teLinkWorkingPriority
TE-LINK-STD-MIB ·
.1.3.6.1.2.1.10.200.1.1.1.7
Object
column
r/w
TeLinkPriority
This object represents a priority value such that a new connection with a higher priority, i.e., numerically lower than this value, is guaranteed to be setup on a primary link and not on a secondary link.
Context
- MIB
- TE-LINK-STD-MIB
- OID
.1.3.6.1.2.1.10.200.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- teLinkEntry
- Table
- teLinkTable
- Siblings
- 11
Syntax
TeLinkPriority
- Source
- TeLinkPriority
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| teLinkAddressType The type of Internet address for the TE link. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.200.1.1.1.1 |
| teLinkOutgoingIfId If the link is unnumbered, the outgoing interface identifier
is set to the outgoing interface identifier chosen for the
TE link by the advertising LSR. If the link is numbered, t… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.200.1.1.1.10 |
| teLinkRowStatus This variable is used to create, modify, and/or
delete a row in this table. None of the writable objects in
a row can be changed if status is active(1). | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.200.1.1.1.11 |
| teLinkStorageType The storage type for this conceptual row in the
teLinkTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.200.1.1.1.12 |
| teLinkLocalIpAddr The local Internet address for numbered links. The type of
this address is determined by the value of the
teLinkAddressType object.
For IPv4 and IPv6 numbered link… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.200.1.1.1.2 |
| teLinkRemoteIpAddr The remote Internet address for numbered links. The type of
this address is determined by the value of the
teLinkAddressType object.
The remote IP address associat… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.200.1.1.1.3 |
| teLinkMetric The traffic engineering metric for the TE link is
derived from its component links. All component links
within the TE link must have the same traffic
engineering metric. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.200.1.1.1.4 |
| teLinkMaximumReservableBandwidth This attribute specifies the maximum reservable bandwidth on
the TE link. This is the union of the maximum reservable
bandwidth of all the component links within the
TE link that… | column | bps TeLinkBandwidth | .1.3.6.1.2.1.10.200.1.1.1.5 |
| teLinkProtectionType This attribute specifies the link protection type of the
TE link. Descriptions of the different protection types can
be found in the 'Routing Extensions in Support of
Generalized… | column | Enumeration | .1.3.6.1.2.1.10.200.1.1.1.6 |
| teLinkResourceClass This attribute specifies the TE link resource class.
The resource class is a 32 bit bitfield. The resource class
for a link bundle is derived from the resource class of its
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.200.1.1.1.8 |
| teLinkIncomingIfId For unnumbered links, the incoming interface is set to the
outgoing interface identifier chosen by the neighboring LSR
for the reverse link corresponding to this TE link. If the
… | column | Integer32 | .1.3.6.1.2.1.10.200.1.1.1.9 |