rbnBindAcl
RBN-BIND-MIB ·
.1.3.6.1.4.1.2352.2.17.1.1.1.8
Object
column
r/w
OctetString
The name of the bridge access control list associated with
the binding. It is the name of the Access control list to
be applied to the session. The access control list must
already have been configured in the context of the session
peer. This is typically used to filter packets so that
only PPPoE traffic is allowed through an Ethernet L2TP
tunnel.
Specification of this column for a given entry is optional.
This object is applicable only when one of the following
rbnBindType values is specified:
sessionBind
If the value of rbnBindType is not one of these bind types,
then rbnBindAcl is not instantiated for this entry.
Context
- MIB
- RBN-BIND-MIB
- OID
.1.3.6.1.4.1.2352.2.17.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rbnBindEntry
- Table
- rbnBindTable
- Siblings
- 16
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rbnBindCircuit A key identifying the circuit for which the binding applies.
Note the implication: this key identifies an existing circuit.
A basic tenent thus evolves: the circuit must exist bef… | column | RBN-TCRbnCircuitHandle | .1.3.6.1.4.1.2352.2.17.1.1.1.1 |
| rbnBindAuthPap If 'true', specifies that the PPP authentication protocol
to be used is Password Authentication Protocol.
This object is applicable only when one of the following
r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.17.1.1.1.10 |
| rbnBindAuthWait If 'true', specifies that the inbound CHAP authentication
is completed first. In other words, after the two sides
have decided to use CHAP, the SMS waits for the inbound
side to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.17.1.1.1.11 |
| rbnBindAuthPapFirst If 'true', specifies that Password Authentication
Protocol (PAP) shall be negotiated before Challenge
Handshake Authentication Protocol (CHAP). IF 'false',
then CHAP is negotiate… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.17.1.1.1.12 |
| rbnBindMaxSessions The maximum number of concurrent sessions allowed on the
circuit. Applicable only to circuits which have an
encapsulation of type PPPoE. If the circuit is not of
this type, then… | column | Unsigned32 | .1.3.6.1.4.1.2352.2.17.1.1.1.13 |
| rbnBindPvcSlot The chassis slot number associated with this binding.
Use of the 'dot1qBind' type is for binding an ATM or
Frame Relay PVC to an Ethernet port using the specified
V… | column | RBN-TCRbnSlot | .1.3.6.1.4.1.2352.2.17.1.1.1.14 |
| rbnBindPvcPort The chassis port number associated with this binding.
Use of the 'dot1qBind' type is for binding an ATM or
Frame Relay PVC to an Ethernet port using the specified
V… | column | RBN-TCRbnPort | .1.3.6.1.4.1.2352.2.17.1.1.1.15 |
| rbnBindVpn The specific tag to which the PVC is mapped on the
specified Ethernet port.
Use of the 'dot1qBind' type is for binding an ATM or
Frame Relay PVC to an Ethernet port… | column | Unsigned32 | .1.3.6.1.4.1.2352.2.17.1.1.1.16 |
| rbnBindAuthDhcp If 'true', specifies an authentication mechanism where
the DHCP server makes a request to the authentication
subsystem upon receipt of incoming DHCP discover packets.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.17.1.1.1.17 |
| rbnBindType The type of the binding. See the definition of the
RbnBindType TEXTUAL-CONVENTION for the possible types.
The bind type must be appropriate to the type of circuit
… | column | RbnBindType | .1.3.6.1.4.1.2352.2.17.1.1.1.2 |
| rbnBindName A name associated with the binding. This field is only
applicable when the value of rbnBindType is:
bypassBind
interfaceBind
subscriberBind
l2tptunnelBind
multiIntf… | column | OctetString | .1.3.6.1.4.1.2352.2.17.1.1.1.3 |
| rbnBindPassword The AAA password. This field is only applicable when
the value of rbnBindType is:
subscriberBind
If the value of rbnBindType is not this bind type,
t… | column | OctetString | .1.3.6.1.4.1.2352.2.17.1.1.1.4 |
| rbnBindContext The name of the context associated with the binding.
This field is applicable only when one of the following
rbnBindType values is specified:
Bind Ty… | column | OctetString | .1.3.6.1.4.1.2352.2.17.1.1.1.5 |
| rbnBindAuthContext The name of the authentication context associated with
the binding. It is the name of the context to which PPP
sessions on the circuits being bound are restricted.
… | column | OctetString | .1.3.6.1.4.1.2352.2.17.1.1.1.6 |
| rbnBindServiceGrp The name of the service access list associated with
the binding. It is the name of the service access list
that defines the services available to the PPP-encapsulated
circuit.
… | column | OctetString | .1.3.6.1.4.1.2352.2.17.1.1.1.7 |
| rbnBindAuthChap If 'true', specifies that the PPP authentication protocol
to be used is Challenge Handshake Authentication Protocol.
This object is applicable only when one of the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.17.1.1.1.9 |