SUPERMICRO-MPLS-TE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

fsMplsTunnelTable

table

.1.3.6.1.4.1.10876.101.1.13.12.1.2 · 1 row entry · 19 columns

Open in standard view

The fsMplsTunnelTable is extension of mplsTunnelTable.

fsMplsTunnelEntry entry .1.3.6.1.4.1.10876.101.1.13.12.1.2.1

The fsMplsTunnelTable is extension of mplsTunnelTable.

Indexes

No indexes recorded

Column Syntax OID

fsMplsTunnelType

This object allows the administrator to the tunnel type of a MPLS
tunnel.

The value of bit 0 (mpls) if set indicates that this is a normal
MPLS Tunnel.

The value of bit 1 (mplstp) if set in…

Bitsr/w

Enumerated Values:

0	mpls
1	mplstp
2	gmpls
3	hlsp
4	p2mp

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.1

fsMplsTunnelLSRIdMapInfo

This object indicates whether the Ingress and Egress LSR
ID objects of the tunnel entry to be treated as LSR IDs
or should be treated as an index to the fsMplsTpNodeMapTable.

The value of bit 0 (ingressI…

Bitsr/w

Enumerated Values:

0	ingressId
1	egressId

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.2

fsMplsTunnelMode

This object allows the administrator to configure the mode of
tunnel.

The value unidirectional (0) indicates that the direction of the
tunnel is only single direction.

The value coroutedB…

Enumerationr/w

Enumerated Values:

0	unidirectional
1	coroutedBidirectional
2	associatedBidirectional

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.3

fsMplsTunnelProactiveSessIndex

This object indicates the proactive session index for this tunnel.
When a proactive session to monitor this tunnel is established,
the application updates this object with the session index.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.4

fsMplsTunnelMBBStatus

The administrative Make-Before-Break status for Tunnel.
The value 'enabled' (1) indicates that Tunnel supports
Make-Before-Break capablity.The value 'disabled' (2)
indicates that Tunnel does not support
Make-Before-B…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.5

fsMplsTunnelDisJointType

This object indicates the disjoint type of the protection tunnel
with respect to the working tunnel. It is applicable only for
protection tunnel.

Enumerationr/w

Enumerated Values:

1	srlgDisjoint
2	nodeDisjoint
3	linkDisjoint

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.6

fsMplsTunnelAttPointer

This variable points to a row in the fsTunnelAttributeTable .
This table identifies the attribute of LSP. A value of zeroDotZero
indicates that no Attribute has been associated with this
tunnel yet.

SNMPv2-TCRowPointerr/w

Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.7

fsMplsTunnelEndToEndProtection

This bitmask indicates the level of end to end protection required. A
value of zero (no bits set) indicates that any protection may be
used. The following describes these bitfields:

unprotected
This f…

Bitsr/w

Enumerated Values:

0	unprotected
1	fullReroute
2	rerouteWithoutExtraTraffic
3	dedicatedOneToOne
4	dedicatedUniOnePlusOne
5	dedicatedBiOnePlusOne

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.8

fsMplsTunnelPrConfigOperType

This object is used to indicate the operation type/mode of the tunnel.
If the value is set to 'revertive(1)', the normal traffic shall be
returned to the working LSP has recoverd from the failure. (i.e)
after the est…

Enumerationr/w

Enumerated Values:

1	revertive
2	nonRevertive

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.9

fsMplsTunnelSrlgType

This object indicates shared risk link group value for this tunnel.

Enumerationr/w

Enumerated Values:

1	includeAny
2	includeAll
3	excludeAny

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.10

fsMplsTunnelIfIndex

If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table. Otherwise
this variable should contain the value of zero
indicating that a vali…

IF-MIBInterfaceIndexOrZeror/w

Textual Convention: IF-MIBInterfaceIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.11

fsMplsTunnelInitReOptimize

This object is used to indicate the Reoptimization of the tunnel. When
this object is set true then user has initiated reoptimization. Default
value of this object is FALSE.
A tunnel is defined as being reoptimized when…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.12

fsMplsTunnelIsProtectingLsp

This object specifies whether this LSP is working LSP or protection
LSP. If this object is set to true, it means the LSP is protection LSP.
If this object is set to false, it means the LSP is working LSP.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.13

fsMplsLspTunnelMapIndex

This object is used to indicate the tunnel index of FA LSP to which the
tunnel is stacked. This object is applicable only in the node on which
stacking of FA LSP and E2E LSP occurs

MPLS-TC-STD-MIBMplsTunnelIndex

Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.14

fsMplsLspTunnelMapInstance

This object is used to indicate the tunnel instance of FA LSP to which the
tunnel is stacked. This object is applicable only in the node on which
stacking of FA LSP and E2E LSP occurs

