TED-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
47

tedTable

table
.1.3.6.1.2.1.10.273.1.1 · 1 row entry · 27 columns
Open in standard view 
This table indicates multiple TED information, which has been
supported by RFC 3630 and RFC 5305.
tedEntry entry .1.3.6.1.2.1.10.273.1.1.1
This entry contains TED information commonly utilized in both
MPLS and GMPLS.
Indexes
tedLocalRouterId tedRemoteRouterId tedLinkInformationSource tedLinkIndex
Column Syntax OID
tedLinkInformationSource
This object indicates the source of the information about the
TE link.
Enumeration
Enumerated Values:
0unknown
1locallyConfigured
2ospfv2
3ospfv3
4isis
5other
 .1.3.6.1.2.1.10.273.1.1.1.1
tedLocalRouterId
This object represents the Router ID of the router originating
the LSA. If OSPF is used to advertise LSA, this represents a
Router ID. If IS-IS is used, this represents a System ID.
Otherwise, this represents zero.
TedRouterIdTC
Textual Convention: TedRouterIdTC OctetString
Type Constraints:
range: 0..6
 .1.3.6.1.2.1.10.273.1.1.1.2
tedRemoteRouterId
This object indicates the router at the remote end of the link
from the originating router. If OSPF is used to advertise LSA,
this represents a Link ID in the Link TLV. If IS-IS is used,
this represents a neighbor Sys…
TedRouterIdTC
Textual Convention: TedRouterIdTC OctetString
Type Constraints:
range: 0..6
 .1.3.6.1.2.1.10.273.1.1.1.3
tedLinkIndex
This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If IS-IS is used, this
represents an isisLSPID. Otherwise, this represents a unique
identifier within a node.
TedLinkIndexTC
Textual Convention: TedLinkIndexTC OctetString
Type Constraints:
range: 0..8
 .1.3.6.1.2.1.10.273.1.1.1.4
tedLinkInformationData
If tedLinkInformationSource has the value unknown(0), this
object MUST contain a value of zeroDotZero.

If tedLinkInformationSource has the value locallyConfigured(1),
an implementation can use this object…
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.2.1.10.273.1.1.1.5
tedLinkState
This object represents the actual operational state of this TE
link. For instance, if a row is created in the TED table, but
the actual TE link is not available for some reason (e.g., when
there is not yet a physical l…
Enumeration
Enumerated Values:
0unknown
1up
2down
 .1.3.6.1.2.1.10.273.1.1.1.6
tedAreaId
This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If IS-IS
is used, this represents an area address. Otherwise, this
represents zero.
TedAreaIdTC
Textual Convention: TedAreaIdTC OctetString
Type Constraints:
range: 0..20
 .1.3.6.1.2.1.10.273.1.1.1.7
tedLinkType
This indicates the type of the link, such as point to point or
multi-access.
Enumeration
Enumerated Values:
1pointToPoint
2multiAccess
 .1.3.6.1.2.1.10.273.1.1.1.8
tedTeRouterIdAddrType
This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1), or ipv6(2) are supported.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.2.1.10.273.1.1.1.9
tedTeRouterIdAddr
This object indicates the TE-Router ID.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.10.273.1.1.1.10
tedLinkIdAddrType
This object indicates the address type of the TE Link ID. Only
values unknown(0), ipv4(1), or ipv6(2) are supported.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.2.1.10.273.1.1.1.11
tedLinkIdAddr
This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface
address of the designated router in the case of multi-access
links.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.10.273.1.1.1.12
tedMetric
This indicates the traffic engineering metric value of the TE
link.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.273.1.1.1.13
tedMaxBandwidth
This indicates the maximum bandwidth that can be used on this
link in this direction.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.14
tedMaxReservableBandwidth
This indicates the maximum bandwidth that may be reserved on
this link in this direction.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.15
tedUnreservedBandwidthPri0
This indicates the amount of bandwidth not yet reserved at the
priority 0.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.16
tedUnreservedBandwidthPri1
This indicates the amount of bandwidth not yet reserved at the
priority 1.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.17
tedUnreservedBandwidthPri2
This indicates the amount of bandwidth not yet reserved at the
priority 2.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.18
tedUnreservedBandwidthPri3
This indicates the amount of bandwidth not yet reserved at the
priority 3.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.19
tedUnreservedBandwidthPri4
This indicates the amount of bandwidth not yet reserved at the
priority 4.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.20
tedUnreservedBandwidthPri5
This indicates the amount of bandwidth not yet reserved at the
priority 5.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.21
tedUnreservedBandwidthPri6
This indicates the amount of bandwidth not yet reserved at the
priority 6.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.22
tedUnreservedBandwidthPri7
This indicates the amount of bandwidth not yet reserved at the
priority 7.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.1.1.23
tedAdministrativeGroup
This indicates the Administrative Group to which the link
belongs. Since the value is a bit mask, the link can belong
to multiple groups. This is also called Resource Class/Color.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.273.1.1.1.24
tedLocalId
This indicates the Link Local Identifier of an unnumbered
link.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.273.1.1.1.25
tedRemoteId
This indicates the Link Remote Identifier of an unnumbered
link.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.273.1.1.1.26
tedLinkProtectionType
This object indicates the protection type of the TE link.
Bits
Enumerated Values:
0extraTraffic
1unprotected
2shared
3dedicatedOneToOne
4dedicatedOnePlusOne
5enhanced
 .1.3.6.1.2.1.10.273.1.1.1.27

