qtechFiberVoltage
QTECH-FIBER-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.19
Object
column
Integer32
The voltage of the Fiber module insered into the port. The value is in units of mVolts. If the qtechFiberDDMSupportStatus is false, the voltage value is 0.
Context
- MIB
- QTECH-FIBER-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- qtechFiberEntry
- Table
- qtechFiberTable
- Siblings
- 64
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechFiberPortIndex Port index of the port. | column | QTECH-TCIfIndex | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.1 |
| qtechFiberTransferDistance50um The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.10 |
| qtechFiberTransferDistance50umOM3 The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.11 |
| qtechFiberTransferDistanceEBW50um The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.12 |
| qtechFiberTransferDistanceCopper The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.13 |
| qtechFiberTransferDistanceCableAssembly The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length of the Cable assembly passive.
The value is in units of meters.
A v… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.14 |
| qtechFiberDDMSupportStatus This object indicates that whether the Digital Diagnostic Monitors is implemeted. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.15 |
| qtechFiberSerialNumber The serial number of the Fiber module insered into the port. | column | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.16 |
| qtechFiberTemp The temperature of the Fiber module insered into the port.
The value is in units of degrees Celsius.
If the qtechFiberDDMSupportStatus is false, the temperature value is 0. | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.17 |
| qtechFiberTempStatus The status ok(2) indicates that the temperature of the Fiber module is in
the normal level. The status warning(3) indicates that the temperature of
the Fiber module exceeds high … | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.18 |
| qtechFiberPortDescr Discription of the port. | column | OctetString | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.2 |
| qtechFiberVoltageStatus The status ok(2) indicates that the voltage of the Fiber module is in
the normal level. The status warning(3) indicates that the voltage of
the Fiber module exceeds high warning … | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.20 |
| qtechFiberBias The bias of the Fiber module insered into the port.
The value is in units of uA.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
neither SFP/SFP+ nor XFP, … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.21 |
| qtechFiberBiasStatus The status ok(2) indicates that the bias of the Fiber module is in
the normal level. The status warning(3) indicates that the bias of
the Fiber module exceeds high warning level … | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.22 |
| qtechFiberChannel1Bias The bias in Channel 1 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
not QSF… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.23 |
| qtechFiberChannel1BiasStatus The status ok(2) indicates that the bias in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 1 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.24 |
| qtechFiberChannel2Bias The bias in Channel 2 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
not QSF… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.25 |
| qtechFiberChannel2BiasStatus The status ok(2) indicates that the bias in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 2 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.26 |
| qtechFiberChannel3Bias The bias in Channel 3 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
not QSF… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.27 |
| qtechFiberChannel3BiasStatus The status ok(2) indicates that the bias in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 3 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.28 |
| qtechFiberChannel4Bias The bias in Channel 4 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
not QSF… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.29 |
| qtechFiberTransceiverType Transceiver type of the Fiber module insered into the port. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.3 |
| qtechFiberChannel4BiasStatus The status ok(2) indicates that the bias in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 4 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.30 |
| qtechFiberRXpowerIntegerpart The integer part of Rx power of the Fiber module insered into the port.
The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
neith… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.31 |
| qtechFiberRXpowerDecimalpart The decimal part of Rx power of the Fiber module insered into the port.
The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
neith… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.32 |
| qtechFiberRXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3).
If the qtechFiberDDMSupportStatus is false or the Fiber module ty… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.33 |
| qtechFiberRXpowerStatus The status ok(2) indicates that the Rx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Rx power of
the Fiber module exceeds high warnin… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.34 |
| qtechFiberChannel1RXpowerIntegerpart The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.35 |
| qtechFiberChannel1RXpowerDecimalpart The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.36 |
| qtechFiberChannel1RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 1 of QSFP+.
If the qtechFiberDDMSupportStatus is false … | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.37 |
| qtechFiberChannel1RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 1 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.38 |
| qtechFiberChannel2RXpowerIntegerpart The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.39 |
| qtechFiberConnectorType Connector type of the Fiber module insered into the port.
If the transceiver type of Fiber module is unknown(1), then this
object contains a zero value. | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.4 |
| qtechFiberChannel2RXpowerDecimalpart The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.40 |
| qtechFiberChannel2RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 2 of QSFP+.
If the qtechFiberDDMSupportStatus is false … | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.41 |
| qtechFiberChannel2RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 2 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.42 |
| qtechFiberChannel3RXpowerIntegerpart The integer part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.43 |
| qtechFiberChannel3RXpowerDecimalpart The decimal part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.44 |
| qtechFiberChannel3RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 3 of QSFP+.
If the qtechFiberDDMSupportStatus is false … | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.45 |
| qtechFiberChannel3RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 3 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.46 |
| qtechFiberChannel4RXpowerIntegerpart The integer part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.47 |
| qtechFiberChannel4RXpowerDecimalpart The decimal part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.48 |
| qtechFiberChannel4RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 4 of QSFP+.
If the qtechFiberDDMSupportStatus is false … | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.49 |
| qtechFiberWavelength The value of wavelength of the Fiber module insered into the port.
If the transceiver type of Fiber module is either fiber100CopperSFP(7)
or fiber1000CopperSFP(13) (or fiber10GC… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.5 |
| qtechFiberChannel4RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 4 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.50 |
| qtechFiberTXpowerIntegerpart The integer part of Tx power of the Fiber module insered into the port.
The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
neith… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.51 |
| qtechFiberTXpowerDecimalpart The decimal part of Tx power of the Fiber module insered into the port.
The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber module type is
neith… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.52 |
| qtechFiberTXpowerStatus The status ok(2) indicates that the Tx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Tx power of
the Fiber module exceeds high warnin… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.53 |
| qtechFiberChannel1TXpowerIntegerpart The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.54 |
| qtechFiberChannel1TXpowerDecimalpart The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.55 |
| qtechFiberChannel1TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 1 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.56 |
| qtechFiberChannel2TXpowerIntegerpart The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.57 |
| qtechFiberChannel2TXpowerDecimalpart The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.58 |
| qtechFiberChannel2TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 2 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.59 |
| qtechFiberTransferDistanceSMF The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.6 |
| qtechFiberChannel3TXpowerIntegerpart The integer part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.60 |
| qtechFiberChannel3TXpowerDecimalpart The decimal part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.61 |
| qtechFiberChannel3TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 3 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.62 |
| qtechFiberChannel4TXpowerIntegerpart The integer part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.63 |
| qtechFiberChannel4TXpowerDecimalpart The decimal part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the qtechFiberDDMSupportStatus is false or the Fiber m… | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.64 |
| qtechFiberChannel4TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 4 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.65 |
| qtechFiberTransferDistance62point5umOM1 The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.7 |
| qtechFiberTransferDistance62point5um The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.8 |
| qtechFiberTransferDistance50umOM2 The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.9 |