TE-LINK-STD-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
7
Rows
7
Columns
60
teLinkTable
table.1.3.6.1.2.1.10.200.1.1
·
1 row entry
·
12 columns
This table specifies the grouping of component links into TE links and the grouping of TE links into bundled links.
An entry in this table exists for each ifEntry with an
ifType of teLink(200), i.e., for every TE link. An ifEntry
in the ifTable must exist before a teLinkEntry is created
with the corresponding ifIndex. If a TE link …
ifType of teLink(200), i.e., for every TE link. An ifEntry
in the ifTable must exist before a teLinkEntry is created
with the corresponding ifIndex. If a TE link …
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
teLinkAddressType
The type of Internet address for the TE link.
|
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.1.1.1 |
||||||||||||||
|
teLinkLocalIpAddr
The local Internet address for numbered links. The type of
this address is determined by the value of the teLinkAddressType object. For IPv4 and IPv6 numbered links, this object represents the local IP a… |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.2.1.10.200.1.1.1.2 |
||||||||||||||
|
teLinkRemoteIpAddr
The remote Internet address for numbered links. The type of
this address is determined by the value of the teLinkAddressType object. The remote IP address associated with the TE link (IPv4 and IPv6 numbe… |
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.2.1.10.200.1.1.1.3 |
||||||||||||||
|
teLinkMetric
The traffic engineering metric for the TE link is
derived from its component links. All component links within the TE link must have the same traffic engineering metric. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.10.200.1.1.1.4 |
||||||||||||||
|
teLinkMaximumReservableBandwidth
This attribute specifies the maximum reservable bandwidth on
the TE link. This is the union of the maximum reservable bandwidth of all the component links within the TE link that can be used to carry live traffic. |
bpsTeLinkBandwidth Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.1.1.5 |
||||||||||||||
|
teLinkProtectionType
This attribute specifies the link protection type of the
TE link. Descriptions of the different protection types can be found in the 'Routing Extensions in Support of Generalized Multi-Protocol Label Switching (GMPLS)'… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.2.1.10.200.1.1.1.6 |
||||||||||||||
|
teLinkWorkingPriority
This object represents a priority value such that a new
connection with a higher priority, i.e., numerically lower than this value, is guaranteed to be setup on a primary link and not on a secondary link. |
TeLinkPriorityr/w Textual Convention: TeLinkPriority Unsigned32Type Constraints: range: 0..7 |
.1.3.6.1.2.1.10.200.1.1.1.7 |
||||||||||||||
|
teLinkResourceClass
This attribute specifies the TE link resource class.
The resource class is a 32 bit bitfield. The resource class for a link bundle is derived from the resource class of its TE links. All TE links within… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.2.1.10.200.1.1.1.8 |
||||||||||||||
|
teLinkIncomingIfId
For unnumbered links, the incoming interface is set to the
outgoing interface identifier chosen by the neighboring LSR for the reverse link corresponding to this TE link. If the link is numbered, the value of this obje… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.2.1.10.200.1.1.1.9 |
||||||||||||||
|
teLinkOutgoingIfId
If the link is unnumbered, the outgoing interface identifier
is set to the outgoing interface identifier chosen for the TE link by the advertising LSR. If the link is numbered, the value of this object is 0 and the add… |
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.2.1.10.200.1.1.1.10 |
||||||||||||||
|
teLinkRowStatus
This variable is used to create, modify, and/or
delete a row in this table. None of the writable objects in a row can be changed if status is active(1). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.1.1.11 |
||||||||||||||
|
teLinkStorageType
The storage type for this conceptual row in the
teLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.1.1.12 |
teLinkDescriptorTable
table.1.3.6.1.2.1.10.200.1.2
·
1 row entry
·
16 columns
This table specifies the interface switching capability descriptors associated with the TE links.
