RBN-BIND-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
17
.1.3.6.1.4.1.2352.2.17.1.1 · 1 row entry · 17 columns
This table contains the objects which identify and configure
circuit bindings.
          
With respect to creation and deletion of entries in this table,
rows are created or deleted when a circuit is created or
deleted - there is no explicit explicit creation or deletion
of rows allowed or required.
rbnBindEntry entry .1.3.6.1.4.1.2352.2.17.1.1.1
A conceptual row in the rbnBindTable.
Indexes
rbnBindCircuit
Column Syntax OID
rbnBindCircuit
A key identifying the circuit for which the binding applies.
Note the implication: this key identifies an existing circuit.
A basic tenent thus evolves: the circuit must exist before
it can be bound. See the definition…
RBN-TCRbnCircuitHandle
Textual Convention: RBN-TCRbnCircuitHandle OctetString
Type Constraints:
range: 8
.1.3.6.1.4.1.2352.2.17.1.1.1.1
rbnBindType
The type of the binding. See the definition of the
RbnBindType TEXTUAL-CONVENTION for the possible types.

The bind type must be appropriate to the type of circuit
that it is being applied to. See the AO…
RbnBindTyper/w
Textual Convention: RbnBindType Enumeration
Type Values:
1unbound
2authBind
3bypassBind
4interfaceBind
5subscriberBind
6l2tptunnelBind
7sessionBind
8dot1qBind
9multiIntfBind
10multiSubBind
11multiClipsBind
.1.3.6.1.4.1.2352.2.17.1.1.1.2
rbnBindName
A name associated with the binding. This field is only
applicable when the value of rbnBindType is:

bypassBind
interfaceBind
subscriberBind
l2tptunnelBind
multiIntfBind
multiSubBind
sessionBind
OctetStringr/w
Constraints:
range: 1-192
.1.3.6.1.4.1.2352.2.17.1.1.1.3
rbnBindPassword
The AAA password. This field is only applicable when
the value of rbnBindType is:

subscriberBind

If the value of rbnBindType is not this bind type,
then rbnBindPassword is not instantiated …
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.2352.2.17.1.1.1.4
rbnBindContext
The name of the context associated with the binding.

This field is applicable only when one of the following
rbnBindType values is specified:

Bind Type Value of Context
--------- ----------…
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.2352.2.17.1.1.1.5
rbnBindAuthContext
The name of the authentication context associated with
the binding. It is the name of the context to which PPP
sessions on the circuits being bound are restricted.

Specification of this column for a give…
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.2352.2.17.1.1.1.6
rbnBindServiceGrp
The name of the service access list associated with
the binding. It is the name of the service access list
that defines the services available to the PPP-encapsulated
circuit.

Specification of this colum…
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.2352.2.17.1.1.1.7
rbnBindAcl
The name of the bridge access control list associated with
the binding. It is the name of the Access control list to
be applied to the session. The access control list must
already have been configured in the context …
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.2352.2.17.1.1.1.8
rbnBindAuthChap
If 'true', specifies that the PPP authentication protocol
to be used is Challenge Handshake Authentication Protocol.

This object is applicable only when one of the following
rbnBindType values is specifie…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.2352.2.17.1.1.1.9
rbnBindAuthPap
If 'true', specifies that the PPP authentication protocol
to be used is Password Authentication Protocol.

This object is applicable only when one of the following
rbnBindType values is specified:
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.2352.2.17.1.1.1.10
rbnBindAuthWait
If 'true', specifies that the inbound CHAP authentication
is completed first. In other words, after the two sides
have decided to use CHAP, the SMS waits for the inbound
side to initiate athentication.

I…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.2352.2.17.1.1.1.11
rbnBindAuthPapFirst
If 'true', specifies that Password Authentication
Protocol (PAP) shall be negotiated before Challenge
Handshake Authentication Protocol (CHAP). IF 'false',
then CHAP is negotiated before PAP.

With SNMP g…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.2352.2.17.1.1.1.12
rbnBindMaxSessions
The maximum number of concurrent sessions allowed on the
circuit. Applicable only to circuits which have an
encapsulation of type PPPoE. If the circuit is not of
this type, then this entry is ignored.

S…
Unsigned32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.2352.2.17.1.1.1.13
rbnBindPvcSlot
The chassis slot number associated with this binding.

Use of the 'dot1qBind' type is for binding an ATM or
Frame Relay PVC to an Ethernet port using the specified
VLAN ID in rbnBindVpn.

Thi…
RBN-TCRbnSlotr/w
Textual Convention: RBN-TCRbnSlot Unsigned32
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2352.2.17.1.1.1.14
rbnBindPvcPort
The chassis port number associated with this binding.

Use of the 'dot1qBind' type is for binding an ATM or
Frame Relay PVC to an Ethernet port using the specified
VLAN ID in rbnBindVpn.

Thi…
RBN-TCRbnPortr/w
Textual Convention: RBN-TCRbnPort Unsigned32
Type Constraints:
range: 0..255
.1.3.6.1.4.1.2352.2.17.1.1.1.15
rbnBindVpn
The specific tag to which the PVC is mapped on the
specified Ethernet port.

Use of the 'dot1qBind' type is for binding an ATM or
Frame Relay PVC to an Ethernet port using the specified
VLAN ID in rbnBindV…
Unsigned32r/w
Constraints:
range: 2-4094
.1.3.6.1.4.1.2352.2.17.1.1.1.16
rbnBindAuthDhcp
If 'true', specifies an authentication mechanism where
the DHCP server makes a request to the authentication
subsystem upon receipt of incoming DHCP discover packets.

This object is applicable only when o…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.2352.2.17.1.1.1.17