PACKETPORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

ppCfgPortTable

table

.1.3.6.1.4.1.4115.10.1.1 · 1 row entry · 25 columns

Open in standard view

This table is used to define the configurable data on a per port basis.

ppCfgPortEntry entry .1.3.6.1.4.1.4115.10.1.1.1

An entry in the Configuration Port table.

Indexes

ppCfgPortPortNumber

Column Syntax OID

ppCfgPortPortNumber

The unique value which identifies the port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4115.10.1.1.1.1

ppCfgPortAdminState

The administrative state of the line.

Enumeration

Enumerated Values:

1	oos
2	is

.1.3.6.1.4.1.4115.10.1.1.1.2

ppCfgPortCallAgentName

Call agent domain name.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4115.10.1.1.1.3

ppCfgPortCallAgentIpAddress obsolete

Call Agent IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.4115.10.1.1.1.4

ppCfgPortProvSignalingProt obsolete

The provisioned signaling protocol on the port.

SignalingProtocol

Textual Convention: SignalingProtocol Enumeration

Type Values:

0	none
1	ncs

.1.3.6.1.4.1.4115.10.1.1.1.5

ppCfgPortLoopCurrent

This object provides the ability to set the
loop current high or low.

Enumerationr/w

Enumerated Values:

1	normal
2	high

.1.3.6.1.4.1.4115.10.1.1.1.6

ppCfgPortTpar obsolete

This object contains the maximum value of partial dial
timeout in seconds.

Integer32

Constraints:
range: 12-20

.1.3.6.1.4.1.4115.10.1.1.1.7

ppCfgPortTcrit obsolete

This object contains the maximum value of critical dial
timeout in seconds.

Integer32

Constraints:
range: 3-5

.1.3.6.1.4.1.4115.10.1.1.1.8

ppCfgPortBusyToneTimeOut obsolete

Busy tone time out value.

Integer32

Constraints:
range: 23-37

.1.3.6.1.4.1.4115.10.1.1.1.9

ppCfgPortDialToneTimeOut obsolete

Dial tone time out value.

Integer32

Constraints:
range: 12-20

.1.3.6.1.4.1.4115.10.1.1.1.10

ppCfgPortMsgWaitTimeOut obsolete

Message waiting time out value.

Integer32

Constraints:
range: 12-20

.1.3.6.1.4.1.4115.10.1.1.1.11

ppCfgPortOffHookWarnTimeOut obsolete

Off hook warning time out value.

Integer32

Constraints:
range: 0-60

.1.3.6.1.4.1.4115.10.1.1.1.12

ppCfgPortRingingTimeOut obsolete

Ringing time out value.

Integer32

Constraints:
range: 135-225

.1.3.6.1.4.1.4115.10.1.1.1.13

ppCfgPortRingBackTimeOut obsolete

RingBack time out value.

Integer32

Constraints:
range: 135-225

.1.3.6.1.4.1.4115.10.1.1.1.14

ppCfgPortReorderTimeOut obsolete

Reorder time out value.

Integer32

Constraints:
range: 23-37

.1.3.6.1.4.1.4115.10.1.1.1.15

ppCfgPortStutterDialToneTimeOut obsolete

Stutter dial tone time out value

Integer32

Constraints:
range: 12-20

.1.3.6.1.4.1.4115.10.1.1.1.16

ppCfgPortMaxWaitDelay obsolete

This object contains the maximum number
of seconds a MTA waits after a restart.

Integer32

Constraints:
range: 450-750

.1.3.6.1.4.1.4115.10.1.1.1.17

ppCfgPortCallAgentUdpPort

This object contains the call agent udp port that is
being used for this instance of call signaling.

Integer32

Constraints:
range: 1025-65535

.1.3.6.1.4.1.4115.10.1.1.1.18

ppCfgPortTxGainControl

The gain control setting (dB) in the upstream, or A-to-D,
direction. Setting this value for either line will take
affect on ALL telephony lines.

Integer32r/w

Constraints:
range: -2-2

.1.3.6.1.4.1.4115.10.1.1.1.19

ppCfgPortRxGainControl

The gain control setting (dB) in the downstream, or D-to-A,
direction. Setting this value for either line will take
affect on ALL telephony lines.

Integer32r/w

Constraints:
range: -2-2

.1.3.6.1.4.1.4115.10.1.1.1.20

ppCfgPortLocUserIndication

Treatement/Tone applied in loss of communication (LOC) scenarios.

Enumerationr/w

Enumerated Values:

0	silence
1	reorderTone

.1.3.6.1.4.1.4115.10.1.1.1.21

ppCfgPortPacketizationPeriod obsolete

The per line packetization period for codec type.

millisecondsPacketizationPeriodType

Textual Convention: PacketizationPeriodType Enumeration

Type Values:

10	ten
20	twenty
30	thirty

.1.3.6.1.4.1.4115.10.1.1.1.22

ppCfgPortCodec obsolete

The per line codec type gxxxx.