An entry in this table is created for every TE link interface
switching capability descriptor. An ifEntry in the ifTable
must exist before a teLinkDescriptorEntry using the same
ifIndex is created. ifType of ifEntry m…
switching capability descriptor. An ifEntry in the ifTable
must exist before a teLinkDescriptorEntry using the same
ifIndex is created. ifType of ifEntry m…
Indexes
IF-MIBifIndex teLinkDescriptorId
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
teLinkDescriptorId
This object specifies the link descriptor identifier.
|
Unsigned32 Constraints: range: 1-4294967295 |
.1.3.6.1.2.1.10.200.1.2.1.1 |
||||||||||||||||
|
teLinkDescrSwitchingCapability
This attribute specifies interface switching capability of
the TE link, which is derived from its component links. |
TeLinkSwitchingCapabilityr/w Textual Convention: TeLinkSwitchingCapability EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.2.1.2 |
||||||||||||||||
|
teLinkDescrEncodingType
This attribute specifies the TE link encoding type.
|
TeLinkEncodingTyper/w Textual Convention: TeLinkEncodingType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.2.1.3 |
||||||||||||||||
|
teLinkDescrMinLspBandwidth
This attribute specifies the minimum LSP bandwidth on
the TE link. This is derived from the union of the minimum LSP bandwidth of all the component links associated with the TE link that can be used to carry live traff… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.4 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio0
This attribute specifies the maximum LSP bandwidth at
priority 0 on the TE link. This is the union of the maximum LSP bandwidth at priority 0 of all the component links within the TE link that can be used to carry live… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.5 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio1
This attribute specifies the maximum LSP bandwidth at
priority 1 on the TE link. This is the union of the maximum LSP bandwidth at priority 1 of all the component links within the TE link that can be used to carry live… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.6 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio2
This attribute specifies the maximum LSP bandwidth at
priority 2 on the TE link. This is the union of the maximum LSP bandwidth at priority 2 of all the component links within the TE link that can be use… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.7 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio3
This attribute specifies the maximum LSP bandwidth at
priority 3 on the TE link. This is the union of the maximum LSP bandwidth at priority 3 of all the component links within the TE link that can be used to carry live… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.8 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio4
This attribute specifies the maximum LSP bandwidth at
priority 4 on the TE link. This is the union of the maximum LSP bandwidth at priority 4 of all the component links within the TE link that can be used to carry live… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.9 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio5
This attribute specifies the maximum LSP bandwidth at
priority 5 on the TE link. This is the union of the maximum LSP bandwidth at priority 5 of all the component links within the TE link that can be used to carry live… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.10 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio6
This attribute specifies the maximum LSP bandwidth at
priority 6 on the TE link. This is the union of the maximum LSP bandwidth at priority 6 of all the component links within the TE link that can be used to carry live… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.11 |
||||||||||||||||
|
teLinkDescrMaxLspBandwidthPrio7
This attribute specifies the maximum LSP bandwidth at
priority 7 on the TE link. This is the union of the maximum LSP bandwidth at priority 7 of all the component links within the TE link that can be used to carry live… |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.2.1.12 |
||||||||||||||||
|
teLinkDescrInterfaceMtu
This attribute specifies the interface MTU for the TE
link descriptor. |
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.2.1.10.200.1.2.1.13 |
||||||||||||||||
|
teLinkDescrIndication
This attribute specifies whether this interface supports
Standard or Arbitrary SONET/SDH. |
TeLinkSonetSdhIndicationr/w Textual Convention: TeLinkSonetSdhIndication EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.2.1.14 |
||||||||||||||||
|
teLinkDescrRowStatus
This variable is used to create, modify, and/or
delete a row in this table. No read-create object can be changed if teLinkDescrRowStatus is in the active(1) state. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.2.1.15 |
||||||||||||||||
|
teLinkDescrStorageType
The storage type for this conceptual row in the
teLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.2.1.16 |
teLinkSrlgTable
table.1.3.6.1.2.1.10.200.1.3
·
1 row entry
·
3 columns
This table specifies the SRLGs associated with TE links.
An entry in this table contains information about an
SRLG associated with a TE link.
An ifEntry in the ifTable must exist before a
teLinkSrlgEntry using the same ifIndex is created.
The ifType of ifEntry must be teLink(…
SRLG associated with a TE link.
An ifEntry in the ifTable must exist before a
teLinkSrlgEntry using the same ifIndex is created.
