utFmAlarmDelaySecond
UTS-FAULT-MIB ·
.1.3.6.1.4.1.1949.2.3.2.2.10.1.8
Object
column
r/w
Unsigned32
Delay SecondsThe valid value is (0,60*60*24). In other words, the maximum delay time is 24 hours.
Context
- MIB
- UTS-FAULT-MIB
- OID
.1.3.6.1.4.1.1949.2.3.2.2.10.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- utFmAlarmDelayEntry
- Table
- utFmAlarmDelayTable
- Siblings
- 8
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| utFmAlarmDelayRuleID Once a delay rule is set to NE,
the delay rule takes effective immediately.
If the total number of alarm delay rules exceeds 16 on an NE,
the NE should deny any new delay rules. | column | Unsigned32 | .1.3.6.1.4.1.1949.2.3.2.2.10.1.1 |
| utFmAlarmDelaySeverity ENUM
Bit mask
alarmLevelClear :Bit(0),
alarmLevelWarning :Bit(1)
alarmLevelMinor :Bit(2)
alarmLevelMajor :Bit(3)
alarmLevelCritical :Bit(4)
default value: 0x11110(30)
DEFAULT:{30} | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1949.2.3.2.2.10.1.2 |
| utFmAlarmDelayType ENUM
Bit mask
AlarmTypeCommunication:Bit(2)
AlarmTypeEquipment: Bit(3)
AlarmTypeEnvironmental: Bit(4)
AlarmTypeProcessingError: Bit(10)
AlarmTypeQualityOfService: Bit(11)
default … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1949.2.3.2.2.10.1.3 |
| utFmAlarmDelayResourceType Available values are all potential Entity Types of this NE,
and All.
The default value is All (0).
DEFAULT:{0} | column | AlarmResourceType | .1.3.6.1.4.1.1949.2.3.2.2.10.1.4 |
| utFmAlarmDelayAlarmID Available values are all potential Alarm ID of this NE,
and All.
The default value is All
DEFAULT:{0.0} | column | ObjectIdentifier | .1.3.6.1.4.1.1949.2.3.2.2.10.1.5 |
| utFmAlarmDelayBeginTime Effective Timespan (FromTime and ToTime).
This condition specifies the effective timespan within a day.
FromTime should prior to ToTime.
The timespan cannot stride 00:00AM.
The… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1949.2.3.2.2.10.1.6 |
| utFmAlarmDelayEndTime Effective Timespan (FromTime and ToTime).
This condition specifies the effective timespan within a day.
FromTime should prior to ToTime.
The timespan cannot stride 00:00AM.
The… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1949.2.3.2.2.10.1.7 |
| utFmAlarmDelayRowStatus | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.1949.2.3.2.2.10.1.9 |