MPLS-TC-STD-MIBMplsTunnelInstanceIndex

Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.15

fsMplsLspTunnelMapIngressLSRId

This object is used to indicate the identity of the Ingress LSR of FA LSP
to which the tunnel is stacked. This object is applicable only in the
node on which stacking of FA LSP and E2E LSP occurs

MPLS-TC-STD-MIBMplsExtendedTunnelId

Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.16

fsMplsLspTunnelMapEgressLSRId

This object is used to indicate the identity of the Egress LSR of FA LSP
to which the tunnel is stacked. This object is applicable only in the
node on which stacking of FA LSP and E2E LSP occurs

MPLS-TC-STD-MIBMplsExtendedTunnelId

Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.17

fsMplsTunnelSynchronizationStatus

Indicates the Synchronization status of the tunnel upon RSVP-TE Graceful
Restart. This object is applicable only for RSVP-TE signalled tunnels.
Following values are possible.
0. Not synchronized.
1. Downstream Synchroni…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.18

fsMplsTunnelOutPathMsgId

Denotes the message id generated for the PATH message which is sent from the
node.
This is used for recovering the state when the node receives
SRefresh RecoveryPath message from the helper.
This is applicable only …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.19

fsMplsTpTunnelTable

table

.1.3.6.1.4.1.10876.101.1.13.12.1.3 · 1 row entry · 2 columns

Open in standard view

This table represents MPLS-TP specific extensions to
mplsTunnelTable.
          
As per MPLS-TP Identifiers draft,  LSP_ID is 
          
Src-Global_Node_ID::Src-Tunnel_Num::Dst-Global_Node_ID::
Dst-Tunnel_Num::LSP_Num 
          
mplsTunnelTable is reused for forming the LSP_ID as follows,
          
Source Tunnel_Num is mapped with mplsTunnelIndex,
Source node identifier is mapped with mplsTunnelIngressLSRId,
Destination node identifier is mapped with mplsTunnelEgressLSRId
LSP_Num is mapped with mplsTunnelInstance.
          
Source Global identifier and Destination Global identifier are
maintained in the fsMplsTpNodeMapTable and 
          
fsMplsTpNodeMapLocalNum is used to create an entry in
mplsTunnelTable.

fsMplsTpTunnelEntry entry .1.3.6.1.4.1.10876.101.1.13.12.1.3.1

An entry in this table represents MPLS-TP
specific tunnel configurations.

Indexes

No indexes recorded

Column	Syntax	OID
fsMplsTpTunnelDestTunnelIndex This object allows the administrator to configure the tunnel index of the reverse tunnel. For co-routed bidirectional tunnel, this object will have the value same as the object mplsTunnelIndex. …	MPLS-TC-STD-MIBMplsTunnelIndexr/w Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex `Unsigned32` Type Constraints: `range: 0..65535`	`.1.3.6.1.4.1.10876.101.1.13.12.1.3.1.1`
fsMplsTpTunnelDestTunnelLspNum This object allows the administrator to configure the tunnel lsp number of the reverse tunnel for a associated bidirectional tunnel. This object helps to associate a forward tunnel with the reverse tunnel…	MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.10876.101.1.13.12.1.3.1.2`

fsTunnelAttributeTable

table

.1.3.6.1.4.1.10876.101.1.13.12.1.5 · 1 row entry · 13 columns

Open in standard view

The fsTunnelAttributeTable allows allows configuration 
of LSP attribute parameters.

fsTunnelAttributeEntry entry .1.3.6.1.4.1.10876.101.1.13.12.1.5.1

An entry in this table represents attribute parameters
to be associated with a LSP.

Indexes

fsTunnelAttributeIndex

Column Syntax OID

fsTunnelAttributeIndex

Unique value that identifies a row in this table.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.1

fsTunnelAttributeName

The canonical name assigned to the LSP attribute entry. This uniquely
identifies the attribute entry.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.2

fsTunnelAttributeSetupPrio

This object indicates the setup priority attribute. There is no default
value for this object. If this object is not configured, then LSP takes
this attribute from mplsTunnelTable.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.3

fsTunnelAttributeHoldingPrio

This object indicates the holding priority attribute. There is no default
value for this object. If this object is not configured, then LSP takes
this attribute from mplsTunnelTable.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.4

fsTunnelAttributeIncludeAnyAffinity

A link satisfies the include-any constraint if and only if the constraint
is zero, or the link and the constraint have a resource class in common.
Valid range is Integer(0..4294967295). There is no default value for thi…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.5

fsTunnelAttributeIncludeAllAffinity

A link satisfies the include-all constraint if and only if the link
contains all of the administrative groups specified in the constraint.
Valid range is Integer(0..4294967295). There is no default value for this
object…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.6

fsTunnelAttributeExcludeAnyAffinity

A link satisfies the exclude-any constraint if and only if the link
contains none of the administrative groups specified in the constraint.
Valid range is Integer(0..4294967295). There is no default value for this
objec…