The ifType of ifEntry must be teLink(…
Indexes
IF-MIBifIndex teLinkSrlg
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
teLinkSrlg
This identifies an SRLG supported by the TE link. An SRLG is
identified with a 32-bit number that is unique within an IGP domain. Zero is a valid SRLG number. |
Unsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.2.1.10.200.1.3.1.1 |
||||||||||||
|
teLinkSrlgRowStatus
This variable is used to create, modify, and/or
delete a row in this table. No read-create object can be modified if teLinkSrlgRowStatus is active(1). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.3.1.2 |
||||||||||||
|
teLinkSrlgStorageType
The storage type for this conceptual row in the
teLinkSrlgTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.3.1.3 |
teLinkBandwidthTable
table.1.3.6.1.2.1.10.200.1.4
·
1 row entry
·
4 columns
This table specifies the priority-based bandwidth table for TE links.
An entry in this table contains information about
the priority-based bandwidth of TE links. An ifEntry in the
ifTable must exist before a teLinkBandwidthEntry using the
same ifIndex is created. The ifType of ifEntry m…
the priority-based bandwidth of TE links. An ifEntry in the
ifTable must exist before a teLinkBandwidthEntry using the
same ifIndex is created. The ifType of ifEntry m…
Indexes
IF-MIBifIndex teLinkBandwidthPriority
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
teLinkBandwidthPriority
This attribute specifies the priority. A value of 0 is valid
as specified in the 'Traffic Engineering (TE) Extensions to OSPF Version 2' document. |
TeLinkPriority Textual Convention: TeLinkPriority Unsigned32Type Constraints: range: 0..7 |
.1.3.6.1.2.1.10.200.1.4.1.1 |
||||||||||||
|
teLinkBandwidthUnreserved
This attribute specifies the TE link unreserved
bandwidth at priority p. It is the sum of the unreserved bandwidths at priority p of all component links associated with the TE link (excluding all links that are strictl… |
bpsTeLinkBandwidth Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.4.1.2 |
||||||||||||
|
teLinkBandwidthRowStatus
This variable is used to create, modify, and/or
delete a row in this table. No read-create object can be modified when teLinkBandwidthRowStatus is active(1). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.4.1.3 |
||||||||||||
|
teLinkBandwidthStorageType
The storage type for this conceptual row in the
teLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.4.1.4 |
componentLinkTable
table.1.3.6.1.2.1.10.200.1.5
·
1 row entry
·
5 columns
This table specifies the component link parameters.
An entry in this table exists for each ifEntry that
represents a component link. An ifEntry must exist in
the ifTable before a componentLinkEntry is created with
the corresponding ifIndex. ifEntry's ifType can be
of a…
represents a component link. An ifEntry must exist in
the ifTable before a componentLinkEntry is created with
the corresponding ifIndex. ifEntry's ifType can be
of a…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
componentLinkMaxResBandwidth
This attribute specifies the maximum reservable bandwidth on
the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.5.1.1 |
||||||||||||
|
componentLinkPreferredProtection
This attribute specifies whether this component link is
a primary or secondary entity. |
TeLinkProtectionr/w Textual Convention: TeLinkProtection EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.5.1.2 |
||||||||||||
|
componentLinkCurrentProtection
This attribute specifies whether this component link is
currently used as primary or secondary link. |
TeLinkProtection Textual Convention: TeLinkProtection EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.5.1.3 |
||||||||||||
|
componentLinkRowStatus
This variable is used to create, modify, and/or
delete a row in this table. No read-create object can be modified when componentLinkRowStatus is active(1). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.5.1.4 |
||||||||||||
|
componentLinkStorageType
The storage type for this conceptual row in the
componentLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.5.1.5 |
.1.3.6.1.2.1.10.200.1.6
·
1 row entry
·
16 columns
This table specifies the interface switching capability descriptors associated with the component links.