tedLocalIfAddrTable

table
.1.3.6.1.2.1.10.273.1.2 · 1 row entry · 2 columns
Open in standard view 
This table contains the IP address information of a local TE
link.
tedLocalIfAddrEntry entry .1.3.6.1.2.1.10.273.1.2.1
This entry contains the IP address information of the local TE
link.
Indexes
tedLinkIndex tedLocalIfAddr
Column Syntax OID
tedLocalIfAddrType
This object indicates the address type of the local TE link.
Only values unknown(0), ipv4(1), or ipv6(2) have to be
supported.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.2.1.10.273.1.2.1.1
tedLocalIfAddr
This object indicates the address of the local TE link.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.2.1.10.273.1.2.1.2

tedRemoteIfAddrTable

table
.1.3.6.1.2.1.10.273.1.3 · 1 row entry · 2 columns
Open in standard view 
This table contains the IP address information of a remote TE
link.
tedRemoteIfAddrEntry entry .1.3.6.1.2.1.10.273.1.3.1
This entry contains the IP address information of the remote
TE link.
Indexes
tedLinkIndex tedRemoteIfAddr
Column Syntax OID
tedRemoteIfAddrType
This object indicates the address type of the remote TE link.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.2.1.10.273.1.3.1.1
tedRemoteIfAddr
This object indicates the address of the remote TE link.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.2.1.10.273.1.3.1.2

tedSwCapTable

table
.1.3.6.1.2.1.10.273.1.4 · 1 row entry · 14 columns
Open in standard view 
This table contains the GMPLS TED switching capability
information.
tedSwCapEntry entry .1.3.6.1.2.1.10.273.1.4.1
This entry relates each TE link with its GMPLS TE switching
capability information. If the MIB module deals with only OSPF-
TE information, the value of each object related with GMPLS TE
extensions should be null.
Indexes
tedLinkIndex tedSwCapIndex
Column Syntax OID
tedSwCapIndex
This index is utilized to identify multiple switching
functions on a local or remote TE link according to definitions
of textual conventions of GMPLS, RFC 4801.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.2.1.10.273.1.4.1.1
tedSwCapType
This object indicates the GMPLS switching capability assigned
to the TE link according to definitions of textual conventions
of GMPLS, RFC 4801.
IANA-GMPLS-TC-MIBIANAGmplsSwitchingTypeTC
Textual Convention: IANA-GMPLS-TC-MIBIANAGmplsSwitchingTypeTC Enumeration
Type Values:
0unknown
1psc1
2psc2
3psc3
4psc4
30evpl
40pbb
51l2sc
100tdm
110otntdm
125dcsc
150lsc
151wsonlsc
200fsc
 .1.3.6.1.2.1.10.273.1.4.1.2
tedSwCapEncoding
This object indicates the GMPLS encoding type assigned to the
TE link.
IANA-GMPLS-TC-MIBIANAGmplsLSPEncodingTypeTC
Textual Convention: IANA-GMPLS-TC-MIBIANAGmplsLSPEncodingTypeTC Enumeration
Type Values:
0tunnelLspNotGmpls
1tunnelLspPacket
2tunnelLspEthernet
3tunnelLspAnsiEtsiPdh
5tunnelLspSdhSonet
7tunnelLspDigitalWrapper
8tunnelLspLambda
9tunnelLspFiber
11tunnelLspFiberChannel
12tunnelDigitalPath
13tunnelOpticalChannel
14tunnelLine
 .1.3.6.1.2.1.10.273.1.4.1.3
tedSwCapMaxLspBandwidthPri0
This object indicates the maximum bandwidth of the TE link at
the priority 0 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.4
tedSwCapMaxLspBandwidthPri1
This object indicates the maximum bandwidth of the TE link at
the priority 1 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.5
tedSwCapMaxLspBandwidthPri2
This object indicates the maximum bandwidth of the TE link at
the priority 2 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.6
tedSwCapMaxLspBandwidthPri3
This object indicates the maximum bandwidth of the TE link at
the priority 3 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.7
tedSwCapMaxLspBandwidthPri4
This object indicates the maximum bandwidth of the TE link at
the priority 4 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.8
tedSwCapMaxLspBandwidthPri5
This object indicates the maximum bandwidth of the TE link at
the priority 5 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.9
tedSwCapMaxLspBandwidthPri6
This object indicates the maximum bandwidth of the TE link at
the priority 6 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.10
tedSwCapMaxLspBandwidthPri7
This object indicates the maximum bandwidth of the TE link at
the priority 7 for GMPLS LSP creation.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.11
tedSwCapMinLspBandwidth
This object indicates the minimum bandwidth of the TE link for
GMPLS LSP creation if the switching capability field is TDM,
PSC-1, PSC-2, PSC-3, or PSC-4.
Byte per secondFLOAT-TC-MIBFloat32TC
Textual Convention: FLOAT-TC-MIBFloat32TC OctetString
Type Constraints:
range: 4
 .1.3.6.1.2.1.10.273.1.4.1.12
tedSwCapIfMtu
This object indicates the MTU of the local or remote TE link.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.273.1.4.1.13
tedSwCapIndication
This object indicates whether the interface supports Standard
or Arbitrary SONET/SDH.
Enumeration
Enumerated Values:
0standard
1arbitrary
 .1.3.6.1.2.1.10.273.1.4.1.14

tedSrlgTable

table
.1.3.6.1.2.1.10.273.1.5 · 1 row entry · 2 columns
Open in standard view 
This table contains the SRLG information of the TE link.
tedSrlgEntry entry .1.3.6.1.2.1.10.273.1.5.1
This entry relates each TE link with its SRLG information.
Indexes
tedLinkIndex tedSrlgIndex
Column Syntax OID
tedSrlgIndex
This index is utilized to identify multiple SRLG values on a
local or remote TE link. This object represents an arbitrary
value, which is locally defined in a router.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.2.1.10.273.1.5.1.1
tedSrlg
This object indicates the SRLG value assigned to a local or
remote TE link.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.2.1.10.273.1.5.1.2