tedLinkState
TED-MIB ·
.1.3.6.1.2.1.10.273.1.1.1.6
Object
column
Enumeration
This object represents the actual operational state of this TE link. For instance, if a row is created in the TED table, but the actual TE link is not available for some reason (e.g., when there is not yet a physical link or the link has been manually disabled), then the object would be down(2) state. In contrast, if a row is added and the TE link is available, this would be operationally up(1).
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | up |
2 | down |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tedLinkInformationSource This object indicates the source of the information about the
TE link. | column | Enumeration | .1.3.6.1.2.1.10.273.1.1.1.1 |
| tedTeRouterIdAddr This object indicates the TE-Router ID. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.273.1.1.1.10 |
| tedLinkIdAddrType This object indicates the address type of the TE Link ID. Only
values unknown(0), ipv4(1), or ipv6(2) are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.273.1.1.1.11 |
| tedLinkIdAddr This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface
address of the designated router in the case of multi-access
l… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.273.1.1.1.12 |
| tedMetric This indicates the traffic engineering metric value of the TE
link. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.10.273.1.1.1.13 |
| tedMaxBandwidth This indicates the maximum bandwidth that can be used on this
link in this direction. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.14 |
| tedMaxReservableBandwidth This indicates the maximum bandwidth that may be reserved on
this link in this direction. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.15 |
| tedUnreservedBandwidthPri0 This indicates the amount of bandwidth not yet reserved at the
priority 0. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.16 |
| tedUnreservedBandwidthPri1 This indicates the amount of bandwidth not yet reserved at the
priority 1. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.17 |
| tedUnreservedBandwidthPri2 This indicates the amount of bandwidth not yet reserved at the
priority 2. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.18 |
| tedUnreservedBandwidthPri3 This indicates the amount of bandwidth not yet reserved at the
priority 3. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.19 |
| tedLocalRouterId This object represents the Router ID of the router originating
the LSA. If OSPF is used to advertise LSA, this represents a
Router ID. If IS-IS is used, this represents a System… | column | TedRouterIdTC | .1.3.6.1.2.1.10.273.1.1.1.2 |
| tedUnreservedBandwidthPri4 This indicates the amount of bandwidth not yet reserved at the
priority 4. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.20 |
| tedUnreservedBandwidthPri5 This indicates the amount of bandwidth not yet reserved at the
priority 5. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.21 |
| tedUnreservedBandwidthPri6 This indicates the amount of bandwidth not yet reserved at the
priority 6. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.22 |
| tedUnreservedBandwidthPri7 This indicates the amount of bandwidth not yet reserved at the
priority 7. | column | Byte per second FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.10.273.1.1.1.23 |
| tedAdministrativeGroup This indicates the Administrative Group to which the link
belongs. Since the value is a bit mask, the link can belong
to multiple groups. This is also called Resource Class/Colo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.10.273.1.1.1.24 |
| tedLocalId This indicates the Link Local Identifier of an unnumbered
link. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.10.273.1.1.1.25 |
| tedRemoteId This indicates the Link Remote Identifier of an unnumbered
link. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.10.273.1.1.1.26 |
| tedLinkProtectionType This object indicates the protection type of the TE link. | column | Bits | .1.3.6.1.2.1.10.273.1.1.1.27 |
| tedRemoteRouterId This object indicates the router at the remote end of the link
from the originating router. If OSPF is used to advertise LSA,
this represents a Link ID in the Link TLV. If IS-IS… | column | TedRouterIdTC | .1.3.6.1.2.1.10.273.1.1.1.3 |
| tedLinkIndex This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If IS-IS is used, this
represents an isisLSPID. Otherwise, this represents a un… | column | TedLinkIndexTC | .1.3.6.1.2.1.10.273.1.1.1.4 |
| tedLinkInformationData If tedLinkInformationSource has the value unknown(0), this
object MUST contain a value of zeroDotZero.
If tedLinkInformationSource has the value locallyConfigured(1… | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.10.273.1.1.1.5 |
| tedAreaId This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If IS-IS
is used, this represents an area address. Otherwis… | column | TedAreaIdTC | .1.3.6.1.2.1.10.273.1.1.1.7 |
| tedLinkType This indicates the type of the link, such as point to point or
multi-access. | column | Enumeration | .1.3.6.1.2.1.10.273.1.1.1.8 |
| tedTeRouterIdAddrType This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1), or ipv6(2) are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.273.1.1.1.9 |