mabSensorRowStatus
SIAE-MAB-MIB ·
.1.3.6.1.4.1.3373.1103.93.2.1.2
Object
The status of this MAB sensor entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value: mabSensorIfIndex
must be set to a valid ifIndex number. Otherwise, the error
inconsistentValue is returned on the attempt to set active this
row.
When set to notInService changes may be made to mabSensorIfIndex.
Other objects can be changed when mabSensorRowStatus is set to
active.
A sensor can not be deleted if there is any MAB PDU sender
associated with it.
Context
- MIB
- SIAE-MAB-MIB
- OID
.1.3.6.1.4.1.3373.1103.93.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mabSensorEntry
- Table
- mabSensorTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mabSensorIndex This object identifies the MAB sensor inside the Network Element. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.93.2.1.1 |
| mabSensorFastCount This value specifies how many MAB PDU packets are sent every
mabSensorFastTime before to use the standard observation time
(mabSensorObservationTime).
Zero means which quick sendi… | column | Integer32 | .1.3.6.1.4.1.3373.1103.93.2.1.10 |
| mabSensorAdminStatus Administative status of the MAB sensor.
The value down(1) turn off all MAB advisers associated with
this sensor. | column | Enumeration | .1.3.6.1.4.1.3373.1103.93.2.1.3 |
| mabSensorIfIndex This object accepts a greater than zero value to identify an
interface in ifTable. The throughput of the selected interface
is monitored and notified to all MAB PDU sender associa… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.3373.1103.93.2.1.4 |
| mabSensorLinkId This object set the (radio) link identifier that will be inserted
in the Link ID TLV of the MAB PDU. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.93.2.1.5 |
| mabSensorBwMode This object defines the method of calculation of the current
bandwidth. The value of this parameter is sent inside MAB PDUs. | column | MabBwCalculationMethod | .1.3.6.1.4.1.3373.1103.93.2.1.6 |
| mabSensorHoldoffTime This object defines the wait time (in seconds) for MAB protocol
before sending packets if the current bandwidth (throughput)
is lower than the nominal. | column | Integer32 | .1.3.6.1.4.1.3373.1103.93.2.1.7 |
| mabSensorObservationTime This object defines the observation time (in seconds) for MAB
protocol during which calculate the minimum, maximum and average
value of the current bandwidth (throughput). At the … | column | Integer32 | .1.3.6.1.4.1.3373.1103.93.2.1.8 |
| mabSensorFastTime This value is used in place of mabSensorObservationTime for the
first mabSensorFastCount PDU packets sent by a MAB PDU sender.
The value of mabSensorFastTime must be less than or … | column | Integer32 | .1.3.6.1.4.1.3373.1103.93.2.1.9 |