CodecType

Textual Convention: CodecType Enumeration

Type Values:

1	g711u
2	g711a
3	g7231
4	g729
5	g729a
6	g729e
7	g726
8	g728

.1.3.6.1.4.1.4115.10.1.1.1.23

ppCfgPortDialingMethod deprecated

Indicates the method used to dial the digits for this telephony
endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2),
dial-pulse signaling is used to dial the digits, Tone dialing(DTMF) is
disabled. If Tone &…

Enumerationr/w

Enumerated Values:

1	tone
2	pulse
3	toneAndPulse
4	pulseWithDTMFRelay
5	toneAndPulseWithDTMFRelay

.1.3.6.1.4.1.4115.10.1.1.1.24

ppCfgPortT38MaxDatagram

Specifies the T38 Max Datagram size for incoming T38 packets. If this is used to
allow larger incoming T38 packets then the Call Agent must allocate more bandwidth
accordingly

Integer32r/w

Constraints:
range: 160-65535

.1.3.6.1.4.1.4115.10.1.1.1.25

ppSurvPortTable

table

.1.3.6.1.4.1.4115.10.2.1 · 1 row entry · 6 columns

Open in standard view

This table is used to define the surveillance data on a per port basis.

ppSurvPortEntry entry .1.3.6.1.4.1.4115.10.2.1.1

An entry in the Configuration Port table.

Indexes

ppSurvPortNumber

Column Syntax OID

ppSurvPortNumber

The unique value which identifies the port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4115.10.2.1.1.1

ppSurvPortMaintState

The maintenance state of the line.

Enumeration

Enumerated Values:

1	isnr
2	isnr-trafbsy
3	istrbl-mismatch
4	istrbl-fef
5	istrbl-tstf
6	istrbl-diag
7	istrbl-lcprt
8	oosnr-unprov
9	oosnr
10	oostrbl
11	oostrbl-tstf
12	oostrbl-diag
13	oostrbl-lcprt

.1.3.6.1.4.1.4115.10.2.1.1.2

ppSurvPortDigitMap obsolete

The digit map set by the call agent.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4115.10.2.1.1.3

ppSurvPortLcDiagRequest

Setting this value to true will send a
diagnostics request on the line. Reading this
value will always return false. The
maintenance state of the line indicates
if diagnostics are being run on the line.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4115.10.2.1.1.4

ppSurvPortDeprovRequest

Setting this value to true will send a
deprovisioning request on the line. Reading this
value will always return false. The maintenance
state of the line will indicate if the
line is deprovisioned.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4115.10.2.1.1.5

ppSurvPortLcDiagLastResult

The last result of diags for this line. If diagnostics
are in progress it will return results pending.

Enumeration

Enumerated Values:

1	diagnostics-passed
2	slac-revision-failure
3	mpi-failure
4	power-or-clock-failure
5	pcm-failure
6	standby-hook-failure
7	active-hook-failure
8	vf-failure
9	ringing-failure
10	invalid-state-to-init-diags
11	line-is-unprovisioned
12	diagnostics-results-pending

.1.3.6.1.4.1.4115.10.2.1.1.6

ppSurvMtaCodecCapTable

table obsolete

.1.3.6.1.4.1.4115.10.2.2 · 1 row entry · 2 columns

Open in standard view

This table describes the codec capabilities
of the Packetport.

ppSurvMtaCodecCapEntry entry .1.3.6.1.4.1.4115.10.2.2.1

An entry in the MTA codec capabilities table.

Indexes

ppSurvMtaCodecCapIndex

Column Syntax OID

ppSurvMtaCodecCapIndex obsolete

The index for this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4115.10.2.2.1.1

ppSurvMtaCodecCapType obsolete

A codec type supported by this device.

CodecType

Textual Convention: CodecType Enumeration

Type Values:

1	g711u
2	g711a
3	g7231
4	g729
5	g729a
6	g729e
7	g726
8	g728

.1.3.6.1.4.1.4115.10.2.2.1.2

ppSurvMtaSigCapTable

table obsolete

.1.3.6.1.4.1.4115.10.2.3 · 1 row entry · 2 columns

Open in standard view

A table of the signaling capabilities of the Packetport.

ppSurvMtaSigCapEntry entry .1.3.6.1.4.1.4115.10.2.3.1

An entry in the signaling capabilities table.

Indexes

ppSurvMtaSigCapIndex

Column Syntax OID

ppSurvMtaSigCapIndex obsolete

The index for this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4115.10.2.3.1.1

ppSurvMtaSigCapProtocol obsolete

A signaling protocol this device supports.

SignalingProtocol

Textual Convention: SignalingProtocol Enumeration

Type Values:

0	none
1	ncs

.1.3.6.1.4.1.4115.10.2.3.1.2

ppSurvMtaDevDebugLevelControlTable

table

.1.3.6.1.4.1.4115.10.2.18.1 · 1 row entry · 2 columns

Open in standard view

This table allows control of the reporting of debug messages in
the PacketPort device. For each system module (i.e. subsystem)
of the device, a specific reporting level may be chosen.

ppSurvMtaDevDebugLevelControlEntry entry .1.3.6.1.4.1.4115.10.2.18.1.1

Allows configuration of the reporting of debug messages for a
particular system module in the PacketPort device.

Indexes

ppSurvMtaDevDebugModule

Column Syntax OID

ppSurvMtaDevDebugModule

The system module to which this entry applies.

Enumeration

Enumerated Values:

1	generic
2	callP
3	dsp
4	lineCard
5	ppMtc
6	rtp

.1.3.6.1.4.1.4115.10.2.18.1.1.1

ppSurvMtaDevDebugReportingLevel

Controls the level of debugging output for a particular
system module.

PpDebugReportingLevelr/w

Textual Convention: PpDebugReportingLevel Enumeration

Type Values:

0	off
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7
8	level8
9	level9
10	level10

.1.3.6.1.4.1.4115.10.2.18.1.1.2