.2.3.2.2.7 · 1 row entry · 4 columns

Open in standard view

The table is used for clearing a specfic alarm in active alarm table.

utAlarmClearActionEntry entry .1.3.6.1.4.1.1949.2.3.2.2.7.1

ACTION_TABLE

Indexes

utAlarmClearActionCmd

Column Syntax OID

utAlarmClearActionCmd

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1949.2.3.2.2.7.1.1

utAlarmClearActionCorrelationNo OctetStringr/w .1.3.6.1.4.1.1949.2.3.2.2.7.1.2

utAlarmClearActionSeqNo

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1949.2.3.2.2.7.1.3

utAlarmClearActionRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1949.2.3.2.2.7.1.4

utFmTrapRcverTable

table

.1.3.6.1.4.1.1949.2.3.2.2.9 · 1 row entry · 3 columns

Open in standard view

utFmTrapRcverEntry entry .1.3.6.1.4.1.1949.2.3.2.2.9.1

Indexes

utFmTrapRcverIP utFmTrapRcverPort

Column Syntax OID

utFmTrapRcverIP

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1949.2.3.2.2.9.1.1

utFmTrapRcverPort

UTS-COMMON-TC-MIBWORD

Textual Convention: UTS-COMMON-TC-MIBWORD Integer32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.1949.2.3.2.2.9.1.2

utFmTrapRcverRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1949.2.3.2.2.9.1.3

utFmAlarmDelayTable

table

.1.3.6.1.4.1.1949.2.3.2.2.10 · 1 row entry · 9 columns

Open in standard view

By adding an alarm delay rule downto an NE, 
a certain alarm can be delayed in agent, before it is sent to OMC. 
An alarm delay rule may include any combination of below conditions

utFmAlarmDelayEntry entry .1.3.6.1.4.1.1949.2.3.2.2.10.1

Indexes

utFmAlarmDelayRuleID

Column Syntax OID

utFmAlarmDelayRuleID

Once a delay rule is set to NE,
the delay rule takes effective immediately.
If the total number of alarm delay rules exceeds 16 on an NE,
the NE should deny any new delay rules.

Unsigned32

Constraints:
range: 1-16

.1.3.6.1.4.1.1949.2.3.2.2.10.1.1

utFmAlarmDelaySeverity

ENUM
Bit mask
alarmLevelClear :Bit(0),
alarmLevelWarning :Bit(1)
alarmLevelMinor :Bit(2)
alarmLevelMajor :Bit(3)
alarmLevelCritical :Bit(4)
default value: 0x11110(30)
DEFAULT:{30}

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1949.2.3.2.2.10.1.2

utFmAlarmDelayType

ENUM
Bit mask
AlarmTypeCommunication:Bit(2)
AlarmTypeEquipment: Bit(3)
AlarmTypeEnvironmental: Bit(4)
AlarmTypeProcessingError: Bit(10)
AlarmTypeQualityOfService: Bit(11)
default value:0x110000011100(3100)
DEFAULT:{3100}

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1949.2.3.2.2.10.1.3

utFmAlarmDelayResourceType

Available values are all potential Entity Types of this NE,
and All.
The default value is All (0).
DEFAULT:{0}

AlarmResourceTyper/w

Textual Convention: AlarmResourceType Enumeration

Type Values:

0	alarmResourceTypeDefault
1	alarmResourceInnerSofModuleComm
2	alarmResourceGenSoftErr
3	alarmResourceInterBoardComm
4	alarmResourcePlatformSoft
5	alarmResourceSoftModule
6	alarmResourceInterSoftModule
7	alarmResourceNeExtComm
21	alarmResourceMtp1Protocol
22	alarmResourceMtp2Protocol
23	alarmResourceMtp3Protocol
24	alarmResourceM3uaProtocol
25	alarmResourceSccpProtocol
26	alarmResourceIsupProtocol
27	alarmResourceRanapProtocol
28	alarmResourceMapBProtocol
29	alarmResourceMapGdProtocol
30	alarmResourceMapCProtocol
31	alarmResourceMapDProtocol
32	alarmResourceMapEProtocol
33	alarmResourceMapGProtocol
34	alarmResourceMapGrProtocol
35	alarmResourceMapGcProtocol
36	alarmResourceMapLhProtocol
37	alarmResourceMapLgProtocol
38	alarmResourceSaalProtocol
39	alarmResourceCapProtocol
40	alarmResourceInapProtcol
41	alarmResourceGtpProtocol
42	alarmResourceMegacoProtocol
43	alarmResourceGmmProtocol
44	alarmResourceBssapProtocol
45	alarmResourceSmProtocol
46	alarmResourceSgsnSmProtocol
47	alarmResourceGiInterface
48	alarmResourceImaProtocol
49	alarmResourceStcProtocol
50	alarmResourceAlCapProtocol
51	alarmResourceGtpUProtocol
71	alarmResourceMtp3link
72	alarmResourceMtp3linkSet
73	alarmResourceMtp3RouteSet
74	alarmResourceMtp3BLink
75	alarmResourceMtp3BLinkSet
76	alarmResourceMtp3BRouteSet
77	alarmResourceAssociation
78	alarmResourceM3uaPsp
79	alarmResourceM3uaPs
80	alarmResourceTrunk
81	alarmResourceTrunkCircuit
82	alarmResourceH110TimeSlot
83	alarmResourceStmlink
84	alarmResourceIpLink
85	alarmResourceSccopLink
86	alarmResourceAal2Pvc
87	alarmResourceAal5Pvc
111	alarmResourceCdr
112	alarmResourceCell
113	alarmResourceHwRcsource
114	alarmResourceSaFailure
115	alarmResourcePlatformMgmtChannel
116	alarmResourceIpOrMacAddr
117	alarmResourceCpHaControl
118	alarmResourceUsrDialog
119	alarmResourceDbConn
120	alarmResourceAuthentication
121	alarmResourceGmlcRoute
151	alarmResourceTca

.1.3.6.1.4.1.1949.2.3.2.2.10.1.4

utFmAlarmDelayAlarmID

Available values are all potential Alarm ID of this NE,
and All.
The default value is All
DEFAULT:{0.0}

ObjectIdentifierr/w

.1.3.6.1.4.1.1949.2.3.2.2.10.1.5

utFmAlarmDelayBeginTime

Effective Timespan (FromTime and ToTime).
This condition specifies the effective timespan within a day.
FromTime should prior to ToTime.
The timespan cannot stride 00:00AM.
The format of FromTime and ToTime is HH:MM
…

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1949.2.3.2.2.10.1.6

utFmAlarmDelayEndTime

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.1949.2.3.2.2.10.1.7

utFmAlarmDelaySecond

Delay SecondsThe valid value is (0,60*60*24).
In other words, the maximum delay time is 24 hours.

Unsigned32r/w

Constraints:
range: 0-86400

.1.3.6.1.4.1.1949.2.3.2.2.10.1.8

utFmAlarmDelayRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.1949.2.3.2.2.10.1.9

UTS-FAULT-MIB Table View

utAlarmModelTable

utActiveAlarmTable

utHistoryAlarmTable

utHistoryEventTable

utAlarmClearActionTable

utFmTrapRcverTable

utFmAlarmDelayTable