An entry in this table is created for every component link
descriptor. An ifEntry in the ifTable must exist before a
componentLinkDescriptorEntry using the same ifIndex is
created. ifEntry's ifType can be of any inter…
descriptor. An ifEntry in the ifTable must exist before a
componentLinkDescriptorEntry using the same ifIndex is
created. ifEntry's ifType can be of any inter…
Indexes
IF-MIBifIndex componentLinkDescrId
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
componentLinkDescrId
This object specifies the link descriptor identifier.
|
Unsigned32 Constraints: range: 1-4294967295 |
.1.3.6.1.2.1.10.200.1.6.1.1 |
||||||||||||||||
|
componentLinkDescrSwitchingCapability
This attribute specifies link multiplexing capabilities of
the component link. |
TeLinkSwitchingCapabilityr/w Textual Convention: TeLinkSwitchingCapability EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.6.1.2 |
||||||||||||||||
|
componentLinkDescrEncodingType
This attribute specifies the component link encoding type.
|
TeLinkEncodingTyper/w Textual Convention: TeLinkEncodingType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.6.1.3 |
||||||||||||||||
|
componentLinkDescrMinLspBandwidth
This attribute specifies the minimum LSP bandwidth on
the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.4 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio0
This attribute specifies the maximum LSP bandwidth at
priority 0 on the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.5 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio1
This attribute specifies the maximum LSP bandwidth at
priority 1 on the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.6 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio2
This attribute specifies the maximum LSP bandwidth at
priority 2 on the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.7 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio3
This attribute specifies the maximum LSP bandwidth at
priority 3 on the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.8 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio4
This attribute specifies the maximum LSP bandwidth at
priority 4 on the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.9 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio5
This attribute specifies the maximum LSP bandwidth at
priority 5 on the component link. |
thousand bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.10 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio6
This attribute specifies the maximum LSP bandwidth at
priority 6 on the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.11 |
||||||||||||||||
|
componentLinkDescrMaxLspBandwidthPrio7
This attribute specifies the maximum LSP bandwidth at
priority 7 on the component link. |
bpsTeLinkBandwidthr/w Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.6.1.12 |
||||||||||||||||
|
componentLinkDescrInterfaceMtu
This attribute specifies the interface MTU for the component
link descriptor. |
Unsigned32r/w Constraints: range: 1-65535 |
.1.3.6.1.2.1.10.200.1.6.1.13 |
||||||||||||||||
|
componentLinkDescrIndication
This attribute specifies whether this interface supports
Standard or Arbitrary SONET/SDH. |
TeLinkSonetSdhIndicationr/w Textual Convention: TeLinkSonetSdhIndication EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.6.1.14 |
||||||||||||||||
|
componentLinkDescrRowStatus
This variable is used to create, modify, and/or
delete a row in this table. No read-create object can be modified when componentLinkDescrRowStatus is active(1). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.6.1.15 |
||||||||||||||||
|
componentLinkDescrStorageType
The storage type for this conceptual row in the
componentLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.6.1.16 |
.1.3.6.1.2.1.10.200.1.7
·
1 row entry
·
4 columns
This table specifies the priority-based bandwidth for component links.
An entry in this table contains information about
the priority-based bandwidth on component links.
An ifEntry in the ifTable must exist before a
componentLinkBandwidthEntry using the same ifIndex is
created. ifEntry's …
the priority-based bandwidth on component links.
An ifEntry in the ifTable must exist before a
componentLinkBandwidthEntry using the same ifIndex is
created. ifEntry's …
Indexes
IF-MIBifIndex componentLinkBandwidthPriority
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
componentLinkBandwidthPriority
This attribute specifies the priority. A value of 0 is valid
as specified in the 'Traffic Engineering (TE) Extensions to OSPF Version 2' document. |
TeLinkPriority Textual Convention: TeLinkPriority Unsigned32Type Constraints: range: 0..7 |
.1.3.6.1.2.1.10.200.1.7.1.1 |
||||||||||||
|
componentLinkBandwidthUnreserved
This attribute specifies the component link unreserved
bandwidth at priority p. |
bpsTeLinkBandwidth Textual Convention: TeLinkBandwidth OctetStringType Constraints: range: 4 |
.1.3.6.1.2.1.10.200.1.7.1.2 |
||||||||||||
|
componentLinkBandwidthRowStatus
This variable is used to create, modify, and/or
delete a row in this table. No read-create object can be modified when componentLinkBandwidthRowStatus is active(1). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.7.1.3 |
||||||||||||
|
componentLinkBandwidthStorageType
The storage type for this conceptual row in the
componentLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. |
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.2.1.10.200.1.7.1.4 |