fsMplsTunnelIfIndex

SUPERMICRO-MPLS-TE-MIB · .1.3.6.1.4.1.10876.101.1.13.12.1.2.1.11

Object

column r/w IF-MIBInterfaceIndexOrZero

If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table.  Otherwise
this variable should contain the value of zero
indicating that a valid ifIndex was not assigned to
this tunnel interface.

Context

MIB: SUPERMICRO-MPLS-TE-MIB
OID: .1.3.6.1.4.1.10876.101.1.13.12.1.2.1.11
Type: column
Access: readwrite
Status: current
Parent: fsMplsTunnelEntry
Table: fsMplsTunnelTable
Siblings: 18

Syntax

IF-MIBInterfaceIndexOrZero

Source: IF-MIBInterfaceIndexOrZero
Base type: Integer32

Values & Constraints

Type Constraints

range: 0..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsMplsTunnelType This object allows the administrator to the tunnel type of a MPLS tunnel. The value of bit 0 (mpls) if set indicates that this is a normal MPLS Tunnel. …	column	Bits	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.1`
fsMplsTunnelSrlgType This object indicates shared risk link group value for this tunnel.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.10`
fsMplsTunnelInitReOptimize This object is used to indicate the Reoptimization of the tunnel. When this object is set true then user has initiated reoptimization. Default value of this object is FALSE. A tun…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.12`
fsMplsTunnelIsProtectingLsp This object specifies whether this LSP is working LSP or protection LSP. If this object is set to true, it means the LSP is protection LSP. If this object is set to false, it mean…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.13`
fsMplsLspTunnelMapIndex This object is used to indicate the tunnel index of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP and E2E LSP occurs	column	MPLS-TC-STD-MIBMplsTunnelIndex	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.14`
fsMplsLspTunnelMapInstance This object is used to indicate the tunnel instance of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP and E2E LSP oc…	column	MPLS-TC-STD-MIBMplsTunnelInstanceIndex	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.15`
fsMplsLspTunnelMapIngressLSRId This object is used to indicate the identity of the Ingress LSR of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP an…	column	MPLS-TC-STD-MIBMplsExtendedTunnelId	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.16`
fsMplsLspTunnelMapEgressLSRId This object is used to indicate the identity of the Egress LSR of FA LSP to which the tunnel is stacked. This object is applicable only in the node on which stacking of FA LSP and…	column	MPLS-TC-STD-MIBMplsExtendedTunnelId	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.17`
fsMplsTunnelSynchronizationStatus Indicates the Synchronization status of the tunnel upon RSVP-TE Graceful Restart. This object is applicable only for RSVP-TE signalled tunnels. Following values are possible. 0. N…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.18`
fsMplsTunnelOutPathMsgId Denotes the message id generated for the PATH message which is sent from the node. This is used for recovering the state when the node receives SRefresh RecoveryPath message fr…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.19`
fsMplsTunnelLSRIdMapInfo This object indicates whether the Ingress and Egress LSR ID objects of the tunnel entry to be treated as LSR IDs or should be treated as an index to the fsMplsTpNodeMapTable. …	column	Bits	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.2`
fsMplsTunnelMode This object allows the administrator to configure the mode of tunnel. The value unidirectional (0) indicates that the direction of the tunnel is only single direct…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.3`
fsMplsTunnelProactiveSessIndex This object indicates the proactive session index for this tunnel. When a proactive session to monitor this tunnel is established, the application updates this object with the ses…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.4`
fsMplsTunnelMBBStatus The administrative Make-Before-Break status for Tunnel. The value 'enabled' (1) indicates that Tunnel supports Make-Before-Break capablity.The value 'disabled' (2) indicates tha…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.5`
fsMplsTunnelDisJointType This object indicates the disjoint type of the protection tunnel with respect to the working tunnel. It is applicable only for protection tunnel.	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.6`
fsMplsTunnelAttPointer This variable points to a row in the fsTunnelAttributeTable . This table identifies the attribute of LSP. A value of zeroDotZero indicates that no Attribute has been associated wi…	column	SNMPv2-TCRowPointer	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.7`
fsMplsTunnelEndToEndProtection This bitmask indicates the level of end to end protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfie…	column	Bits	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.8`
fsMplsTunnelPrConfigOperType This object is used to indicate the operation type/mode of the tunnel. If the value is set to 'revertive(1)', the normal traffic shall be returned to the working LSP has recover…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.13.12.1.2.1.9`