SIAE-MAB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
24

mabSensorTable

table
.1.3.6.1.4.1.3373.1103.93.2 · 1 row entry · 10 columns
Open in standard view 
Table with MAB sensors entries. Each sensor is associated to a
interface, usually an interface with the physical layer
consisting of a radio link, and comapares the current bandwidth
(throughput) with the nominal one. When nominal and current
bandwidth doesn't match to PDU senders associated with a sensor
is required to send a MAB PDU every observation time.
mabSensorEntry entry .1.3.6.1.4.1.3373.1103.93.2.1
A row in the mabSensorTable.
Indexes
mabSensorIndex
Column Syntax OID
mabSensorIndex
This object identifies the MAB sensor inside the Network Element.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.93.2.1.1
mabSensorRowStatus
The status of this MAB sensor entry.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value: mabSensorIfIndex
must be set to a valid ifIndex number. Otherwise…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.93.2.1.2
mabSensorAdminStatus
Administative status of the MAB sensor.
The value down(1) turn off all MAB advisers associated with
this sensor.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.3373.1103.93.2.1.3
mabSensorIfIndex
This object accepts a greater than zero value to identify an
interface in ifTable. The throughput of the selected interface
is monitored and notified to all MAB PDU sender associated with
this sensor.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.3373.1103.93.2.1.4
mabSensorLinkId
This object set the (radio) link identifier that will be inserted
in the Link ID TLV of the MAB PDU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.93.2.1.5
mabSensorBwMode
This object defines the method of calculation of the current
bandwidth. The value of this parameter is sent inside MAB PDUs.
MabBwCalculationMethodr/w
Textual Convention: MabBwCalculationMethod Enumeration
Type Values:
1average
2min
3max
 .1.3.6.1.4.1.3373.1103.93.2.1.6
mabSensorHoldoffTime
This object defines the wait time (in seconds) for MAB protocol
before sending packets if the current bandwidth (throughput)
is lower than the nominal.
Integer32r/w
Constraints:
range: 10-60
 .1.3.6.1.4.1.3373.1103.93.2.1.7
mabSensorObservationTime
This object defines the observation time (in seconds) for MAB
protocol during which calculate the minimum, maximum and average
value of the current bandwidth (throughput). At the end of each
period, a MAB PDU is sent by…
Integer32r/w
Constraints:
range: 1-1
range: 10-10
range: 60-60
 .1.3.6.1.4.1.3373.1103.93.2.1.8
mabSensorFastTime
This value is used in place of mabSensorObservationTime for the
first mabSensorFastCount PDU packets sent by a MAB PDU sender.
The value of mabSensorFastTime must be less than or equal to
mabSensorObservationTime.
Integer32r/w
Constraints:
range: 1-59
 .1.3.6.1.4.1.3373.1103.93.2.1.9
mabSensorFastCount
This value specifies how many MAB PDU packets are sent every
mabSensorFastTime before to use the standard observation time
(mabSensorObservationTime).
Zero means which quick sending of packets is disabled.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.3373.1103.93.2.1.10

mabSensorStatusTable

table
.1.3.6.1.4.1.3373.1103.93.3 · 1 row entry · 2 columns
Open in standard view 
Table with the status of MAB sensor entries. For each row in
mabSensorTable a row is created in this table.
mabSensorStatusEntry entry .1.3.6.1.4.1.3373.1103.93.3.1
A row in the mabSensorTable.
Indexes
mabSensorIndex
Column Syntax OID
mabSensorNominalBw
This object reports the nominal bandwidth (throughput) of the
interface selected by mabSensorIfIndex.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.93.3.1.1
mabSensorCurrentBw
This object reports the current bandwidth (throughput) of the
interface selected by mabSensorIfIndex and calculated according
to the method set in mabSensorBwMode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.93.3.1.2

mabPduSenderTable

table
.1.3.6.1.4.1.3373.1103.93.4 · 1 row entry · 12 columns
Open in standard view 
Table with MAB PDU sender entries. Each PDU sender refers to an
ifIndex in ifTable on which to send a PDU MAB and a sensor that
triggers the sending.
mabPduSenderEntry entry .1.3.6.1.4.1.3373.1103.93.4.1
A row in the mabPduSenderTable.
Indexes
mabPduSenderIndex
Column Syntax OID
mabPduSenderIndex
This object identifies the MAB PDU sender inside the Network
Element.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.93.4.1.1
mabPduSenderRowStatus
The status of this mabPduSender entry.

An entry may not exist in the active state unless all objects in
the entry have an appropriate value: mabPduSenderIfIndex must be
set to a valid ifIndex number and m…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.93.4.1.2
mabPduSenderAdminStatus
Administative status of the MAB PDU sender.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.3373.1103.93.4.1.3
mabPduSenderIfIndex
This object accepts a greater than zero value to identify an
interface in ifTable. MAB PDU is sent over this interface.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.3373.1103.93.4.1.4
mabPduSenderSensorIndex
This object associates a MAB sensor to this PDU sender.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.93.4.1.5
mabPduSenderVlanId
This object defines the VLAN identifier used to tag the MAB PDU.
Zero means the PDU is not tagged.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3373.1103.93.4.1.6
mabPduSenderPcp
This object defines packet priority written into the tag of
the MAB PDU.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3373.1103.93.4.1.7
mabPduSenderOamMaintLevel
This object defines the OAM maintenance level of the MAB PDU.
The multicast destination address of the PDU is according to
the selected maintenance level:
01-80-C2-00-00-3x
where x = Maintenance Level
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3373.1103.93.4.1.8
mabPduSenderDAType
This object defines the destination MAC address type of the PDU:
- multicastDA(1): Multicast Class 1 Destination Address (DA)
- unicastDA(2): Unicast Destination Address (DA)
Enumerationr/w
Enumerated Values:
1multicastDA
2unicastDA
 .1.3.6.1.4.1.3373.1103.93.4.1.9
mabPduSenderUnicastDA
This object defines the unuicast destination address of the PDU
when mabPduSenderDAType is set to unicastDA(2).
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3373.1103.93.4.1.10
mabPduSenderOption
This object enable the option supported by the MAB PDU sender:
- enableAlways: Enable periodic PDU sending even if the
current bandwidth is equal to the nominal
bandwidth.
- e…
MabSenderOptionr/w
Textual Convention: MabSenderOption Bits
Type Values:
0enableAlways
1enableSignalFail
 .1.3.6.1.4.1.3373.1103.93.4.1.11
mabPduSenderPduCompliance
This object defines the compliance of the MAB PDU format.
MabPduCompliancer/w
Textual Convention: MabPduCompliance Enumeration
Type Values:
1stdMcmCompliant
2extMcmCompliant
3ituG8013Compliant
 .1.3.6.1.4.1.3373.1103.93.4.1.12