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.7

fsTunnelAttributeSessionAttributes

This bit mask indicates optional session values for
this LSP. The following describes these bit
fields:

fastReroute This flag indicates that the any lsp hop may
choose to reroute this LSP.This flag permit…

Bitsr/w

Enumerated Values:

0	fastReroute
1	mergingPermitted
2	isPersistent
3	isPinned
4	recordRoute

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.8

fsTunnelAttributeBandwidth

This object indicates the bandwidth attribute. There is no default
value for this object. If this object is not configured, then
LSP takes this attribute from mplsTunnelTable.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.9

fsTunnelAttributeTeClassType

This object represents the Class-Type attribute. There is no default
value for this object. If this object is not configured, then
LSP takes this attribute from the tunnel configuration.

Integer32r/w

Constraints:
range: 0-4

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.10

fsTunnelAttributeSrlgType

This object represents Shared Risk Link Group Value attribute.
There is no default value for this object.
If this object is not configured, then LSP takes this attribute from the
tunnel configuration.

Enumerationr/w

Enumerated Values:

1	includeAny
2	includeAll
3	excludeAny

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.11

fsTunnelAttributeRowStatus

This object is used to create, modify, and/or delete a row in this
table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.12

fsTunnelAttributeMask

This object is used to find the number of Attribute parameters
considered while setting up the path.
If no bits are set, it means no Attribute parameters are
configured

Bitsr/w

Enumerated Values:

0	setupPriority
1	holdingPriority
2	sessionAttribute
3	includeAnyAffinity
4	includeAllAffinity
5	excludeAllAffinity
6	bandwidth
7	classType
8	srlg

.1.3.6.1.4.1.10876.101.1.13.12.1.5.1.13

fsMplsTunnelSrlgTable

table

.1.3.6.1.4.1.10876.101.1.13.12.1.6 · 1 row entry · 2 columns

Open in standard view

The fsMplsTunnelSrlgTable allows the administrator to configure
Shared Risk Link Group Values for tunnels.

fsMplsTunnelSrlgEntry entry .1.3.6.1.4.1.10876.101.1.13.12.1.6.1

An entry in this table represents Shared Risk Link Group Values values
associated with a Tunnel.

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId fsMplsTunnelSrlgNo

Column Syntax OID

fsMplsTunnelSrlgNo

This object identifies an SRLG constraint associated with Tunnel.
An SRLG is identified with a 32-bit number that is unique within an IGP
domain. Zero is a valid SRLG number.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.6.1.1

fsMplsTunnelSrlgRowStatus

This variable is used to create, modify, and/or delete a row in this
table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.10876.101.1.13.12.1.6.1.2

fsTunnelAttributeSrlgTable

table

.1.3.6.1.4.1.10876.101.1.13.12.1.7 · 1 row entry · 2 columns

Open in standard view

The fsTunnelAttributeSrlgTable allows the administrator to configure
Shared Risk Link Group Values for each Attribute List to be 
associated with the Tunnel.

fsTunnelAttributeSrlgEntry entry .1.3.6.1.4.1.10876.101.1.13.12.1.7.1

An entry in this table represents Shared Risk Link Group Values
associated with a attribute list.

Indexes

fsTunnelAttributeIndex fsTunnelAttributeSrlgNo

Column Syntax OID

fsTunnelAttributeSrlgNo

This object identifies an SRLG constraint associated with a Attribute
list. An SRLG is identified with a 32-bit number that is unique within
an IGP domain. Zero is a valid SRLG number.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.10876.101.1.13.12.1.7.1.1

fsTunnelAttributeSrlgRowStatus

This variable is used to create, modify, and/or delete a row in this
table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.10876.101.1.13.12.1.7.1.2

fsMplsTunnelHopTable

table

.1.3.6.1.4.1.10876.101.1.13.12.1.8 · 1 row entry · 1 columns

Open in standard view

The fsMplsTunnelHopTable extends the mplsTunnelHopTable of 
MPLS-TE-STD-MIB. This table has the additional Constraint that needs
to be considered when calculating the path to reach the 
destination.

fsMplsTunnelHopEntry entry .1.3.6.1.4.1.10876.101.1.13.12.1.8.1

An entry in this table represents additions to a tunnel hop defined
in mplsTunnelHopEntry. This entry is valid only at the Ingress of the
tunnel and this table is configured only by the network Administrator.

Indexes

No indexes recorded

Column Syntax OID

fsMplsTunnelHopIncludeAny

If this value is set to true, then this indicates that this hop is
configured as an include any node.
If a hop in the table is
configured as include any, then it overrides the configuration of
mplsTunnelHopInclude ob…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.10876.101.1.13.12.1.8.1.1