SL-EDFA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
37

edfaConfigTable

table
.1.3.6.1.4.1.4515.1.9.1.1 · 1 row entry · 37 columns
Open in standard view 
The EDFA configuration table.
edfaConfigEntry entry .1.3.6.1.4.1.4515.1.9.1.1.1
An entry in the EDFA interface configuration table.
The index to this table is the same as the
an ifIndex.
Indexes
edfaIfIndex
Column Syntax OID
edfaIfIndex
The amplifier interface index.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.1
edfaPumpTemp
The pump temperture (in Kelvin).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.2
edfaRxPower
The measured Rx Power.
The value is specified in ten'th of Dbm units increments, starting
from -30.0 dbm (e.g. value 0 means -30.0 dbm).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.3
edfaPumpAdminStatus
The desired state of the laser. The restart(3)
state indicates that the edfa pump should be restarted.
The restart(3) is not a state, thus it is not kept
in the configuration file.
Enumerationr/w
Enumerated Values:
1up
2down
3restart
 .1.3.6.1.4.1.4515.1.9.1.1.1.4
edfaPumpOperStatus
The current operational state of the laser.
If edfaPumpAdminStatus is down(2) then
edfaPumpOperStatus should be down(2).
If edfaPumpAdminStatus is changed to up(1) then
edfaPumpOperStatus should change to
up(1) if …
Enumeration
Enumerated Values:
1up
2down
3restart
4unknown
 .1.3.6.1.4.1.4515.1.9.1.1.1.5
edfaStatus
This variable indicates the Line Status of the
Edfa module.

The edfaStatus is a bit map represented as a
sum, therefore, it can represent multiple failures (alarms)
simultaneously.

edfaN…
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.4515.1.9.1.1.1.6
edfaVoa
The computed VOA output attenuation specified in
0.1 dB units. From 0.0 to +15.0 dB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.7
edfaAutomaticMode
Defines the Edfa automatic mode. If equals TRUE,
the Edfa control mode should selected automaticaly.
Otherwise it should be selected manualy.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4515.1.9.1.1.1.8
edfaAdminControlMode
Configure the Edfa control mode. This object
may be set only when edfaAtomaticMode is FALSE.
Enumerationr/w
Enumerated Values:
1apc
2agc
 .1.3.6.1.4.1.4515.1.9.1.1.1.9
edfaOperControlMode
The current Edfa control mode. Initialy the Edfa
starts in APC mode. The AGC mode is used only when
selected manualy or after transient input power change.
Enumeration
Enumerated Values:
1apc
2agc
 .1.3.6.1.4.1.4515.1.9.1.1.1.10
edfaAdminGain
The required Edfa Gain value given in 0.1 dB units. This value
may be configured only when the edfa automatic mode is FALSE
and the edfa control mode is Agc.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.11
edfaOperGain
The actual Edfa Gain value given in 0.1 dB units.
Value range starts with 0.0 dbm
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.12
edfaAdminOutputPower
The required Edfa output power value given in 0.1 dBm units.
The range starts with -30.0 dBm. This value
may be configured only when the edfa control mode is Apc.
The units in the case of RAMAN AMP are 0.1 mW.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.13
edfaOperOutputPower
The actual Edfa total output power value specified in 0.1 dBm units.
Valid valuse are in the range of 0.0 dBm upto +15.0 dBm.
The units in the case of RAMAN AMP are 0.1 mW.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.14
edfaChannelsNumber
The number of optical channels on this signal.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.15
edfaTotalChannelsNumber
The total number of optical channels on this fiber.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.16
edfaEyeSafetyMode
When in Eye-Safety mode the edfa reduces the laser
power budget down to safe level upon detection of an
output fiber cut.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4515.1.9.1.1.1.17
edfaShutDownLipEnable
EDFA shout-down on LIP (Loss of signal) -
enable/disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4515.1.9.1.1.1.18
edfaAutoPowerUpLipEnable
EDFA automatic power up (after signal returns) -
enable/disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4515.1.9.1.1.1.19
edfaMaxGain
The EDFA max gain is determined by the result of the VER command.
Legal values:
gainUnknown(1)
gain14dbm(2) - Booster/Inline, (-2)-14dBm output power, gain (-5)-22dB
gain17dbm(3) - Booster/Inline, (-2)-17dBm output pow…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.20
edfaGainInFrom
Lower input gain range of the edfa in units of 0.1 db.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.21
edfaGainInTo
Upper input gain range of the edfa in units of 0.1 db.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.22
edfaGainOutFrom
Lower output gain range of the edfa in units of 0.1 db.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.23
edfaGainOutTo
Upper output gain range of the edfa in units of 0.1 db.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.24
edfaPowerInFrom
Lower input power range of the edfa in units of 0.1 dbm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.25
edfaPowerInTo
Upper input power range of the edfa in units of 0.1 dbm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.26
edfaPowerOutFrom
Lower output power range of the edfa in units of 0.1 dbm.
In the case of RAMAN AMP the units are mW.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.27
edfaPowerOutTo
Upper output power range of the edfa in units of 0.1 dbm.
In the case of RAMAN AMP the units are mW.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.28
edfaFromChannel
The first channel number supported by the edfa; 0 to ignore.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.29
edfaToChannel
The last channel number supported by the edfa; 0 to ignore.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.30
edfaOscChannel
The wavelenght of the optical supervisory channel e.g. 1510, 1490.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.31
edfaRedBlueType
The type of the edaf.
Enumeration
Enumerated Values:
1red
2blue
3none
 .1.3.6.1.4.1.4515.1.9.1.1.1.32
edfaRole
The role of the edaf.
Enumeration
Enumerated Values:
1booster
2boosterInline
3preamp
4inline
5raman
6other
 .1.3.6.1.4.1.4515.1.9.1.1.1.33
edfaFreeDescription
A free text with additional edfa information.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4515.1.9.1.1.1.34
edfaConfigSafetyThreshold
The Eye Safety threshold level specified in dBm units.
The value given in 0.1 dBm units. The range starts with -50.0 dBm.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.35
edfaSigOutputPower
The measured Signal output Power.
The value is specified in ten'th of Dbm units increments, starting
from -30.0 dbm (e.g. value 0 means -30.0 dbm).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4515.1.9.1.1.1.36
edfaLossPropagation
Applicable for pre-amp.
Controls the pump behaviour in case of a LOS.
disabled - the pump is not shut-down to fasten the return-from-loss time.
enabled - the pump is shut-down when loss occurs
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.4515.1.9.1.1.1.37