QTECH-FIBER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
65
qtechFiberTable
table.1.3.6.1.4.1.27514.1.1.10.2.105.1.1
·
1 row entry
·
65 columns
A table for getting Fiber Module information
Entry of a Fiber Module information.
Indexes
qtechFiberPortIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
qtechFiberPortIndex
Port index of the port.
|
QTECH-TCIfIndex Textual Convention: QTECH-TCIfIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberPortDescr
Discription of the port.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransceiverType
Transceiver type of the Fiber module insered into the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberConnectorType
Connector type of the Fiber module insered into the port.
If the transceiver type of Fiber module is unknown(1), then this object contains a zero value. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberWavelength
The value of wavelength of the Fiber module insered into the port.
If the transceiver type of Fiber module is either fiber100CopperSFP(7) or fiber1000CopperSFP(13) (or fiber10GCopperSFPPlus(14), or fiber10GCopperXFP(… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistanceSMF
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using sin… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistance62point5umOM1
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 62.… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistance62point5um
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 62.… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistance50umOM2
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistance50um
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistance50umOM3
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistanceEBW50um
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 200… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistanceCopper
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using cop… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTransferDistanceCableAssembly
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length of the Cable assembly passive. The value is in units of meters. A value of zero means that the transceiver … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberDDMSupportStatus
This object indicates that whether the Digital Diagnostic Monitors is implemeted.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberSerialNumber
The serial number of the Fiber module insered into the port.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTemp
The temperature of the Fiber module insered into the port.
The value is in units of degrees Celsius. If the qtechFiberDDMSupportStatus is false, the temperature value is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTempStatus
The status ok(2) indicates that the temperature of the Fiber module is in
the normal level. The status warning(3) indicates that the temperature of the Fiber module exceeds high warning level or is below low warning le… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberVoltage
The voltage of the Fiber module insered into the port.
The value is in units of mVolts. If the qtechFiberDDMSupportStatus is false, the voltage value is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberVoltageStatus
The status ok(2) indicates that the voltage of the Fiber module is in
the normal level. The status warning(3) indicates that the voltage of the Fiber module exceeds high warning level or is below low warning level. Th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberBias
The bias of the Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the bias value is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberBiasStatus
The status ok(2) indicates that the bias of the Fiber module is in
the normal level. The status warning(3) indicates that the bias of the Fiber module exceeds high warning level or is below low warning level. The stat… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1Bias
The bias in Channel 1 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 1 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1BiasStatus
The status ok(2) indicates that the bias in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 1 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2Bias
The bias in Channel 2 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 2 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2BiasStatus
The status ok(2) indicates that the bias in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 2 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3Bias
The bias in Channel 3 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 3 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3BiasStatus
The status ok(2) indicates that the bias in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 3 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4Bias
The bias in Channel 4 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 4 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4BiasStatus
The status ok(2) indicates that the bias in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 4 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberRXpowerIntegerpart
The integer part of Rx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part of… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberRXpowerDecimalpart
The decimal part of Rx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the decimal part of… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberRXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3). If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP (or not … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberRXpowerStatus
The status ok(2) indicates that the Rx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Rx power of the Fiber module exceeds high warning level or is below low warning level. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1RXpowerIntegerpart
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1RXpowerDecimalpart
The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 1 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 1 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.38 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2RXpowerIntegerpart
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.39 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2RXpowerDecimalpart
The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.40 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 2 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.41 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 2 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.42 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3RXpowerIntegerpart
The integer part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.43 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3RXpowerDecimalpart
The decimal part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.44 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 3 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.45 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 3 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.46 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4RXpowerIntegerpart
The integer part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.47 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4RXpowerDecimalpart
The decimal part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.48 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 4 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.49 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 4 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.50 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTXpowerIntegerpart
The integer part of Tx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part of… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.51 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTXpowerDecimalpart
The decimal part of Tx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the decimal part of… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.52 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberTXpowerStatus
The status ok(2) indicates that the Tx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Tx power of the Fiber module exceeds high warning level or is below low warning level. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.53 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1TXpowerIntegerpart
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.54 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1TXpowerDecimalpart
The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.55 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel1TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 1 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.56 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2TXpowerIntegerpart
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.57 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2TXpowerDecimalpart
The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.58 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel2TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 2 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.59 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3TXpowerIntegerpart
The integer part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.60 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3TXpowerDecimalpart
The decimal part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.61 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel3TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 3 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.62 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4TXpowerIntegerpart
The integer part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.63 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4TXpowerDecimalpart
The decimal part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.64 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
qtechFiberChannel4TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 4 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.65 |