PKT-STORM-CTRL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
12

swPktStormCtrlTable

table
.1.3.6.1.4.1.171.12.25.3.1 · 1 row entry · 12 columns
Open in standard view 
A table that contains information about packet storm control.
A S/W mechanism is provided to monitor the traffic rate in addition
 to the H/W storm control mechanism. If the traffic rate is too high,
 this port will be shut down.
swPktStormCtrlEntry entry .1.3.6.1.4.1.171.12.25.3.1.1
A list of information for each port of the device.
Indexes
swPktStormCtrlPortIndex
Column Syntax OID
swPktStormCtrlPortIndex
This object indicates the device's port number.(1..Max port
number in the device).It is used to specify a range of ports to be
configured.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.25.3.1.1.1
swPktStormCtrlthreshold obsolete
This object is the upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determined by…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.25.3.1.1.2
swPktStormCtrlBroadcastStatus
This object indicates whether the broadcast storm control is enabled or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.171.12.25.3.1.1.3
swPktStormCtrlMulticastStatus
This object indicates whether the multicast storm control is enabled or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.171.12.25.3.1.1.4
swPktStormCtrlUnicastStatus
This object indicates whether the unicast(Destination Loopback Fail) storm control is enabled
or disabled.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.171.12.25.3.1.1.5
swPktStormCtrlActionStatus
There are two actions to take for storm control, shutdown and drop. The
former is implemented in S/W, and the latter is implemented in H/W. If a user
chooses shutdown, they will need to configure both the back_off and t…
Enumerationr/w
Enumerated Values:
1shutdown
2drop
 .1.3.6.1.4.1.171.12.25.3.1.1.6
swPktStormCtrlCountDown
If a packet storm has been encountered continuously on a given port for a long
period of time (indicated by the value of this object), the port will be shut
down forever until it's recovered manually.
Note:
The max entr…
minutesSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.25.3.1.1.7
swPktStormCtrlTimeinterval
This object is the sampling interval of received packet counts.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the max number, it is determined by the project itself.
secondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.25.3.1.1.8
swPktStormCtrlShutdownForever
This object indicates whether the storm control is shut down forever or not.
This command recover it manually. If support auto-recover mechanism, the object is no use.
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.171.12.25.3.1.1.9
swPktStormCtrlBCastThreshold
The upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determined by the project it…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.25.3.1.1.10
swPktStormCtrlMCastThreshold
This object indicates the upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determ…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.25.3.1.1.11
swPktStormCtrlUnicastThreshold
This object indicates the upper threshold at which the specified storm control will turn on.
Note:
The max entry range is (M..N), the value M means the minimum number,
the value N means the maximuim number, it is determ…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.25.3.1.1.12